June 2006 - Musix-users - lists.ourproject.org

Wouhou ! Solution for network problem (Problems with 0.49)
by julien bodd 01 Jul '06

01 Jul '06

Marco ! carajo, the error is corrected.. I realized that after boot..that I don't have any "lo" interface up! (with ifconfig) Wierd! I checked the file : /etc/network/interfaces, and it was ok : > auto lo eth0 > iface lo inet loopback > iface eth0 inet dhcp It seems that /etc/init.d/networking start does not perform well.. After boot..only the eth0 is up. And sometimes, nothing..In those cases..I was performing a : Musix -->Programs -->Knoppix -->Net-->network card configuration. Then, surprising, again only eth0 were up. Still no loopback. So I checked the /etc/init.d/networking script..and saw that the restart option does not make a ifdown of the loopback.. I checked the execution of /etc/init.d/networking restart , and SURPRISING, still no loopback after..I suppose that Musix -->Programs -->Knoppix -->Net-->network card configuration use that script.. So I executed myself an : ifdown -a and after an ifup -a.. And : WOUHOU..eth0 and loopback are there... !!! AND ALL APPS ARE WORKING !!!! Hmmm..for now, I'll put ifdown and ifup in an init script..so I can finally play with Musix. Do you have any idea for the strange behavior? Thank you for the strace tip ! Julien.

2 2

Wouhou ! Solution for network problem (Problems with 0.49) (seq2)
by julien bodd 30 Jun '06

30 Jun '06

For info, the solution I adopted for now is modifying the /etc/init.d/networking script as so (i just give the changes in comments) : case "$1" in start) process_options log_action_begin_msg "Configuring network interfaces" ###### JULIEN'S ADD (ifdown -a) ##### ifdown -a if ifup -a; then log_action_end_msg $? else log_action_end_msg $? fi ;; stop) if sed -n 's/^[^ ]* $[^ ]*$ $[^ ]*$ .*$/\2/p' /proc/mounts | grep -qE '^(nfs[1234]?|smbfs|ncp|ncpfs|coda|cifs)$'; then log_warning_msg "not deconfiguring network interfaces: network shares still mounted." exit 0 fi log_action_begin_msg "Deconfiguring network interfaces" ##### JULIEN'S REMOVE --exclude=lo ##### # if ifdown -a --exclude=lo; then if ifdown -a; then log_action_end_msg $? else log_action_end_msg $? fi ;; force-reload|restart) process_options log_action_begin_msg "Reconfiguring network interfaces" #### JULIEN'S REMOVE --exclude=lo #### # ifdown -a --exclude=lo || true ifdown -a || true if ifup -a --exclude=lo; then log_action_end_msg $? else log_action_end_msg $? fi ;; That's it ! now all works fine ! Thank you very much Marco. Anyway, with all that carajo things I learned new things about linux.. ++ Julien.

1 0

[Re] : DON INSTALL UDEV! until you try strace :D (Marcos Guglielmetti)
by julien bodd 30 Jun '06

30 Jun '06

Ooooo, carajo, its a socket connect() problem ! With strace on kate, we have : execve("/usr/bin/kate", ["kate"], [/* 25 vars */]) = 0 uname({sys="Linux", node="julien", ...}) = 0 brk(0) = 0x804a000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7eeb0 00 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7eea0 00 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=74612, ...}) = 0 mmap2(NULL, 74612, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7ed7000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libkdeinit_kate.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20$\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=24420, ...}) = 0 mmap2(NULL, 27300, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ed000 0 mmap2(0xb7ed6000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3 , 0x5) = 0xb7ed6000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libstdc++.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\307"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=892628, ...}) = 0 mmap2(NULL, 919172, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7def0 00 mmap2(0xb7ec5000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd5) = 0xb7ec5000 mmap2(0xb7eca000, 22148, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7eca000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`3\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=149264, ...}) = 0 julien@julien:~$ tail -30 /tmp/strace-kate.txt open("/usr/lib/i486-linux-gnu/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/cmov", 0xbfdfd170) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu", {st_mode=S_IFDIR|0755, st_size=48, ...}) = 0 munmap(0xb5e53000, 74612) = 0 open("/etc/ld.so.cache", O_RDONLY) = 10 fstat64(10, {st_mode=S_IFREG|0644, st_size=74612, ...}) = 0 mmap2(NULL, 74612, PROT_READ, MAP_PRIVATE, 10, 0) = 0xb5e53000 close(10) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/libnss_files.so.2", O_RDONLY) = 10 read(10, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\33"..., 512) = 512 fstat64(10, {st_mode=S_IFREG|0644, st_size=42472, ...}) = 0 mmap2(NULL, 45720, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 10, 0) = 0xb5e47000 mmap2(0xb5e51000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 10, 0x9) = 0xb5e51000 close(10) = 0 munmap(0xb5e53000, 74612) = 0 open("/etc/rpc", O_RDONLY) = 10 fcntl64(10, F_GETFD) = 0 fcntl64(10, F_SETFD, FD_CLOEXEC) = 0 fstat64(10, {st_mode=S_IFREG|0644, st_size=887, ...}) = 0 mmap2(NULL, 131072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb5e27000 read(10, "# This file contains user readab"..., 131072) = 887 close(10) = 0 munmap(0xb5e27000, 131072) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 10 bind(10, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 connect(10, {sa_family=AF_INET, sin_port=htons(111), sin_addr=inet_addr(" 127.0.0.1")}, 16 Quite similar with firefox, when I want to "save link...". I just put the last lines.. : socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 48 bind(48, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 connect(48, {sa_family=AF_INET, sin_port=htons(111), sin_addr=inet_addr(" 127.0.0.1")}, 16) strace is a real geek command. Is that how some begin reverse engineering? Anyway..Hmm..I don't see why socket problem..:-) I didn't intall udev..! See u.

1 0

DON INSTALL UDEV! until you try strace :D (seq2)
by julien bodd 30 Jun '06

30 Jun '06

> socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 10 > bind(10, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr(" 0.0.0.0")}, 16) = 0 > connect(10, {sa_family=AF_INET, sin_port=htons(111), sin_addr=inet_addr(" 127.0.0.1")}, 16 As far as I know, with a TCP socket, before a connect..there has to be on the server part an accept.. It is strange..it creates a socket..and after..it wants itself to connect to the same socket?? In fact, they have the same socket id (the socket created..and the one we connect to..), it seems the connect show correct address (127.0.0.1)..but what is the 0.0.0.0 on the bind operation? Could the problem come from a bad network configuration? (I didn't configured anything..) What I know is that sometimes..I have direct access to the net..some other times..I have to perform a netcardconfigurations (wich performs a dhcp broadcast..) See u. Julien.

2 1

Re: GINA24 firmware issue
by Marcos Guglielmetti 29 Jun '06

29 Jun '06

Hola MNO: Bravo! I fowarded it to RMS Thanks > On 6/29/06, Sales <sales(a)echoaudio.com> wrote: > > MNO wrote: > > > Dear EchoAudio Management, > > > > > > I'm a Gina24 owner and I'm trying to get it working on a Gnu/Linux > > > Live CD named MUSIX (A complete OS + all the software to make music > > > that can run from CD instead of a Harddisk) http://www.musix.org.ar/ > > > > > > The Musix distro is based on GNU GPL and thus it impossible for them > > > to include the Gina24 firmware on their CD. > > > > > > Now, since i bought a Gina24 i find it a bit strange that i cant use a > > > perfectly fine tool because of a simple issue like this. I now own the > > > hardware, but may not use it because of a licence issue. Is there a > > > way to make the firmware available, and open a bigger market for your > > > products, by making it possible to distribute it? > > > > > > If i can use my 'old' hardware until it is realy old, then i'm > > > mostlikely to buy from the same manufacturer once i realy need to > > > upgrade. Now i'm almost forced to buy from another company that DOES > > > enable me to work with GNU GPL software. > > > > > > And since this hardware might be already 'old' form your perspective, > > > is it eventually possible to provide the GNU/Linux users the complete > > > info to build their own firmware? I'm very disappointed that I'm not > > > able to use the product that i now OWN. (i paid a lot of money for it) > > > > > > I know it is possible to get the interface working under GNU/Linux > > > when the drivers and firmware are installed and configured on a > > > harddisk. (with a lot of hassle to configure due to firmware that can > > > not be distributed) But in case of a live CD distro then the current > > > licence forbids it to distribute the firmware. > > > > > > And on top of all this, the firmware is only usable on the hardware, > > > and thus those people need to be your customers after all. > > > > > > Please give it some thought. > > > > > > I'll be glad to help and find the right people to get this working. > > > > > > The most direct approach would be contacting Richard Stallman > > > rms(a)gnu.org. > > > > > > It would be great to see all EchoAudio hardware listed there > > > http://www.fsf.org/resources/hw/soundcards/ > > > > > > Please let me know your standpoint, so that i know if i need upgrade > > > to an alternative, or that i'm able to keep using the EchoAudio > > > GINA24. And that i can upgrade to another EchoAudio product somewhere > > > in the future. > > > > > > > > > Kind Regards, > > > > > > Mano Stienen > > > > Mano - > > > > Sorry, we supply open source for our software but we have no intention > > of providing open source for our firmware. We are not a non-profit > > organization, and our firmware license agreements are a vital part of > > our business. > > > > Thanks, > > > > Echo Sales > > Thanks for the quick reply, but... > > Your hardware is a vital part of many businesses, please do not ignore > the fact that MANY people are moving to GNU and they will get into the > very same issues like me. All respect for doing business, nothing > wrong with that, but you are missing out on a whole new market, and > you will also lose cusomers. Once again, please help me to get the > GINA24 working under GNU GPL, i paid a small fortune for that hardware > and now you are stabbing me in the back. > > I find it strange that it aint possible to communicate with some > people to get to a solution that opens a market for your business, and > enables YOUR EXISTING CUSTOMERS to use YOUR products, and keep YOUR > brandname high profile. > > A short reply like that, on an issue like this, does not make sence > for a company that works on a global scale, in a market that depends > on innovation. > > On your website you write: "Echo products deliver cutting-edge > solutions for home and studio musicians, the broadcast industry, the > home entertainment market, and various OEM manufacturers. This family > of products leverages the Company's extensive experience in both the > PC market and DSP-based audio technology." > > If this aint an oppertunity to provide a CUTTING EDGE solution then i > don't know what your company is about. > > Sorry for being Dutch and telling my toughts straigh from the heart. > I'm just 99,9% sure that there must be a solution and from a business > point of view that would be a better option then dumping EXISTING > customers. > > In this hectic information society, true communication seems to be > forgotten sometimes... please take a moment to breath, think, and give > it a try. You might gain some new customers or lose atleast one. > Still..., i trust in the communication skills of EchoAudio. > > > Kind regards, > > Mano Stienen. -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * Descarga el CD de Musix: (www.musix.org.ar) (www.pc-musica.com.ar/musix) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

1 0

Problems with 0.49 & devices (Seq=1)
by julien bodd 29 Jun '06

29 Jun '06

> se traba, carajo, no sé cómo se dice! I understand a little Italian..so I understand little little spanish ! :-) So, carajo, se dice locks, it's ok..or you meant traps? :-)..blocks.. Whatever..Ok, I'll try all these..the strace seems a good tip.. Hmm..but..what kernel do you want me to download? With musix there are already 3 !! :-) I start with udev and strace..and tell you what.. See you carajo..(what does carajo mean? something like "man", or "dude", "boy"?) :-) Julien.

2 1

Problems with 0.49 & devices (Seq=2)
by julien bodd 29 Jun '06

29 Jun '06

I wanted to install udev..but : > The following packages have unmet dependencies: > udev: Depends: initscripts (>= 2.85-16) but it is not going to be installed so I tried to install initscripts..and then : > initscripts: Depends: mount (>= 2.11x-1) so, iterate with install mount..: > The following packages will be REMOVED: > mount-aes > The following NEW packages will be installed: > mount > WARNING: The following essential packages will be removed > This should NOT be done unless you know exactly what you are doing! > mount-aes > 0 upgraded, 1 newly installed, 1 to remove and 375 not upgraded. > Need to get 153kB of archives. > After unpacking 20.5kB of additional disk space will be used. > You are about to do something potentially harmful > To continue type in the phrase 'Yes, do as I say!' So, are you sure this is what I have to do? Anyway..I typed the phrase..and it said "Abort"..as if I were typing the phrase wrongly..I tried with and without quotes.. Anyway..still the strace to perform..

2 3

Re: Problems with 0.49 &devices
by julien bodd 28 Jun '06

28 Jun '06

I investigated a little further for the SATA controller.. It says that in general kernel 2.6 does not support it.. I read tips like disabling from BIOS : 1) Apic Mode --> disable 2) SATA --> disable OR tranform SATA/RAID to SATA ONLY.. The first option was available on my BIOS..and so I turn that off.. But for the second..I saw nothing.. I also added to the boot options : noapic, nolapic, acpi-off But, again..Nothing of all that solved the problem... Waouw..imagine the day we'll solve this problem..I'll have learned a lot of things..don't desesperate..it is funny..well..in fact..I want to do music..but ok..I'll be patient..I hope the problem will be solved..:-) >From the boot screen msgs..I have also : "detectecting hardware : open_sock() : No such device" Also, the message "Starting PCMCIA services : no socket found" is still there..although I have the nopcmcia option in grub.. (for the 2 messages above..I see that in common they talk about sockets..) So..where are we? What's next on the check list :-) ?? Bye bye

1 0

Re: [Musix-usuarios] Problems with 0.49 & devices
by julien bodd 28 Jun '06

28 Jun '06

Still no solution Marco.. :-) Look at my fstab file..I almost commented all entries.. /dev/hda3 / reiserfs defaults 0 1 #/dev/hda1 /agnula ext3 defaults,auto 0 2 #/dev/hdb5 /data vfat auto,rw,users,defaults,umask=000 0 0 proc /proc proc defaults 0 0 #/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 #usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 #/dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 #/dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 #/dev/dvd /dvd iso9660 defaults,ro,users,noexec,noauto 0 0 # Added by KNOPPIX #/dev/hda5 /mnt/hda5 auto noauto,users,exec 0 0 # Added by KNOPPIX #/dev/hda6 none swap defaults 0 0 I did not commented neither proc nor sysfs because I thought those were important for the pc to boot correctly..Do you think I have to comment them to ? And juste let /dev/hda3 ? And what if I comment /dev/hda3? The pc will not boot? It is on that partition I have agnula.. So..as you see..after all these disabling..(and rebooting)..nothing works better.. For the other things you told me : > 837 ? 00:00:00 ata/0 > 844 ? 00:00:00 scsi_eh_0 > 845 ? 00:00:00 scsi_eh_1 > As instance, this process are not into my system. Maybe the problem is with scsi HDs, or SATA HDs. > Mmm.... what happens if you just kill them :P I even tried as root..I can't manage to kill them..even with kill - 9. A friend of mine told me that probably the ATA CONTROLLER is the one that shows the scsi interfaces..he says ATA interfaces are often shown as scsi interfaces.. > desc: CMD Technology Inc|Silicon Image SiI 3112 SATARaid Controller > It's really a RAID system? No, it is not a RAID system..it is a SATA controller...raid model.. Huh..I'm confused..although I know about softs..etc..in fact I'm a programmer Marco..so I'm generally ok with what you tell me...(hmm...you can speak to me as not a simple user..)..so..although I'm ok with soft..I know NOTHING abour hardware.. So..SATA..etc..I don't know what it is.. My friend told me..that the motherboard has the SATA controller shown above.. but I don't use it.. So..do you still think it could come from this? If we could in some way disable this controller? Or any new idea? It seems that possibilities are decreasing..we have tried a lot of things ! :-) Hope I don't make you crazy..or loose your time.. Julien. When the system will work..I'll make a song for you :-)

2 1

Re: Problems with 0.49
by julien bodd 28 Jun '06

28 Jun '06

Jorge, I have problems with normal user too..they just suggested me to try as root to see if it worked like this. Marcos, I will now try the boot options, and editing the kded configuration file. May be update kde too. But as you notices, the problem is probably coming from the hardware.. So, here is the file you asked me for : CPU0 0: 1106166 IO-APIC-edge timer 1: 254 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 8: 4 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 10: 0 IO-APIC-edge MPU401 UART 12: 8296 IO-APIC-edge i8042 14: 6880 IO-APIC-edge ide0 15: 22 IO-APIC-edge ide1 16: 463 IO-APIC-level libata, EMU10K1 17: 595 IO-APIC-level ohci_hcd:usb1, eth0 18: 0 IO-APIC-level ohci_hcd:usb2 19: 0 IO-APIC-level ohci1394, ehci_hcd:usb3 NMI: 0 LOC: 1106014 ERR: 0 MIS: 0 _________________________________________ CPUINFO processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 2600+ stepping : 1 cpu MHz : 2087.995 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow ts bogomips : 4181.77 _________________________________________ snd-page-alloc pages : 892928 bytes (218 pages per 4kB) _________________________________________ MEMINFO _________________________________________ Placas de sonido reconocidas por el sistema _________________________________________ cat /proc/asound/cards 0 [Live ]: EMU10K1 - SB Live 5.1 SB Live 5.1 (rev.7, serial:0x80641102) at 0x9000, irq 16 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 cat /proc/isapnp >>/tmp/pcinfo.txt _________________________________________ HWSETUP --- class: OTHER bus: PCI device: (null) driver: rt2500 desc: Unknown vendor|Generic rt2500 device --- class: OTHER bus: PCI device: (null) driver: emu10k1-gp desc: Creative Labs|SB Live! (joystick) --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 AGP --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 PCI Bridge --- class: OTHER bus: PCI device: (null) driver: pata_amd desc: nVidia Corporation|nForce2 IDE --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 External PCI Bridge --- class: OTHER bus: PCI device: (null) driver: i2c-nforce2 desc: nVidia Corporation|nForce2 SMBus (MCP) --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 ISA Bridge --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 Memory Controller 5 --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 Memory Controller 2 --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 Memory Controller 3 --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 Memory Controller 4 --- class: OTHER bus: PCI device: (null) driver: unknown desc: nVidia Corporation|nForce2 Memory Controller 1 --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 ehci_hcd EHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 ohci_hcd OHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 ohci_hcd OHCI Host Controller --- class: OTHER bus: PCI device: (null) driver: nvidia-agp desc: nVidia Corporation|nForce2 AGP (different version?) --- class: NETWORK bus: PCI device: eth driver: 3c59x desc: 3Com Corporation|3C920B-EMB Integrated Fast Ethernet Controller --- class: NETWORK bus: PCI device: eth driver: forcedeth desc: nForce2 Ethernet Controller --- class: MOUSE bus: PSAUX device: psaux driver: msintellips/2 desc: Generic PS/2 Wheel Mouse symlink(/dev/psaux,/dev/mouse) --- class: AUDIO bus: PCI device: (null) driver: emu10k1 desc: SB Live! EMU10000 --- class: CDROM bus: IDE device: hdc driver: ignore desc: CREATIVE CD5230E symlink(/dev/hdc,/dev/cdrom) --- class: CDROM bus: IDE device: hdd driver: ignore desc: TSSTcorpCD/DVDW TS-H552B symlink(/dev/hdd,/dev/cdrom1) --- class: VIDEO bus: PCI device: (null) driver: Card:NVIDIA GeForce 4 (generic) desc: nVidia Corporation|NV25 [GeForce4 Ti 4200] --- class: HD bus: IDE device: hda driver: ignore desc: WDC WD273BA --- class: HD bus: IDE device: hdb driver: ignore desc: Maxtor 6Y080L0 --- class: RAID bus: PCI device: (null) driver: unknown desc: CMD Technology Inc|Silicon Image SiI 3112 SATARaid Controller --- class: USB bus: PCI device: (null) driver: ehci-hcd desc: nVidia Corporation|nForce2 USB Controller --- class: USB bus: PCI device: (null) driver: usb-ohci desc: nVidia Corporation|nForce2 USB Controller --- class: USB bus: PCI device: (null) driver: usb-ohci desc: nVidia Corporation|nForce2 USB Controller --- class: UNKNOWN bus: PCI device: (null) driver: ohci1394 desc: nVidia Corporation|nForce2 FireWire (IEEE 1394) Controller _________________________________________ ESPACIO_USADO_LIBRE Filesystem Size Used Avail Use% Mounted on /dev/hda3 15G 2.1G 13G 14% / /dev/hda1 9.2G 8.7G 77M 100% /agnula /dev/hdb5 77G 62G 16G 81% /data tmpfs 506M 0 506M 0% /dev/shm _________________________________________ Modulos ALSA cargados snd_mpu401 7648 1 snd_mpu401_uart 7296 1 snd_mpu401 snd_emu10k1_synth 6656 0 snd_emux_synth 31616 1 snd_emu10k1_synth snd_seq_virmidi 6912 1 snd_emux_synth snd_seq_midi_emul 5888 1 snd_emux_synth snd_seq_dummy 3844 0 snd_seq_oss 30052 0 snd_seq_midi 8096 0 snd_seq_midi_event 6912 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 45644 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 103588 2 snd_emu10k1_synth snd_rawmidi 22944 4 snd_mpu401_uart,snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_ac97_codec 83360 1 snd_emu10k1 snd_ac97_bus 2304 1 snd_ac97_codec snd_seq_device 8076 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_util_mem 4608 2 snd_emux_synth,snd_emu10k1 snd_hwdep 8836 2 snd_emux_synth,snd_emu10k1 snd_pcm_oss 36512 0 snd_pcm 75656 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_timer 21124 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 9608 2 snd_emu10k1,snd_pcm snd_mixer_oss 16512 3 snd_pcm_oss snd 49024 16 snd_mpu401,snd_mpu401_uart,snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 9312 3 snd _________________________________________ Modulos OSS cargados soundcore 9312 3 snd _________________________________________ ________________VIDEO______________________ ________________Xorg________________________ Section "ServerLayout" Identifier "Xorg Configurado" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse using /dev/input/mice in Kernel 2.6 # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" #otras opciones para layout pueden ser "es" (, teclado latinoamericano estandar Ñ en los :, ' genera acentos...) #"us_intl" (' genera acentos, META+5 ->euro, etc). #us: teclado windoze estandar, WIN_L/R -> Super_L/R (Mod 4). [Alt_L/R -> Alt y Meta]_L/R (Mod 1) Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by KNOPPIX mkxf86config Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 75.0 # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. # Default modes distilled from # "VESA and Industry Standards and Guide for Computer Display Monitor # Timing", version 1.0, revision 0.8, adopted September 17, 1998. # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.41999/11/18 16:52:17 tsi Exp $ # 640x350 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync # 640x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync # 720x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync # 640x480 @ 72Hz (VESA) hsync: 37.9kHz ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync # 640x480 @ 75Hz (VESA) hsync: 37.5kHz ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480 @ 85Hz (VESA) hsync: 43.3kHz ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600 @ 60Hz (VESA) hsync: 37.9kHz ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72Hz (VESA) hsync: 48.1kHz ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 75Hz (VESA) hsync: 46.9kHz ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600 @ 85Hz (VESA) hsync: 53.7kHz ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync # Additional modelines ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync EndSection Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards #Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "vesa" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection _________________________________________ ______________errores de video________________ _________________________________________ Linux julien 2.6.16-beyond4.1 #1 PREEMPT Sun May 28 09:01:14 EEST 2006 i686 GNU/Linux ___________opciones de inicio del kernel:________________ root=/dev/hda3 ro ramdisk_size=100000 lang=us apm=power-off nomce vga=normal Good luck :-) Julien.

1 0