January 2008 - Musix-users - lists.ourproject.org

[Ardour] No puedo grabar ni capturar microfono - linea
by Apocalypse Now 07 Feb '08

07 Feb '08

Hola gente, se que no es un tema nuevo, pero como suelen decir: cada casa es un mundo. Y he aquí que estoy teniendo problemas para grabar. Si bien el título del asunto especifica a Ardour, el tema es más complicado ya que no logro que ingrese la señal de audio de mi instrumento/micrófono. Procedo a detallar el diagrama de conexión: Poseo una mezcladora Behringer Xenyx 802 y una placa de audio Juli@, con el siguiente esquema de conexión: Instrumentos/miscs en LINE's de consola OUT placa de sonido en line 5/6 de consola IN placa de sonido a MAIN OUT de consola CTRL ROOM de consola al amplificador NOTA: Cabe aclarar, que con esta configuración de hard grabo perfectamente con Sonar Cakewalk desde Windows. ------------------------------------------------------------------------------------------------------------ Datos de sofware: Estoy utilizando la distro Ubuntu Gutsy con un kernel compilado para realtime: Linux DaRK 2.6.23.1-rt5.031107 #3 SMP PREEMPT RT Sat Jan 26 03:44:26 ARST 2008 i686 GNU/Linux asound_card: 0 [Juli ]: ICE1724 - ESI Juli@ ESI Juli@ at 0x1180, irq 18 asound_version: Advanced Linux Sound Architecture Driver Version 1.0.15. Compiled on Jan 26 2008 for kernel 2.6.23.1-rt5.031107 (SMP). Interrupts: Código: Seleccionar todo CPU0 CPU1 0: 252 0 IO-APIC-edge timer 1: 2 0 IO-APIC-edge i8042 6: 5 0 IO-APIC-edge floppy 7: 0 0 IO-APIC-edge parport0 8: 7 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 12: 4 0 IO-APIC-edge i8042 14: 20044 0 IO-APIC-edge libata 15: 0 0 IO-APIC-edge libata 16: 0 0 IO-APIC-fasteoi uhci_hcd:usb5 18: 402 0 IO-APIC-fasteoi uhci_hcd:usb4, ICE1724 19: 52784 0 IO-APIC-fasteoi uhci_hcd:usb3, libata 20: 3 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 21: 4622 0 IO-APIC-fasteoi eth0 NMI: 0 0 LOC: 314779 378755 ERR: 0 MIS: 0 lspci: Código: Seleccionar todo 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) 05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 05:02.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) lsmod: Código: Seleccionar todo Module Size Used by ipv6 277860 10 af_packet 25224 2 rfcomm 43800 2 l2cap 26752 11 rfcomm bluetooth 59748 4 rfcomm,l2cap capability 6152 0 commoncap 8704 1 capability ppdev 10628 0 speedstep_lib 6532 0 cpufreq_powersave 2944 0 cpufreq_stats 7744 0 cpufreq_userspace 5540 0 cpufreq_ondemand 9868 0 cpufreq_conservative 8328 0 freq_table 6048 2 cpufreq_stats,cpufreq_ondemand video 19728 0 output 5248 1 video container 6144 0 sbs 20360 0 dock 11948 0 ac 6916 0 battery 13576 0 lp 13636 0 snd_ice1724 77836 1 snd_ice17xx_ak4xxx 5376 1 snd_ice1724 snd_ac97_codec 101156 1 snd_ice1724 ac97_bus 3712 1 snd_ac97_codec snd_ak4114 11008 1 snd_ice1724 snd_pcm_oss 43136 0 snd_mixer_oss 18176 1 snd_pcm_oss snd_pcm 80772 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_pcm_oss snd_page_alloc 11784 1 snd_pcm snd_pt2258 5632 1 snd_ice1724 snd_i2c 6784 2 snd_ice1724,snd_pt2258 snd_ak4xxx_adda 9472 2 snd_ice1724,snd_ice17xx_ak4xxx snd_mpu401_uart 10240 1 snd_ice1724 snd_seq_oss 36352 0 snd_seq_midi 9856 0 snd_rawmidi 26240 2 snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 8832 2 snd_seq_oss,snd_seq_midi snd_seq 55536 8 snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24964 2 snd_pcm,snd_seq snd_seq_device 9868 4 snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 57860 18 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_pt2258,snd_i2c,snd_ak4xxx_adda,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device iTCO_wdt 13780 0 iTCO_vendor_support 5124 1 iTCO_wdt parport_pc 38180 1 psmouse 41232 0 intel_agp 26004 0 serio_raw 8452 0 soundcore 9824 1 snd button 9616 0 parport 38984 3 ppdev,lp,parport_pc pcspkr 4608 0 agpgart 35540 1 intel_agp shpchp 35220 0 pci_hotplug 32800 1 shpchp joydev 11840 0 evdev 11520 4 reiserfs 248960 3 sg 37276 0 sr_mod 18084 0 sd_mod 31232 7 cdrom 37536 1 sr_mod usbhid 31872 0 hid 30848 1 usbhid 8139cp 25216 0 ata_piix 18692 5 8139too 27264 0 mii 6912 2 8139cp,8139too ata_generic 8964 0 libata 125296 2 ata_piix,ata_generic uhci_hcd 26640 0 ehci_hcd 36236 0 usbcore 145288 4 usbhid,uhci_hcd,ehci_hcd floppy 63268 0 scsi_mod 148204 4 sg,sr_mod,sd_mod,libata thermal 16796 0 processor 36168 1 thermal fan 6404 0 fuse 48276 3 La única opción con que puedo arrancar el demonio jackd a través de qjackctl es si le quito la opción RT, caso contrario el demonio arranca y muere en unos segundos. Nota: Ya he probado arrancarlo desde la línea de comandos y sucede lo mismo. Una vez puesto en marcha jackd, inicio Ardour sin inconvenientes, le sumo un track/bus configurándolo con las opciones: software monitoring, Auto input, Autoconnet-input phisical input, Autoconnect-output to master bus y no logro ingresar señal. Lo curioso es que con la misma configuración desde el live-cd de Musix puedo grabar. ¿Alguien tiene alguna sugerencia o prueba que pueda hacer? He leído varios artículos en la red y no puedo dar con la solución. Les agradecería cualquier ayuda. Desde ya gracias Saludos

2 1

Musix 1.0 R3 test5 Live DVD and CD released!!
by Marcos Guglielmetti 30 Jan '08

30 Jan '08

This is our first DVD! http://www.musix.org.ar/wiki/index.php/Musix1.0r3test5-announce Cheers!! -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

1 0

Re: 1.0r3 test 4 probs and suggestions - chibitracker
by Marcos Guglielmetti 21 Jan '08

21 Jan '08

Hola allcoms: | I read Musix is based upon stable, but stable still only has Ardour | 0.99, Rosegarden 1.4 etc and Musix has newer versions (but not the | latest Rosegarden 1.6.x btw). Yes, that's because Carlos Pino builded those packages for us, but for some versions is impossible, for instance, Kdenlive 0.5 could not be builded on Debian Stable because it's dependencies | That is an old Traverso as stable | version 0.42 is out now. I can understand you not wanting to include | cvs versions of KDEnlive or whatever though. I would like to, but I think we just cant do it; Mepis is doing something similar, basing Mepis on Debian and upgrading some packages. making "backports" | > I updated | > http://www.musix.org.ar/wiki/index.php?title=Sugerencias_de_software | | Thanks for doing that! You are welcome, and you are invited to update this and other wiki articles | Out of all those I think xdtv is the most important as it plays an | important role in Linux video- its the only good analogue video (v4l2) | capture program I know of- the only one I found that could capture | DVD-res analogue video with rt preview that WORKED. Its a shame that | its a dead program now as cinelerra and KDEnlive don't do this. Ok, it sound really good; could you register on the wiki and edit this link http://www.musix.org.ar/wiki/index.php?title=Sugerencias_de_software by adding the comment you made above? (sorry about my tired english) | I'll let you know how I go with Test 5 later! Ok, I would suggest the live-dvd by far, but the CD at least now installs on almost any machine, regards | Dan Ah, By the way, it would be better to talk using the mailing list: https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users Cheers -- `&' # Marcos Guglielmetti, co-director de # Musix GNU+Linux, 100% Software Libre para artistas _#_ http://www.musix.org.ar (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix ( === ) Ecología: http://autosus.wordpress.com `---' Personal: http://marcospcmusica.wordpress.com "Sólo un hombre que se sabe libre es capaz de liberarse de la esclavitud" Espartaco http://es.wikiquote.org/wiki/Libertad

1 0

Re: 1.0r3 test 4 probs and suggestions - chibitracker
by Marcos Guglielmetti 21 Jan '08

21 Jan '08

Hola allcoms: | Thanks for the quick reply Marcos! | | > | Firstly, the (kanotix) installer is broke. I installed Musix to an | > | ext3 /dev/hda2 with the kanotix installer but it didn't configure | > | grubs menu.conf properly- the partition (hda2) should've been | > | described as hd(0,1) but Musix set it up as hd(0,0) which resulted in | > | no kernel being found and so no boot. | > | > It was solved: | > http://www.musix.org.ar/wiki/index.php/Musix1.0r3test4-announce#IDE_hds | > | > You have a patch there. Also, we are releasing test5 in a few ours | | Great! :D The live CD is there, now the livd-dvd is going up | > | Secondly, I thought I read that Musix was supposed to auto-mount | > | drives now but I was unable to get it to even register my USB SD card | > | adapter / SD card. | > | > Our 2.6.21 kernel does not has support for this kind of memory cards, | > install the linux-image-2.6.23-rt1 | | Will this patch be included in Test 5s default kernel? Not into the Live-DVD kernel, but yes into the _installed_ Live-DVD system. But, anyway, yo can install linux-image-2.6.23-rt1 anytime, it's easy apt-get update apt-get install linux-image-2.6.23-rt1 Next testing releases (not 1.0 ones) of Musix will have multiluns (that's what makes SD reading possible) enabled | > | Third, seeing as rox is the default desktop, I'd also like to have | > | rox used as the default file manager when I double-click 'Home' or | > | any other file links on the desktop. How do I make rox the default | > | file manager? | > | > Good: I like it too :D | > | > right clic on the icon (i suppose, the Home icon), Edit element, and | > just put ~/ in the first field, and remove the text in the second one | | Cool! I'll try that in a minute. Yes, I'm a fan of rox as it even runs | and opens really fast on machines with 64MB RAM (I know from running | it on xbox and zaurus Linux), maybe even less? Fantastic... I really like it, and I have a duron 1800 , 384 RAM, I prefer rox than xfe or konqueror sometimes, to look for something faster, using markers | > | The last and biggest prob I've had with musix is I've been unable to | > | get internet working after installation although it does work when | > | run off the live CD. netcardconfig doesn't run at all and using the | > | DHCP netcard config option under Musixconfig hasn't worked either. | > | > Thats weird, really... did you tried dhcp with sudo? netcardconfig as | > root? | | Yes. I'll just have to see if I have the same problem under Test 5... maybe yes: I was experimenting ramdom behavior of dhcp... It would be easy for you to modify some startup script and add simple: dhclient If not, as root run: dhclient, or sudo dhclient as normal user. Or add sudo dhclient to ~/Autostart/start.sh echo -n "sudo dhclient&" >> ~/Autostart/start.sh | > | As I've said already, Music is the best 700MB selection of FOSS | > | software I've ever seen but it can still be made even better - fix | > | the above bugs and scrap both Soundtracker and Cheesetracker and | > | replace them with the more powerful, more portable and better looking | > | chibitracker please! | > | | > | http://chibitracker.berlios.de/ | > | > Y will add it to the pending task list, thanks | > | > http://prdownload.berlios.de/chibitracker/chibitracker-1.1.tar.gz | | Great, thanks! | | > | Traverso should also be included on Musix eventually, | > | > it's allready there | | I can't find it on test 4- you mean its in Test 5 CD or on Test 5 DVD? It's installed by default on almost any Musix version, test4 has it too: apt-cache policy traverso traverso: Installed: 0.30.0 Candidate: 0.30.0 Version table: *** 0.30.0 0 500 ftp://musix.ourproject.org ./ Packages 100 /var/lib/dpkg/status You can use the Audio desktop, or (at icewm) press the [Windows key]+ [Space Bar] and type traverso, or open a konsole and type traverso | > | maybe after the | > | next (0.43) release | > | | > | I'm looking forward to future Musix releases - thanks for your help | > | and a great distro! | > | | > | Dan | > | > Thanks, the Live-DVD it's a good project too | | I will - I would hope to see vlc, DeVeDe, xdtv (xawdecode), winff and | maybe even KDEnlive 0.6(cvs) on the DVD- are they included? No, sorry: only VLC and kdenlive, but not this 0.6 version, 0.4 from debian multimedia (anyway, you can upgrade your hole system if you want to but): Musix 1.0 is a very stable system, not a bleeding edge one; I started the migration to debian/testing because of this, just today, to get more up to date software, debian/testing derivated versions will not be out there so soon The 1.0 age is not finished yet for us. Anyway, you can use Cinelerra if kdenlive 0.4 does not fits your needs, or you can use Kino | How about hypermammut, by the author of ZynAddSubFX Paul Nasca- it | converts pictures to sound and vice versa! I listened this name before, I will add it as the other apps you told me. For now: http://www.musix.org.ar/wiki/index.php?title=Musix1.0r3test5-announce "New packages on the Live-DVD: OpenOffice (75 languages), full KDE Desktop (63 languages), dozens of education apps (23 categories), a 75Mb Steinway Piano Soundfont, full printer and scanner support, amarok, scribus, cinelerra, kino, blender, inkscape, Linux Multimedia Studio, democracyplayer, vlc, mplayer, kdenlive, qdvdauthor, mandvd, Clam, Qcad, wengophone, a lot of games, gem, yafray, beryl, compiz, canorus, konversation, qemu, freej, konserve, lives, stellarium, nted, clamav, avscan, development packages, mozilla-firefox-locale (28 languages), manpages (23 languages), Linux 2.6.23-rt1 (when installed) and more!" * Complete package list ordered alphabetically http://www.musix.org.ar/wiki/index.php?title=Live-DVD_packages | http://sourceforge.net/projects/hypermammut | | Nice one Marcos! | | dan Cheers I updated http://www.musix.org.ar/wiki/index.php?title=Sugerencias_de_software -- `&' # Marcos Guglielmetti, co-director de # Musix GNU+Linux, 100% Software Libre para artistas _#_ http://www.musix.org.ar (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix ( === ) Ecología: http://autosus.wordpress.com `---' Personal: http://marcospcmusica.wordpress.com "Nuestras clases dominantes han procurado siempre que los trabajadores no tengan historia, no tengan doctrina, no tengan héroes ni mártires. Cada lucha debe empezar de nuevo, separada de las luchas anteriores: la experiencia colectiva se pierde, las lecciones se olvidan. La historia aparece así como propiedad privada, cuyos dueños son los dueños de todas las otras cosas" (Rodolfo Walsh)

1 0

Re: 1.0r3 test 4 probs and suggestions - chibitracker
by Marcos Guglielmetti 20 Jan '08

20 Jan '08

Hola ! | Hi Marcos! | | I've just had a quick go with the latest Musix and its improved a lot | since I last tried it about 6 months ago. I'd say its got the biggest | and best collection of software I've ever seen fit on 1 cdrom but its | still got a few showstopper bugs sadly :( Dont worry | Firstly, the (kanotix) installer is broke. I installed Musix to an | ext3 /dev/hda2 with the kanotix installer but it didn't configure | grubs menu.conf properly- the partition (hda2) should've been | described as hd(0,1) but Musix set it up as hd(0,0) which resulted in | no kernel being found and so no boot. It was solved: http://www.musix.org.ar/wiki/index.php/Musix1.0r3test4-announce#IDE_hds You have a patch there. Also, we are releasing test5 in a few ours http://www.musix.org.ar/wiki/index.php?title=Musix1.0r3test5-announce it has the patch, od course The problem was related to knoppix and kanotix installer, and to the rebuildfstab | Thankfully I'm a long time Linux | user and so I knew what the problem was and how to fix it but most | newbies would give up there and would be bewildered at the prospect of | fixing it. | | Secondly, I thought I read that Musix was supposed to auto-mount | drives now but I was unable to get it to even register my USB SD card | adapter / SD card. Our 2.6.21 kernel does not has support for this kind of memory cards, install the linux-image-2.6.23-rt1 | Third, seeing as rox is the default desktop, I'd also like to have rox | used as the default file manager when I double-click 'Home' or any | other file links on the desktop. How do I make rox the default file | manager? Good: I like it too :D right clic on the icon (i suppose, the Home icon), Edit element, and just put ~/ in the first field, and remove the text in the second one | | The last and biggest prob I've had with musix is I've been unable to | get internet working after installation although it does work when run | off the live CD. netcardconfig doesn't run at all and using the DHCP | netcard config option under Musixconfig hasn't worked either. Thats weird, really... did you tried dhcp with sudo? netcardconfig as root? | As I've said already, Music is the best 700MB selection of FOSS | software I've ever seen but it can still be made even better - fix the | above bugs and scrap both Soundtracker and Cheesetracker and replace | them with the more powerful, more portable and better looking | chibitracker please! | | http://chibitracker.berlios.de/ Y will add it to the pending task list, thanks http://prdownload.berlios.de/chibitracker/chibitracker-1.1.tar.gz | Traverso should also be included on Musix eventually, it's allready there | maybe after the | next (0.43) release | | I'm looking forward to future Musix releases - thanks for your help | and a great distro! | | Dan Thanks, the Live-DVD it's a good project too -- > Llegará un día en que nuestros hijos, > llenos de vergüenza, recordarán estos > días extraños en los que la honestidad > más simple era calificada de coraje. > Yevtushenko, Yevgeny

1 0

Re: [Musix-users] BEHRINGER U-Control UCA202
by Sean Edwards 10 Jan '08

10 Jan '08

The Short Answer: I think asking a manufacturer to declare their product work with Linux would backfire, and actually lock users of a product into a specific version of a distribution on a specific hardware platform. The Long Answer: In 1978, at the age of 12 (yes I know I am old), I taught myself to program in BASIC. I used to go to the local Radio Shack store on a Saturday afternoon, and type in my programs to watch them run. It was an exciting time! In 1980, my father purchased a Radio Shack Color Computer II, at school, I learned Pascal on an Apple II. I had friends with Timex Sinclair computers, Commodor 64's and Amigas. Other companies like PET and HeathKit, had computer kits that you would assemble yourself. I remember great debates about which computer was better at what task, then the IBM PC arrived, and most everything else died. One can see Linux as the software/operating system version of what went on in the 1980's. Great debates still arise over which distribution is better for what task, and many of my favorite distributions of the past are now gone. The problem with commercial development of software, or device drivers, for Linux is the same as the software development problem in the early computer days: Which platform do we support? I remember I could get "One on One Basketball Larry Bird vs. Magic Johnson" for Color Computer II, Apple II or Commodore 64, but not PET or Heathkit. The problem with developing for Linux is not just which distribution to support, but which hardware platform to support. Debian alone supports 12 hardware platforms! Some companies will support an application or device when used on specific hardware with a specific release of a specific Linux distribution. This is not an evil pracitice, this is about quality control. Some devices do not have open source Linux drivers available because agreements with sub component vendors (firmware for example) prevent them from doing so. In the present day, most computer users use Microsoft Windows. Most multi-media computer users use Apple Macintosh. Linux desktop users, although steadily growing in numbers, are a very very small percentage of all computer users. Linux multi-media users are yet an even smaller percentage. So, when a company like Behringer has USB devices that just happen to work with Linux/Alsa, I think that to be wonderful! I do not know anybody who develops products for Behringer, but Linux/Alsa usability may even be an intentional part of the developement process. But, for Behringer to officially support "Linux", the users of that product may find support limited to a specific distribution and version on a specific hardware platform. It is frustrating when something is not supported in Linux, like my combination USB PC/MIDI keyboard from Creative Labs. Also, just as frustrating is the partial support for devices in Linux, like my Korg microKnotroL keyboard. Instead of asking companies to make "Linux Friendly" devices, or asking them to officially support their devices in Linux, I think it is better to find available devices that do work with Linux and document it. This helps others make better choices and waste less money. I think if officially supporting Linux would help Behringer make more money, they would do it. I say that because Behringer does maintain a list of free software for Windows and Macintos to use with their products: http://www.behringer.com/05_support/u-control-downloads/u-control-downloads… -=Sean Edwards=- ----- Original Message ---- From: Marcos Guglielmetti <marcospcmusica(a)gmail.com> To: musix-users(a)lists.ourproject.org; Lista de usuarios de Musix <musix-usuarios(a)lists.ourproject.org> Cc: Sean Edwards <cybersean3000(a)yahoo.com> Sent: Thursday, January 10, 2008 9:29:45 AM Subject: Re: [Musix-users] BEHRINGER U-Control UCA202 El Jueves, 10 de Enero de 2008 06:06, Sean Edwards escribió: | I am happy to report the BEHRINGER U-Control UCA202 works with Linux/Alsa | | http://www.behringer.com/UCA202/index.cfm?lang= | | Here is the info from proc file system: | | I: Bus=0003 Vendor=08bb Product=2902 Version=0100 | N: Name="Burr-Brown from TI USB Audio CODEC " | P: Phys=usb-0000:00:1d.0-2/input3 | S: Sysfs=/class/input/input9 | U: Uniq= | H: Handlers=kbd event8 | B: EV=3 | B: KEY=e0000 0 0 0 | | -=Sean Edwards=- | One friend from the musix-usuarios (spanish lang) mailing list had a good idea: how about reporting Behringer about this? Maybe then they could add GNU/Linux to the supported OS list, and/or think about supporting GNU/Linux What do you think? Regards | | | | | __________________________________________________________________________ |__________ Looking for last minute shopping deals? | Find them fast with Yahoo! Search. | http://tools.search.yahoo.com/newsearch/category.php?category=shopping | | _______________________________________________ | Musix GNU+Linux - www.musix.org.ar | Musix-users mailing list | Musix-users(a)lists.ourproject.org | https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users -- `&' # Marcos Guglielmetti, co-director de # Musix GNU+Linux, 100% Software Libre para artistas _#_ http://www.musix.org.ar (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix ( === ) Ecología: http://autosus.wordpress.com `---' Personal: http://marcospcmusica.wordpress.com Fry: "Tal vez no lo comprendais, pero al fin he encontrado lo que necesito para ser feliz, y no son amigos. Son cosas." Bender: "Yo soy cosa..." http://es.wikiquote.org/wiki/Futurama ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

BEHRINGER U-Control UCA202
by Sean Edwards 10 Jan '08

10 Jan '08

I am happy to report the BEHRINGER U-Control UCA202 works with Linux/Alsa http://www.behringer.com/UCA202/index.cfm?lang= Here is the info from proc file system: I: Bus=0003 Vendor=08bb Product=2902 Version=0100 N: Name="Burr-Brown from TI USB Audio CODEC " P: Phys=usb-0000:00:1d.0-2/input3 S: Sysfs=/class/input/input9 U: Uniq= H: Handlers=kbd event8 B: EV=3 B: KEY=e0000 0 0 0 -=Sean Edwards=- ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

2 2

Re: [M-Colab] behringer ugc 102 / something to test
by Marcos Guglielmetti 05 Jan '08

05 Jan '08

Hello Sean, ¿Could you try this in your system? There are two attached files: 021_behringer_ucg102.rules should be copied /etc/udev/udev.d and behringer_ucg102 should be copied to /usr/local/bin Then, make it executable chmod +x /usr/local/bin/behringer_ucg102 Gilberto Borges made this, so, when you plug the behringer_ucg102 cable to your PC, it must run the script Could you test it? Regards | | Algun tipo que tiene un cable behringer_ucg102 puede | testear esto? El script, creo que va correr bien. Lo | que más me preocupa son las reglas de UDEV. Creo que | esta todo correcto, pero... | | Quedo mui contento si tuvier reportes. Esto todo | debera hacer parte de musixcontrol y es la primera | tentativa de adaptar musixcontrol a una cuestión de | hardware cerrada en un modelo y fabricante. | | Gracias. | | Gilberto. | | | Abra sua conta no Yahoo! Mail, o único sem limite de espaço para | armazenamento! http://br.mail.yahoo.com/ -- "Alegría es una palabra q no todos sentimos, sólo los que la saben valorar." Qué mersa, loco. Denuncien a esta página por mersa: http://www.frasescelebres.net/

1 0

Re: [Musix-users] BEHRINGER UCG102 (gilberto, mira esto)
by Sean Edwards 02 Jan '08

02 Jan '08

This is the best config I got from this device with my testing so far. The PC is a Dell Latitude D830 Core2 Duo with 2GB RAM. -=cybersean=- ----- Original Message ---- From: Marcos Guglielmetti <marcospcmusica(a)gmail.com> To: Musix GNU+Linux users list <musix-users(a)lists.ourproject.org>; Lista de colaboradores de Musix <musix-colaborad(a)lists.ourproject.org> Sent: Monday, December 31, 2007 11:56:39 PM Subject: Re: [Musix-users] BEHRINGER UCG102 (gilberto, mira esto) 2008/1/1, Sean Edwards <cybersean3000(a)yahoo.com>: > If you need anyting else, let me know. > > -=cybersean3000=- > > > ----- Original Message ---- > > From: Marcos Guglielmetti <marcospcmusica(a)gmail.com> > > To: Musix GNU+Linux users list <musix-users(a)lists.ourproject.org>; Lista de usuarios de Musix <Musix-usuarios(a)lists.ourproject.org> > > > > Fine! > > > Could you send us the jack command? > > > cat ~/.jackdrc > > /usr/bin/jackd -R -p128 -t200 -m -dalsa -r44100 -p64 -n2 -D -Chw:1,0 -Phw:1,0 -S -i1 -o2 -I1 -O1 > > > and > > > cat /proc/bus/usb/devices > > I: Bus=0003 Vendor=08bb Product=2902 Version=0100 > > N: Name="Burr-Brown from TI USB Audio CODEC " > > P: Phys=usb-0000:00:1d.1-2/input3 > > S: Sysfs=/class/input/input10 > > U: Uniq= > > H: Handlers=kbd event6 > > B: EV=3 > > B: KEY=e0000 0 0 0 > > Thanks, just only to know if this is the best config you got out of this sound device: we are trying to make some autodetection script that could launch jackd configured to run with it (and if you want to suggest something, just tell us); regards -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode _______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-users mailing list Musix-users(a)lists.ourproject.org https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

Re: [Musix-users] BEHRINGER UCG102 (gilberto, mira esto)
by Marcos Guglielmetti 01 Jan '08

01 Jan '08

2008/1/1, Sean Edwards <cybersean3000(a)yahoo.com>: > If you need anyting else, let me know. > > -=cybersean3000=- > > > ----- Original Message ---- > > From: Marcos Guglielmetti <marcospcmusica(a)gmail.com> > > To: Musix GNU+Linux users list <musix-users(a)lists.ourproject.org>; Lista de usuarios de Musix <Musix-usuarios(a)lists.ourproject.org> > > > > Fine! > > > Could you send us the jack command? > > > cat ~/.jackdrc > > /usr/bin/jackd -R -p128 -t200 -m -dalsa -r44100 -p64 -n2 -D -Chw:1,0 -Phw:1,0 -S -i1 -o2 -I1 -O1 > > > and > > > cat /proc/bus/usb/devices > > I: Bus=0003 Vendor=08bb Product=2902 Version=0100 > > N: Name="Burr-Brown from TI USB Audio CODEC " > > P: Phys=usb-0000:00:1d.1-2/input3 > > S: Sysfs=/class/input/input10 > > U: Uniq= > > H: Handlers=kbd event6 > > B: EV=3 > > B: KEY=e0000 0 0 0 > > Thanks, just only to know if this is the best config you got out of this sound device: we are trying to make some autodetection script that could launch jackd configured to run with it (and if you want to suggest something, just tell us); regards -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

1 0