[Musix-Help] Hola y problemas

Lourdes Mallorquí i Dani Fossas lourdes.dani en gmail.com
Vie Mar 3 14:48:34 CET 2006 

A Divendres, 3 de Març de 2006 02:35, Marcos Guglielmetti va escriure:
> El Jueves, 2 de Marzo de 2006 23:59, Lourdes Mallorquí i Dani Fossas
>
> escribió:
> >  Sigue paso a paso lo que te comenté, y dime cómo va :-)
> >
> > Lo hice, al parecer se instaló bien.
> > Me pidió que rebooteara y así lo hice. Todo Perfecto.
> > Cuando reinicio con el nuevo kernel se queda colgado cada vez que
> > llamo a alguna aplicación (lo he porbado un par de veces).
>
> Qué raro che: entonces iniciar el entorno gráfico y justo antes de
> iniciar una aplicación cualquiera la PC se cuelga?
>
> Debe haber algo extraño allí
>
> ¿Puedes ayudarnos a saber qué sucede?
>
> Inicia con ese kernel 2.6.15.4, luego abre una terminal gráfica, o una
> consola de texto presionando (control+alt+F2), te logueas como root, y
> escribes
>
> dmesg > /tmp/dmesg.txt
>
> Ok, entonces tendrás ese archivo de texto con mensajes del kernel
> en /tmp
>
> Luego (si quieres iniciar con otro kernel, mejor quizá) adjuntas ese
> archivo creado: /tmp/dmesg.txt a un mail y nos lo envías.

Aquí te lo mando.
>
> > Por otro lado he abierto synaptic con sudo y he añadido el
> > repositorio de musix del servidor k-maleon que se anuncia en el wiki,
> > luego he intentado instalar el kernel y:
> >
> > W: No se puede leer la lista de paquetes fuente
> > http://demudi.agnula.org 1.3.0/main Packages
> > (/var/lib/apt/lists/demudi.agnula.org_packages_demudi_dists_1.3.0_mai
> >n_binary-i386_Packages) - stat (2 No existe el fichero o el
> > directorio)
> > W: No se puede leer la lista de paquetes fuente
> > http://www.k-maleon.com musix/main Packages
> > (/var/lib/apt/lists/www.k-maleon.com_musix_deb_dists_musix_main_binar
> >y-i386_Packages) - stat (2 No existe el fichero o el directorio)
> >
> >
> >
> > No sé ...(?)
>
> Es que seguro no actualizaste la base de datos de software disponible
> con apt-get update o con synaptic
>
> Has una de las dos cosas.

Lo intento, la consola me suelta una parrafada, este es el final:

Ign http://demudi.agnula.org 1.3.0/main Release
Obj http://apt.agnula.org stable/main Packages
Obj http://apt.agnula.org stable/main Release
Des:2 http://ftp.debian.org testing/main Release [81B]
Obj http://ftp.debian.org stable/main Packages
Obj http://ftp.debian.org stable/main Release
Descargados 3796kB en 23s (159kB/s)
Imposible obtener 
http://demudi.agnula.org/packages/custom/dists/custom/main/source/Sources.gz  
404 Not Found
Imposible obtener 
http://demudi.agnula.org/packages/demudi/dists/1.3.0/main/binary-i386/Packages.gz  
404 Not Found
Imposible obtener 
http://www.k-maleon.com/musix/deb/dists/musix/main/binary-i386/Packages.gz  
404 Not Found
Leyendo lista de paquetes... Hecho
W: No se puede leer la lista de paquetes fuente http://demudi.agnula.org 
1.3.0/main Packages 
(/var/lib/apt/lists/demudi.agnula.org_packages_demudi_dists_1.3.0_main_binary-i386_Packages) 
- stat (2 No existe el fichero o el directorio)
W: No se puede leer la lista de paquetes fuente http://demudi.agnula.org 
1.3.0/main Packages 
(/var/lib/apt/lists/demudi.agnula.org_packages_demudi_dists_1.3.0_main_binary-i386_Packages) 
- stat (2 No existe el fichero o el directorio)
W: Tal vez quiera ejecutar 'apt-get update' para corregir estos problemas
E: Algunos archivos de �dice no se han podido descargar, se han ignorado,
o se ha utilizado unos antiguos en su lugar.
root en musix:~#

>
> Si aún falla por algún motivo, podrías bajar paquetes desde k-maleon
> directamente entrando con firefox aquí:
>
> http://www.k-maleon.com/musix/deb/
>
>
>
> Por ejemplo podrías instalar este kernel, con las mismas instrucciones
> que el anterior:
>
> http://www.k-maleon.com/musix/deb/kernel-image-2.6.15.3-rt-musix-2006-11-02
>_2_i386.deb
>
> Sólo que no es necesario ejecutar el script mkinitrd-musix.sh: sólo dpkg
> -i
>
> ¿Se entiende?

Hecho. Me sucede como con el 2.6.13-1-multimedia-386, me da kernel  panic y el 
mensaje:

/sbin/init: 432: cannot open dev/console: No such file
Kernel panic - no sincying: Attempted to kill init!
> 
> Bueno, dinos cómo va.

Así :-(
>
> Disculpa que no tengo mucho tiempo últimamente, pero quiero que podamos
> resolver el problema

No te preocupes, vamos aprendiendo.
------------ próxima parte ------------
IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 1994.893 MHz processor.
Real-Time Preemption Support (C) 2004-2005 Ingo Molnar
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce quiet alsa dma vga=normal 
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 2048 (order: 11, 32768 bytes)
Event source pit installed with caps set: 05
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514936k/524224k available (2602k kernel code, 8900k reserved, 838k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3990.89 BogoMIPS (lpj=1995446)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 19k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb7a0, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4800-0x487f has been reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
PCI: Bridge: 0000:00:0a.0
  IO window: c000-dfff
  MEM window: de000000-dfffffff
  PREFETCH window: 30000000-300fffff
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: dc000000-ddffffff
  PREFETCH window: d0000000-d7ffffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
audit: initializing netlink socket (disabled)
audit(1141392434.342:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 4023, nTxLock = 32184
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 64M @ 0xd8000000
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
sata_sil 0000:01:07.0: version 0.9
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
ata1: SATA max UDMA/100 cmd 0xE0A9E080 ctl 0xE0A9E08A bmdma 0xE0A9E000 irq 16
ata2: SATA max UDMA/100 cmd 0xE0A9E0C0 ctl 0xE0A9E0CA bmdma 0xE0A9E008 irq 16
ata1: no device found (phy stat 00000000)
scsi0 : sata_sil
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata2: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
ata2: dev 0 configured for UDMA/100
scsi1 : sata_sil
  Vendor: ATA       Model: ST3120827AS       Rev: 3.42
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 8, 1179648 bytes)
TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI Shortcut mode
ACPI wakeup devices: 
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI 
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
Time: tsc clocksource has been installed.
VFS: Mounted root (ext2 filesystem).
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
logips2pp: Detected unknown logitech mouse model 85
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 168k freed
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
Adding 1012052k swap on /dev/sda1.  Priority:-1 extents:1 across:1012052k
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
Using specific hotkey driver
ACPI: Thermal Zone [THRM] (40 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 17, io mem 0xe0001000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 18, io mem 0xe0002000
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-2: new low speed USB device using ohci_hcd and address 3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 2-1: new full speed USB device using ohci_hcd and address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7504
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
input: CHESEN USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-2
input: CHESEN USB Keyboard as /class/input/input2
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins en debian.org>
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 19
usbcore: registered new driver yealink
drivers/usb/input/yealink.c: Yealink phone driver:yld-20050816
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[df001000-df0017ff]  Max Packet=[2048]
eth1394: $Rev: 1312 $ Ben Collins <bcollins en debian.org>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:05.0 to 64
eth1: forcedeth.c: subsystem: 01297:a550 bound to 0000:00:05.0
NET: Registered protocol family 17
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00301bb40000b326]
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
  Vendor: USB2.0    Model: CardReader CF RW  Rev: 0.0>
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
lp: driver loaded but no devices found
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 17, io mem 0xe0003000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: removed
usb 1-2: USB disconnect, address 3
usb 2-1: USB disconnect, address 2
usb 3-3: new high speed USB device using ehci_hcd and address 4
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-1: new full speed USB device using ohci_hcd and address 4
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7504
usb 1-2: new low speed USB device using ohci_hcd and address 5
input: CHESEN USB Keyboard as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-2
input: CHESEN USB Keyboard as /class/input/input4
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  Vendor: USB2.0    Model: CardReader CF RW  Rev: 0.0>
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 3:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21
Model 1006 Rev 00000000 Serial 10061102
ts: Compaq touchscreen protocol output
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.

Más información sobre la lista de distribución Musix-Help