[Bdi4emc-help] 4.49 probable pinout problem

Fri Jun 23 02:24:46 CEST 2006

>Par_Port_Number
>1 <------------------ 0x378
>Step_Mx_pin_2to9 <------ BASE
>2 <------------------ second pin parallel 25pin port
>Dir_Mx_pin_2to9
>3 <------------------ third pin ...
>Step_My_pin_2to9
>6 <------------------ sixth
>Dir_My_pin_2to9
>7 <------------------ etc
>Step_Mz_pin_2to9
>4
>Dir_Mz_pin_2to9
>[...]
>Could you please make an example according to my
>setup?

Maybe.  I can't really make any sense of your pinout.

Try QS_PINOUT=0x67452301

Note that EMC won't modulate those enable pins, so if you if you need them 
at particular levels, you'll have to accomplish that through other means.

--
Matt