El día 19/09/07, holborn <[email protected]> escribió:
Realmente necesito que alguien lo pruebe y me diga si funciona .....
ftp://ftp.berlios.de/pub/horgand/horgand-dssi-1.12.tar.gz
El editor es solo una ventana ahora mismo .... o sea no hace nada .... pero vaya con que sonara .... me conformo de momento.
Josep
Lo he probado con rosegarden en dos máquinas que tengo , con Debian Etch y Lenny , en ambos casos rosegarden casca.Cuando desisntalo horgand-dssi vuelve a la normalidad.Te pego el error por si te vale (Etch) : supertux@debian-1:~$ PluginFactory::instance(dssi): creating new DSSIPluginFactory LADSPAPluginFactory::discoverPlugins - discovering plugins; path is [/home/supertux/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi] LADSPAPluginFactory::discoverPlugins - trace is Rosegarden 1.5.1 - AlsaDriver - alsa-lib version 1.0.13 JACK tmpdir identified as [/dev/shm] Enhanced3DNow! detected SSE2 detected KCrash: Application 'rosegarden' crashing... JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 512 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 10 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "alsa_pcm:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "alsa_pcm:playback_2" JackDriver::initialiseAudio - found 12 JACK physical inputs JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to "rosegarden:record in 1 L" JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to "rosegarden:record in 1 R" JackDriver::initialiseAudio - initialised JACK audio subsystem ALSA Client information: 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 655362, cap 99] 16,0 - (TerraTec DMX6Fire, MIDI-Front DMX6fire 0) (DUPLEX) [ctype 2, ptype 589826, cap 127] 16,32 - (TerraTec DMX6Fire, Wavetable DMX6fire 0) (WRITE ONLY) [ctype 2, ptype 589826, cap 74] CREATED OUTPUT PORT 3:out 1 - MIDI external device for device 0 Connecting my port 3 to 16:32 on initialisation done Creating device 0 in Play mode for connection 16:32 Wavetable DMX6fire 0 (write) Default device name for this device is MIDI external device CREATED OUTPUT PORT 4:out 2 - MIDI external device 2 for device 1 Connecting my port 4 to 16:0 on initialisation done Creating device 1 in Play mode for connection 16:0 MIDI-Front DMX6fire 0 (duplex) Default device name for this device is MIDI external device 2 Creating device 2 in Record mode for connection 16:0 MIDI-Front DMX6fire 0 (duplex) Default device name for this device is MIDI hardware input device CREATED OUTPUT PORT 5:out 3 - MIDI output system device for device 3 done Creating device 3 in Play mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device Creating device 4 in Record mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks AlsaDriver::initialiseMidi - initialised MIDI subsystem PD .- Una sugerencia para horgand "standalone" , cuando lo arranco , si tuve seleccionado jack como sistema de sonido y quiero arrancarlo con alsa , necesito primero: - iniciar jack , - iniciar horgand, - cambiar las preferencias , - volver a cerrar horgan y jack - reiniciar horgand, ¿sería posible que horgand se iniciara y que diese el mensaje de error , una vez iniciado, con la opción de configurarlo sobre la marcha? no se si me explico . Gracias por tu estupendo trabajo.