Ahora dice esto , y vuelve a cascar hasta que lo desinstalo. rosegarden JACK tmpdir identified as [/dev/shm] could not attach as client Is that the time!? AudioInstrumentMixer::destroyAllPlugins done AudioInstrumentMixer::~AudioInstrumentMixer AudioInstrumentMixer::removeAllPlugins AudioInstrumentMixer::~AudioInstrumentMixer exiting DataBlockRepository::clear() SoundDriver::~SoundDriver (exiting) AudioPlayQueue::~AudioPlayQueue() Toodle-pip. supertux@debian-1:~$ PluginFactory::instance(dssi): creating new DSSIPluginFactory LADSPAPluginFactory::discoverPlugins - discovering plugins; path is [/home/supertux/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi] LADSPAPluginFactory::discoverPlugins - trace is Rosegarden 1.5.1 - AlsaDriver - alsa-lib version 1.0.13 JACK tmpdir identified as [/dev/shm] Enhanced3DNow! detected SSE2 detected KCrash: Application 'rosegarden' crashing... JackDriver::initialiseAudio - JACK sample rate = 48000Hz, buffer size = 512 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 10 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "alsa_pcm:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "alsa_pcm:playback_2" JackDriver::initialiseAudio - found 12 JACK physical inputs JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to "rosegarden:record in 1 L" JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to "rosegarden:record in 1 R" JackDriver::initialiseAudio - initialised JACK audio subsystem ALSA Client information: 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 655362, cap 99] 16,0 - (TerraTec DMX6Fire, MIDI-Front DMX6fire 0) (DUPLEX) [ctype 2, ptype 589826, cap 127] 16,32 - (TerraTec DMX6Fire, Wavetable DMX6fire 0) (WRITE ONLY) [ctype 2, ptype 589826, cap 74] CREATED OUTPUT PORT 3:out 1 - MIDI external device for device 0 Connecting my port 3 to 16:32 on initialisation done Creating device 0 in Play mode for connection 16:32 Wavetable DMX6fire 0 (write) Default device name for this device is MIDI external device CREATED OUTPUT PORT 4:out 2 - MIDI external device 2 for device 1 Connecting my port 4 to 16:0 on initialisation done Creating device 1 in Play mode for connection 16:0 MIDI-Front DMX6fire 0 (duplex) Default device name for this device is MIDI external device 2 Creating device 2 in Record mode for connection 16:0 MIDI-Front DMX6fire 0 (duplex) Default device name for this device is MIDI hardware input device CREATED OUTPUT PORT 5:out 3 - MIDI output system device for device 3 done Creating device 3 in Play mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device Creating device 4 in Record mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks AlsaDriver::initialiseMidi - initialised MIDI subsystem Is that the time!? AudioInstrumentMixer::destroyAllPlugins done AudioInstrumentMixer::~AudioInstrumentMixer AudioInstrumentMixer::removeAllPlugins AudioInstrumentMixer::~AudioInstrumentMixer exiting DataBlockRepository::clear() SoundDriver::~SoundDriver (exiting) AudioPlayQueue::~AudioPlayQueue() Toodle-pip.

El Viernes, 21 de Septiembre de 2007 02:46, holborn escribió: | On Jueves 20 Septiembre 2007, Carlos Pino wrote: | | | Hola | | > Ahora dice esto , y vuelve a cascar hasta que lo desinstalo. | | Pues .... ni idea de que puede pasar ... aquí funciona ... en debian | aunque tengo el rg compilado del CVS ... y relativamente reciente, no sé | ... voy a ver si lo anuncio por ahí a ver si alguien me echa un cable. | | | Josep. Yo, ni idea, pero lo compilé en Musix (debian/etch derivado), y me sucede lo mismo, estamos usando Rosegarden 1.5.1 apt-cache policy rosegarden rosegarden: Instalados: 1:1.5.1-2 Candidato: 1:1.5.1-2 Tabla de versión: *** 1:1.5.1-2 0 500 ftp://musix.ourproject.org ./ Packages 100 /var/lib/dpkg/status 1:1.4.0-1 0 500 ftp://ftp.fr.debian.org etch/main Packages esto dice: osegarden JACK tmpdir identified as [/dev/shm] could not attach as client marcos@Musix:/mnt/hda1/www/horgand-dssi/horgand-dssi-1.12$ PluginFactory::instance(dssi): creating new DSSIPluginFactory LADSPAPluginFactory::discoverPlugins - discovering plugins; path is [/home/marcos/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi] LADSPAPluginFactory::discoverPlugins - trace is Rosegarden 1.5.1 - AlsaDriver - alsa-lib version 1.0.13 JACK tmpdir identified as [/dev/shm] JackDriver::initialiseAudio - JACK sample rate = 48000Hz, buffer size = 512 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 2 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "alsa_pcm:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "alsa_pcm:playback_2" JackDriver::initialiseAudio - no JACK physical inputs found JackDriver::initialiseAudio - initialised JACK audio subsystem ALSA Client information: 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 655362, cap 99] 16,0 - (SB Live [Unknown], EMU10K1 MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 589826, cap 127] 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 327710, cap 66] 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 327710, cap 66] 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 327710, cap 66] 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 327710, cap 66] CREATED OUTPUT PORT 3:out 1 - MIDI soundcard synth for device 0 KCrash: Application 'rosegarden' crashing... Connecting my port 3 to 17:0 on initialisation done Creating device 0 in Play mode for connection 17:0 Emu10k1 Port 0 (write) Default device name for this device is MIDI soundcard synth CREATED OUTPUT PORT 4:out 2 - MIDI soundcard synth 2 for device 1 Connecting my port 4 to 17:1 on initialisation done Creating device 1 in Play mode for connection 17:1 Emu10k1 Port 1 (write) Default device name for this device is MIDI soundcard synth 2 CREATED OUTPUT PORT 5:out 3 - MIDI soundcard synth 3 for device 2 Connecting my port 5 to 17:2 on initialisation done Creating device 2 in Play mode for connection 17:2 Emu10k1 Port 2 (write) Default device name for this device is MIDI soundcard synth 3 CREATED OUTPUT PORT 6:out 4 - MIDI soundcard synth 4 for device 3 Connecting my port 6 to 17:3 on initialisation done Creating device 3 in Play mode for connection 17:3 Emu10k1 Port 3 (write) Default device name for this device is MIDI soundcard synth 4 CREATED OUTPUT PORT 7:out 5 - MIDI external device for device 4 Connecting my port 7 to 16:0 on initialisation done Creating device 4 in Play mode for connection 16:0 EMU10K1 MPU-401 (UART) (duplex) Default device name for this device is MIDI external device Creating device 5 in Record mode for connection 16:0 EMU10K1 MPU-401 (UART) (duplex) Default device name for this device is MIDI hardware input device CREATED OUTPUT PORT 8:out 6 - MIDI output system device for device 6 done Creating device 6 in Play mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device Creating device 7 in Record mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks AlsaDriver::initialiseMidi - initialised MIDI subsystem --      `&'       #    Marcos Guglielmetti, co-director de                     #   Musix GNU+Linux, 100% Software Libre para artistas            _#_       http://www.musix.org.ar                (#)         / O \    + archivos: ftp://musix.ourproject.org/pub/musix    ( === )   Ecología: http://autosus.wordpress.com         `---'    Personal: http://marcospcmusica.wordpress.com "¡Ya cállate, cállate, cállate que me desespeeeeras!" http://es.wikiquote.org/wiki/El_Chavo_del_Ocho

holborn escribió:

On Viernes 21 Septiembre 2007, Marcos Guglielmetti wrote:

Hola

...

Yo, ni idea, pero lo compilé en Musix (debian/etch derivado), y me sucede lo mismo, estamos usando Rosegarden 1.5.1

Es que no se que puede pasar ... yo lo he probado aquí con rg 1.5.1 en otra maquina en debian sid y funciona ..... y en esta maquina en debian sid con rg del SVN también funciona.

He cambiado alguna cosa para hacerlo algo más estable ... pero dudo que sea por eso, la pregunta es .... podríais probarlo con jack-dssi-host?

Aquí con jack-dssi-host también funciona ... y a dos personas de #lad que yo sepa también les funciona.

Es que no tengo ni idea de que puede pasar ....

Josep

Ahora funciona en Testing . En Etch dice violación de segmento con j-d-h , y rg casca hasta que lo desisntalo. La versión de rg en ambos casos es la 1.5.1 .

El Viernes, 21 de Septiembre de 2007 16:59, holborn escribió: | On Viernes 21 Septiembre 2007, Carlos Pino wrote: | | Hola | | > Ahora funciona en Testing . | > En Etch dice violación de segmento con j-d-h , y rg casca hasta que | > lo desisntalo. La versión de rg en ambos casos es la 1.5.1 . | | ummh ... no quiero abusar .... pero si me enviaras el log que genera | strace igual me ayuda. | | strace -o log jack-dssi-host horgand.so | Hola, A ver si lo hice bien... fui a /mnt/hda1/www/horgand-dssi/horgand-dssi-1.12/src/.libs y ejecuté el strace... adjunto el log. Si lo ejecuto sin el strace, en la consola dice: /mnt/hda1/www/horgand-dssi/horgand-dssi-1.12/src/.libs$ jack-dssi-host horgand.so jack-dssi-host: Warning: DSSI path not set jack-dssi-host: Defaulting to "/usr/local/lib/dssi:/usr/lib/dssi:/home/marcos/.dssi" Violación de segmento (por ahí estoy haciendo algo mal yo mismo.) suerte --      `&'       #    Marcos Guglielmetti, co-director de                     #   Musix GNU+Linux, 100% Software Libre para artistas            _#_       http://www.musix.org.ar                (#)         / O \    + archivos: ftp://musix.ourproject.org/pub/musix    ( === )   Ecología: http://autosus.wordpress.com         `---'    Personal: http://marcospcmusica.wordpress.com "¡Ya cállate, cállate, cállate que me desespeeeeras!" http://es.wikiquote.org/wiki/El_Chavo_del_Ocho

holborn escribió:

Hols ...

...

A ver si lo hice bien... fui a

Lo hiciste perfecto ... :)

...

/mnt/hda1/www/horgand-dssi/horgand-dssi-1.12/src/.libs

y ejecuté el strace... adjunto el log.

Gracias ... ya tengo una idea de que pasa .... ahora solo falta arreglarlo ... y vamos a ver si soy capaz porque el fallo esta en la parte que LADSPA reserva memoria para el plugin, parte esa que da respeto porque ... es como muy de guru ... y ya veo que voy a tener que decirle que lo haga.

Gracias

Josep

------------------------------------------------------------------------

Ahí va el mio execve("/usr/bin/jack-dssi-host", ["jack-dssi-host", "horgand.so"], [/* 26 vars */]) = 0 uname({sys="Linux", node="etch", ...}) = 0 brk(0) = 0x805c000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7ef1000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=48482, ...}) = 0 mmap2(NULL, 48482, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7ee5000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libasound.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\371\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=784004, ...}) = 0 mmap2(NULL, 787028, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e24000 mmap2(0xb7ee0000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xbb) = 0xb7ee0000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/liblo.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300%\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=35328, ...}) = 0 mmap2(NULL, 38340, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e1a000 mmap2(0xb7e23000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xb7e23000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/cmov", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/tls/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/tls/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/tls/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/tls/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/tls/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/lib/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/tls/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/cmov", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse2/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse2", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/cmov", 0xbfec6f90) = -1 ENOENT (No such file or directory) open("/usr/lib/libjack-0.100.0.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=64156, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e19000 mmap2(NULL, 96060, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e01000 mmap2(0xb7e0f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe) = 0xb7e0f000 mmap2(0xb7e11000, 30524, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e11000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`3\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=145136, ...}) = 0 mmap2(NULL, 147584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ddc000 mmap2(0xb7dff000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22) = 0xb7dff000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240H\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=89370, ...}) = 0 mmap2(NULL, 70104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7dca000 mmap2(0xb7dd8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe) = 0xb7dd8000 mmap2(0xb7dda000, 4568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7dda000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\f\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=9592, ...}) = 0 mmap2(NULL, 12404, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7dc6000 mmap2(0xb7dc8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7dc8000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240O\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=1241392, ...}) = 0 mmap2(NULL, 1247388, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7c95000 mmap2(0xb7dbc000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x127) = 0xb7dbc000 mmap2(0xb7dc3000, 10396, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7dc3000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\36\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=30612, ...}) = 0 mmap2(NULL, 33384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7c8c000 mmap2(0xb7c93000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0xb7c93000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7c8b000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7c8a000 mprotect(0xb7dbc000, 20480, PROT_READ) = 0 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7c8a6c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 munmap(0xb7ee5000, 48482) = 0 set_tid_address(0xb7c8a708) = 7206 rt_sigaction(SIGRTMIN, {0xb7dce4c0, [], SA_SIGINFO}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0xb7dce420, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 uname({sys="Linux", node="etch", ...}) = 0 setsid() = 7206 rt_sigprocmask(SIG_BLOCK, [HUP INT QUIT USR1 USR2 PIPE TERM], NULL, 8) = 0 brk(0) = 0x805c000 brk(0x807d000) = 0x807d000 write(2, "\njack-dssi-host: Warning: DSSI p"..., 132) = 132 futex(0xb7dc9070, FUTEX_WAKE, 2147483647) = 0 open("/usr/local/lib/dssi/horgand.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\34"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=35913, ...}) = 0 mmap2(NULL, 80456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7c76000 mmap2(0xb7c7d000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0xb7c7d000 mmap2(0xb7c7e000, 47688, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7c7e000 close(3) = 0 mmap2(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7b75000 brk(0x809f000) = 0x809f000 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++

holborn escribió:

Hola

...

Ahí va el mio

He hecho el truco del almendruco .... please ... vuelve a bajarlo y prueba a ver si funciona aunque... la verdad no estoy muy convencido de ello .. y lo malo del caso es que si no funciona .... tendré que reescribir un montón de código, bueno .... un montón .. casi todo, mal asunto que no se pueda portar fácilmente.

Josep

------------------------------------------------------------------------

En Etch sigue en las mismas , o sea violación de segmento . Ahí va información del equipo y un par de logs por si te sirven. JACK: dpkg -l |grep jack ii dssi-host-jack 0.9.1-2 An example DSSI host ii jackd 0.103.0-6 JACK Audio Connection Kit (server and exampl ii libjack-dev 0.103.0-6 JACK Audio Connection Kit (development files ii libjack0 0.103.0-6 JACK Audio Connection Kit (libraries) ii libjack0.100.0-0 0.103.0-6 JACK Audio Connection Kit (libraries) ii libjack0.100.0-dev 0.103.0-6 JACK Audio Connection Kit (libraries) ii qjackctl 0.2.21-1 User interface for controlling the JACK soun EL kernel , cocinado en casa : Linux etch 2.6.18-rt7-lld-rt #1 SMP PREEMPT Fri Apr 13 14:10:35 CEST 2007 i686 GNU/Linux 1 Gb de Ram. execve("/usr/bin/jack-dssi-host", ["jack-dssi-host", "horgand.so"], [/* 27 vars */]) = 0 uname({sys="Linux", node="etch", ...}) = 0 brk(0) = 0x805c000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f60000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=49853, ...}) = 0 mmap2(NULL, 49853, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f53000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libasound.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\371\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=784004, ...}) = 0 mmap2(NULL, 787028, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e92000 mmap2(0xb7f4e000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xbb) = 0xb7f4e000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/liblo.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300%\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=35328, ...}) = 0 mmap2(NULL, 38340, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e88000 mmap2(0xb7e91000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xb7e91000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/cmov", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/tls/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/tls/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/tls/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/tls/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/tls/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/lib/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/lib/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/tls/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/cmov", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/i686/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/usr/lib/sse2/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse2/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/sse2/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/sse2", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/cmov/libjack-0.100.0.so.0", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/cmov", 0xbfcb9d70) = -1 ENOENT (No such file or directory) open("/usr/lib/libjack-0.100.0.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240?\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=64156, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e87000 mmap2(NULL, 96060, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e6f000 mmap2(0xb7e7d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe) = 0xb7e7d000 mmap2(0xb7e7f000, 30524, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e7f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`3\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=145136, ...}) = 0 mmap2(NULL, 147584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e4a000 mmap2(0xb7e6d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22) = 0xb7e6d000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240H\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=89370, ...}) = 0 mmap2(NULL, 70104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e38000 mmap2(0xb7e46000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe) = 0xb7e46000 mmap2(0xb7e48000, 4568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e48000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\f\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=9592, ...}) = 0 mmap2(NULL, 12404, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e34000 mmap2(0xb7e36000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7e36000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240O\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=1241392, ...}) = 0 mmap2(NULL, 1247388, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7d03000 mmap2(0xb7e2a000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x127) = 0xb7e2a000 mmap2(0xb7e31000, 10396, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7e31000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0000\36\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=30612, ...}) = 0 mmap2(NULL, 33384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7cfa000 mmap2(0xb7d01000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6) = 0xb7d01000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7cf9000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7cf8000 mprotect(0xb7e2a000, 20480, PROT_READ) = 0 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7cf86c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 munmap(0xb7f53000, 49853) = 0 set_tid_address(0xb7cf8708) = 15662 rt_sigaction(SIGRTMIN, {0xb7e3c4c0, [], SA_SIGINFO}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0xb7e3c420, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 uname({sys="Linux", node="etch", ...}) = 0 setsid() = 15662 rt_sigprocmask(SIG_BLOCK, [HUP INT QUIT USR1 USR2 PIPE TERM], NULL, 8) = 0 brk(0) = 0x805c000 brk(0x807d000) = 0x807d000 write(2, "\njack-dssi-host: Warning: DSSI p"..., 132) = 132 futex(0xb7e37070, FUTEX_WAKE, 2147483647) = 0 open("/usr/local/lib/dssi/horgand.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\34"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=35888, ...}) = 0 mmap2(NULL, 80456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ce4000 mmap2(0xb7ceb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7) = 0xb7ceb000 mmap2(0xb7cec000, 47688, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7cec000 close(3) = 0 mmap2(NULL, 1052672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7be3000 brk(0x809e000) = 0x809e000 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2600.174 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5201.71 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2600.174 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5199.42 tar xvzf horgand-dssi-1.12.tar.gz && cd horgand-dssi-1.12 && ./configure && make && su -c "make install" horgand-dssi-1.12/ horgand-dssi-1.12/README horgand-dssi-1.12/configure.in horgand-dssi-1.12/aclocal.m4 horgand-dssi-1.12/Makefile.am horgand-dssi-1.12/Makefile.in horgand-dssi-1.12/config.h.in horgand-dssi-1.12/configure horgand-dssi-1.12/AUTHORS horgand-dssi-1.12/COPYING horgand-dssi-1.12/ChangeLog horgand-dssi-1.12/INSTALL horgand-dssi-1.12/NEWS horgand-dssi-1.12/compile horgand-dssi-1.12/config.guess horgand-dssi-1.12/config.sub horgand-dssi-1.12/depcomp horgand-dssi-1.12/install-sh horgand-dssi-1.12/ltmain.sh horgand-dssi-1.12/missing horgand-dssi-1.12/mkinstalldirs horgand-dssi-1.12/src/ horgand-dssi-1.12/src/Makefile.am horgand-dssi-1.12/src/Makefile.in horgand-dssi-1.12/src/horgand.c horgand-dssi-1.12/src/organ.c horgand-dssi-1.12/src/organDSPEffects.c horgand-dssi-1.12/src/organvarios.c horgand-dssi-1.12/src/organFileIO.c horgand-dssi-1.12/src/Holrgan.h horgand-dssi-1.12/data/ horgand-dssi-1.12/data/Makefile.am horgand-dssi-1.12/data/Makefile.in horgand-dssi-1.12/data/Default.horeb checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 32768 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for main in -lm... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking ladspa.h usability... yes checking ladspa.h presence... yes checking for ladspa.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether closedir returns void... no checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for bzero... yes checking for memset... yes checking for pow... yes checking for strstr... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for MODULE... yes configure: creating ./config.status config.status: creating Makefile config.status: creating data/Makefile config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands make all-recursive make[1]: se ingresa al directorio `/tmp/horgand-dssi-1.12' Making all in src make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12/src' if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT horgand.lo -MD -MP -MF ".deps/horgand.Tpo" -c -o horgand.lo horgand.c; \ then mv -f ".deps/horgand.Tpo" ".deps/horgand.Plo"; else rm -f ".deps/horgand.Tpo"; exit 1; fi libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT horgand.lo -MD -MP -MF .deps/horgand.Tpo -c horgand.c -fPIC -DPIC -o .libs/horgand.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT horgand.lo -MD -MP -MF .deps/horgand.Tpo -c horgand.c -o horgand.o >/dev/null 2>&1 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organ.lo -MD -MP -MF ".deps/organ.Tpo" -c -o organ.lo organ.c; \ then mv -f ".deps/organ.Tpo" ".deps/organ.Plo"; else rm -f ".deps/organ.Tpo"; exit 1; fi libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organ.lo -MD -MP -MF .deps/organ.Tpo -c organ.c -fPIC -DPIC -o .libs/organ.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organ.lo -MD -MP -MF .deps/organ.Tpo -c organ.c -o organ.o >/dev/null 2>&1 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organDSPEffects.lo -MD -MP -MF ".deps/organDSPEffects.Tpo" -c -o organDSPEffects.lo organDSPEffects.c; \ then mv -f ".deps/organDSPEffects.Tpo" ".deps/organDSPEffects.Plo"; else rm -f ".deps/organDSPEffects.Tpo"; exit 1; filibtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organDSPEffects.lo -MD -MP -MF .deps/organDSPEffects.Tpo -c organDSPEffects.c -fPIC -DPIC -o .libs/organDSPEffects.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organDSPEffects.lo -MD -MP -MF .deps/organDSPEffects.Tpo -c organDSPEffects.c -o organDSPEffects.o

/dev/null 2>&1 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organvarios.lo -MD -MP -MF ".deps/organvarios.Tpo" -c -o organvarios.lo organvarios.c; \ then mv -f ".deps/organvarios.Tpo" ".deps/organvarios.Plo"; else rm -f ".deps/organvarios.Tpo"; exit 1; fi libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organvarios.lo -MD -MP -MF .deps/organvarios.Tpo -c organvarios.c -fPIC -DPIC -o .libs/organvarios.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organvarios.lo -MD -MP -MF .deps/organvarios.Tpo -c organvarios.c -o organvarios.o >/dev/null 2>&1 if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organFileIO.lo -MD -MP -MF ".deps/organFileIO.Tpo" -c -o organFileIO.lo organFileIO.c; \ then mv -f ".deps/organFileIO.Tpo" ".deps/organFileIO.Plo"; else rm -f ".deps/organFileIO.Tpo"; exit 1; fi libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organFileIO.lo -MD -MP -MF .deps/organFileIO.Tpo -c organFileIO.c -fPIC -DPIC -o .libs/organFileIO.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I. -I.. -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -MT organFileIO.lo -MD -MP -MF .deps/organFileIO.Tpo -c organFileIO.c -o organFileIO.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CC --mode=link gcc -O3 -combine -ffast-math -ffunction-sections -fomit-frame-pointer -msse -Wall -o horgand.la -rpath /usr/local/lib/dssi -module -avoid-version -Wc,-nostartfiles horgand.lo organ.lo organDSPEffects.lo organvarios.lo organFileIO.lo -lm -lm libtool: link: gcc -shared .libs/horgand.o .libs/organ.o .libs/organDSPEffects.o .libs/organvarios.o .libs/organFileIO.o -lm -msse -nostartfiles -Wl,-soname -Wl,horgand.so -o .libs/horgand.so libtool: link: ar cru .libs/horgand.a horgand.o organ.o organDSPEffects.o organvarios.o organFileIO.o libtool: link: ranlib .libs/horgand.a libtool: link: creating horgand.la libtool: link: ( cd ".libs" && rm -f "horgand.la" && ln -s "../horgand.la" "horgand.la" ) make[2]: se sale del directorio `/tmp/horgand-dssi-1.12/src' Making all in data make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12/data' make[2]: No se hace nada para `all'. make[2]: se sale del directorio `/tmp/horgand-dssi-1.12/data' make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12' make[2]: No se hace nada para `all-am'. make[2]: se sale del directorio `/tmp/horgand-dssi-1.12' make[1]: se sale del directorio `/tmp/horgand-dssi-1.12' Password: Making install in src make[1]: se ingresa al directorio `/tmp/horgand-dssi-1.12/src' make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12/src' make[2]: No se hace nada para `install-exec-am'. test -z "/usr/local/lib/dssi" || mkdir -p -- "/usr/local/lib/dssi" /bin/sh ../libtool --mode=install /usr/bin/install -c 'horgand.la' '/usr/local/lib/dssi/horgand.la' libtool: install: /usr/bin/install -c .libs/horgand.so /usr/local/lib/dssi/horgand.so libtool: install: /usr/bin/install -c .libs/horgand.lai /usr/local/lib/dssi/horgand.la libtool: install: /usr/bin/install -c .libs/horgand.a /usr/local/lib/dssi/horgand.a libtool: install: chmod 644 /usr/local/lib/dssi/horgand.a libtool: install: ranlib /usr/local/lib/dssi/horgand.a libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/sbin" ldconfig -n /usr/local/lib/dssi

Libraries have been installed in: /usr/local/lib/dssi If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[2]: se sale del directorio `/tmp/horgand-dssi-1.12/src' make[1]: se sale del directorio `/tmp/horgand-dssi-1.12/src' Making install in data make[1]: se ingresa al directorio `/tmp/horgand-dssi-1.12/data' make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12/data' make[2]: No se hace nada para `install-exec-am'. test -z "/usr/local/share/horgand-dssi" || mkdir -p -- "/usr/local/share/horgand-dssi" /usr/bin/install -c -m 644 'Default.horeb' '/usr/local/share/horgand-dssi/Default.horeb' make[2]: se sale del directorio `/tmp/horgand-dssi-1.12/data' make[1]: se sale del directorio `/tmp/horgand-dssi-1.12/data' make[1]: se ingresa al directorio `/tmp/horgand-dssi-1.12' make[2]: se ingresa al directorio `/tmp/horgand-dssi-1.12' make[2]: No se hace nada para `install-exec-am'. make[2]: No se hace nada para `install-data-am'. make[2]: se sale del directorio `/tmp/horgand-dssi-1.12' make[1]: se sale del directorio `/tmp/horgand-dssi-1.12'