Saludos a todo el foro.
Marcos los resultados de dmesg. mensajes.txt es el de la versión
instalada y mensajes2.txt es el da la live. Lo mismo con los ficheros
pcinfo.
Sobre los ficheros "mensajes", te diré que no aparecen todos los
mensajes que aparecen en la pantalla y es muy difícil seguirlos y
acordarse con detalle de lo que pone. ¿hay alguna manera de hacer que
los mensajes se vayan desplegando de uno en uno sin pasar al siguiente
hasta que se permita desde el teclado? Algo que yo no veo ahora en los
mensajes es un aviso de error fatal al principio y que se refiere a una
orden modprobe sobre algo relacionado con el sonido. Casi al final es
cuando aparece toda una serie de errores.
Sobre la información que aparece en los pcinfo, me llama la atención
que no estén cargados los módulos de MIDI.
Advertirte que soy un absoluto novato en esto de linux. en el
ordenador tengo también cargados windows xp y Suse 10.
He grabado, tal y como tú proponías, la imagen a 12x y el resultado
ha sido el mismo.
Respecto a tu pregunta sobre si funciona el audio y si carga los
programas, te diré que sí. Al entrar en el escritorio de misix, se
escucha la música, también se escucha el fichero de música con el que se
hace la prueba en la live, también puedo escuchar los ficheros mp3 que
tengo en el disco duro. los programas de música se cargan y, por ejemplo
con solfege, puedo oír intervalos, pero no acordes, apareciéndome en
este caso un aviso de error. El Jack sí puedo ponerlo en funcionamiento,
Rosegarden carga bien pero no puedo escuchar nada. "veo" que la cosa
funciona pero no "oigo" y el programa marca que no tengo conexión MIDI.
Con XMMS no puedo entrar en los CDs, y con (creo) KsCD veo que el CD
funciona, pero no oigo nada. También he de hacer notar aquí que no sé
cómo funcionan ni cómo configurar estos programas, así que no sé hasta
qué punto te resaltarán útiles estas informaciones.
Si necesitas mas información no dudes en pedírmela. Sin más de momento.
Patxi
Linux version 2.6.13-1-multimedia-386 (root@localhost) (gcc version 4.0.1 (Debian 4.0.1-2)) #1 Sun Sep 11 17:26:59 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 KT600 ) @ 0x000f77a0
ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3000
ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040
ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef7c00
ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000)
Real-Time Preemption Support (C) 2004-2005 Ingo Molnar
Built 1 zonelists
Kernel command line: root=/dev/hda5 vga=normal ro dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce quiet alsa dma
Initializing CPU#0
WARNING: experimental RCU implementation.
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2230.932 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903192k/917504k available (1419k kernel code, 13924k reserved, 690k data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4467.38 BogoMIPS (lpj=8934776)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: setting ELCR to 0200 (from 0e28)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 3396k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: e8000000-e80fffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x5000-0x500f has been reserved
Initializing Cryptographic API
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ttyS1 at I/O 0xa400 (irq = 3) is a 16550A
ttyS2 at I/O 0xa800 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
TCP bic registered
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3396KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 140k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: ST3120022A, ATA DISK drive
hdb: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
VFS: Can't find ext3 filesystem on dev hda5.
VFS: Can't find an ext2 filesystem on dev hda5.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda5.
Unable to identify CD-ROM format.
NTFS driver 2.1.23 [Flags: R/O MODULE].
Unable to load NLS charset cp437
NTFS-fs error (device hda5): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hda5): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda5): ntfs_fill_super(): Not an NTFS volume.
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
Real Time Clock Driver v1.12
Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (52 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 10, io base 0x0000dc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e400
usb 2-1: new full speed USB device using uhci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 11, io base 0x0000e800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ieee1394: Initialized config rom entry `ip1394'
Generic RTC Driver v1.07
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xe8110000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
eth0: VIA Rhine II at 0x1ec00, 00:50:8d:59:80:f2, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
SCSI subsystem initialized
libata version 1.12 loaded.
sata_via version 1.1
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
sata_via(0000:00:0f.0): routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 11
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
NET: Registered protocol family 17
NTFS-fs error (device hda1): parse_options(): Invalid uid option argument: knoppix
FAT: Unrecognized mount option "uid=knoppix" or missing value
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
lp0: using parport0 (interrupt-driven).
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Model 1006 Rev 00000000 Serial 10061102
ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 3, io mem 0xe8112000
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using uhci_hcd and address 3
input: PC Speaker
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 3860 using kernel context 0
-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5d00
On node 0 totalpages: 261872
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32496 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 KT600 ) @ 0x000f77a0
ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3000
ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040
ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef7c00
ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000)
Built 1 zonelists
Kernel command line: dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off vga=normal initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix alsa BOOT_IMAGE=linux
__iounmap: bad address c00fffd9
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2232.043 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032300k/1047488k available (1846k kernel code, 14528k reserved, 943k data, 292k init, 129984k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4407.29 BogoMIPS (lpj=2203648)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: AMD Athlon(tm) XP 3200+ stepping 00
per-CPU timeslice cutoff: 1462.39 usecs.
task migration cache decay timeout: 2 msecs.
Total of 1 processors activated (4407.29 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1092k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas(a)hp.com
** so I can fix the driver.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x5000-0x500f has been reserved
audit: initializing netlink socket (disabled)
audit(1134992913.205:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 11, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: ST3120022A, ATA DISK drive
hdb: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
libata version 1.10 loaded.
sata_via version 1.1
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 20
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 20
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 21, pci mem 0xe8112000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0xdc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0xe000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0xe400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: irq 21, io base 0xe800
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ub: sizeof ub_scsi_cmd 64 ub_dev 2504
usbcore: registered new driver ub
Initializing USB Mass Storage driver...
usb 3-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins(a)debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev hda.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 28042 blocks, 65536 bytes/block, largest block is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $
Freeing unused kernel memory: 292k freed
Generic RTC Driver v1.07
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (53 C)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI parallel port detected: 9710:9835, I/O at 0xac00(0xb000)
parport1: PC-style at 0xac00 (0xb000) [PCSPP,TRISTATE]
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 19, latency: 32, mmio: 0xe8110000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 940M
agpgart: AGP aperture is 128M @ 0xe0000000
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xe8113000, 00:50:8d:59:80:f2, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
lp0: using parport0 (interrupt-driven).
lp0: console ready
lp1: using parport1 (polling).
apm: BIOS not found.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
Model 1006 Rev 00000000 Serial 10061102
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:00:0c.1[A] -> GSI 19 (level, low) -> IRQ 19
bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 19, latency: 32, memory: 0xe8111000
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ts: Compaq touchscreen protocol output
CPU0
0: 245167 XT-PIC [.........N/ 0] timer
1: 116 XT-PIC [........../ 0] i8042
2: 0 XT-PIC [.........N/ 0] cascade
3: 2 XT-PIC [........../ 0] ehci_hcd:usb5
7: 1 XT-PIC [........../ 0] parport0
8: 1 XT-PIC [........../ 0] rtc
9: 0 XT-PIC [........../ 0] acpi
10: 1029 XT-PIC [........../ 0] uhci_hcd:usb1, uhci_hcd:usb2, eth0, snd_ca0106
11: 3 XT-PIC [........../ 0] uhci_hcd:usb3, uhci_hcd:usb4, bttv0, libata
12: 39473 XT-PIC [........../ 0] i8042
14: 9409 XT-PIC [........../ 0] ide0
15: 45 XT-PIC [........../ 0] ide1
NMI: 0
ERR: 0
_________________________________________
CPUINFO
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) XP 3200+
stepping : 0
cpu MHz : 2230.932
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4467.38
_________________________________________
snd-page-alloc
pages : 528384 bytes (129 pages per 4kB)
_________________________________________
MEMINFO
_________________________________________
______Placas de sonido reconocidas__________
___________por el sistema__________________
_________________________________________
cat /proc/asound/cards
0 [CA0106 ]: CA0106 - CA0106
Live! 7.1 24bit [SB0410] at 0xa000 irq 10
_________________________________________
HWSETUP
---
class: OTHER
bus: PCI
device: (null)
driver: i2c-viapro
desc: Unknown vendor|Generic i2c-viapro device
---
class: OTHER
bus: PCI
device: (null)
driver: via82cxxx
desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
---
class: OTHER
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: VIA Technologies|VT8237 PCI Bridge
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Canon, Inc. CanoScan N1240U/LiDE 30
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.13-1-multimedia-386 ehci_hcd VIA Technologies, Inc. USB 2.0
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: VIA Technologies|VT8377 [KT400 AGP] Host Bridge
---
class: NETWORK
bus: PCI
device: eth
driver: via-rhine
desc: VIA Technologies|VT82C100A [Rhine 10/100]
write config(/etc/sysconfig/netcard)
update config(/etc/sysconfig/knoppix)
---
class: MOUSE
bus: PSAUX
device: psaux
driver: msintellips/2
desc: Generic PS/2 Wheel Mouse
write config(/etc/sysconfig/mouse)
update config(/etc/sysconfig/knoppix)
symlink(/dev/psaux,/dev/mouse)
---
class: AUDIO
bus: PCI
device: (null)
driver: snd-ca0106
desc: Unknown vendor|Generic snd-ca0106 device
write config(/etc/sysconfig/sound)
update config(/etc/sysconfig/knoppix)
---
class: CDROM
bus: IDE
device: hdb
driver: ignore
desc: TOSHIBA ODD-DVD SD-M1802
symlink(/dev/hdb,/dev/cdrom)
---
class: CDROM
bus: IDE
device: hdd
driver: ignore
desc: LITE-ON LTR-52327S
symlink(/dev/hdd,/dev/cdrom1)
---
class: MODEM
bus: PCI
device: (null)
driver: unknown
desc: Rockwell International|HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem
---
class: MODEM
bus: PCI
device: ttyS1
driver: parport_serial
desc: NetMos Technology|222N-2 I/O Card (2S+1P)
symlink(/dev/ttyS1,/dev/modem1)
---
class: VIDEO
bus: PCI
device: (null)
driver: Card:ATI Radeon 9200SE
desc: ATI|Radeon 9200SE
write config(/etc/sysconfig/xserver)
update config(/etc/sysconfig/knoppix)
---
class: VIDEO
bus: PCI
device: (null)
driver: Card:ATI Radeon 9200SE
desc: ATI|Radeon 9200SE
write config(/etc/sysconfig/xserver)
update config(/etc/sysconfig/knoppix)
---
class: FLOPPY
bus: UNKNOWN
device: fd0
driver: unknown
desc: 3.5" 1.44MB floppy drive
write config(/etc/sysconfig/floppy)
update config(/etc/sysconfig/knoppix)
---
class: HD
bus: IDE
device: hda
driver: ignore
desc: ST3120022A
---
class: RAID
bus: PCI
device: (null)
driver: sata_via
desc: Unknown vendor|Generic sata_via device
---
class: CAPTURE
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: USB
bus: PCI
device: (null)
driver: ehci-hcd
desc: VIA Technologies|USB 2.0
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
_________________________________________
ESPACIO_USADO_LIBRE
S.ficheros Tamaño Usado Disp Uso% Montado en
/dev/hda5 26G 1,8G 24G 7% /
tmpfs 443M 0 443M 0% /dev/shm
/dev/hda1 35G 18G 17G 52% /mnt/hda1
/dev/hda3 26G 17G 8,7G 66% /mnt/hda3
/dev/hda6 27G 20G 7,4G 73% /mnt/hda6
_________________________________________
Modulos ALSA cargados
snd_ca0106 27812 0
snd_ac97_codec 76924 1 snd_ca0106
snd_pcm_oss 50976 0
snd_mixer_oss 17280 1 snd_pcm_oss
snd_pcm 86660 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_timer 24068 1 snd_pcm
snd 52068 6 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9952 1 snd
snd_page_alloc 9476 2 snd_ca0106,snd_pcm
_________________________________________
Modulos OSS cargados
soundcore 9952 1 snd
_________________________________________
Linux Musika 2.6.13-1-multimedia-386 #1 Sun Sep 11 17:26:59 CEST 2005 i686 GNU/Linux
CPU0
0: 604691 IO-APIC-edge timer
1: 94 IO-APIC-edge i8042
7: 2 IO-APIC-edge parport0
9: 0 IO-APIC-level acpi
12: 33358 IO-APIC-edge i8042
14: 7375 IO-APIC-edge ide0
15: 69 IO-APIC-edge ide1
16: 39591 IO-APIC-level radeon@PCI:1:0:0, snd_ca0106
19: 3 IO-APIC-level bttv0, bt878
20: 0 IO-APIC-level libata
21: 59 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd
23: 146 IO-APIC-level eth0
NMI: 0
LOC: 604649
ERR: 0
MIS: 0
_________________________________________
CPUINFO
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) XP 3200+
stepping : 0
cpu MHz : 2232.043
cache size : 512 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow
bogomips : 4407.29
_________________________________________
snd-page-alloc
pages : 528384 bytes (129 pages per 4kB)
_________________________________________
MEMINFO
_________________________________________
______Placas de sonido reconocidas__________
___________por el sistema__________________
_________________________________________
cat /proc/asound/cards
0 [CA0106 ]: CA0106 - CA0106
Live! 7.1 24bit [SB0410] at 0xa000 irq 16
_________________________________________
HWSETUP
---
class: OTHER
bus: PCI
device: (null)
driver: i2c-viapro
desc: Unknown vendor|Generic i2c-viapro device
---
class: OTHER
bus: PCI
device: (null)
driver: ignore
desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
---
class: OTHER
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: OTHER
bus: PCI
device: (null)
driver: via-agp
desc: VIA Technologies|VT8237 PCI Bridge
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Canon, Inc. CanoScan N1240U/LiDE 30
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.11 ehci_hcd VIA Technologies, Inc. USB 2.0
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
---
class: OTHER
bus: PCI
device: (null)
driver: via-agp
desc: VIA Technologies|VT8377 [KT400 AGP] Host Bridge
---
class: NETWORK
bus: PCI
device: eth
driver: via-rhine
desc: VIA Technologies|VT82C100A [Rhine 10/100]
write config(/etc/sysconfig/netcard)
update config(/etc/sysconfig/knoppix)
---
class: MOUSE
bus: PSAUX
device: psaux
driver: msintellips/2
desc: Generic PS/2 Wheel Mouse
write config(/etc/sysconfig/mouse)
update config(/etc/sysconfig/knoppix)
symlink(/dev/psaux,/dev/mouse)
---
class: AUDIO
bus: PCI
device: (null)
driver: snd-ca0106
desc: Unknown vendor|Generic snd-ca0106 device
write config(/etc/sysconfig/sound)
update config(/etc/sysconfig/knoppix)
---
class: CDROM
bus: IDE
device: hdb
driver: ignore
desc: TOSHIBA ODD-DVD SD-M1802
symlink(/dev/hdb,/dev/cdrom)
---
class: CDROM
bus: IDE
device: hdd
driver: ignore
desc: LITE-ON LTR-52327S
symlink(/dev/hdd,/dev/cdrom1)
---
class: MODEM
bus: PCI
device: (null)
driver: unknown
desc: Rockwell International|HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem
---
class: MODEM
bus: PCI
device: (null)
driver: parport_serial
desc: NetMos Technology|222N-2 I/O Card (2S+1P)
---
class: VIDEO
bus: PCI
device: (null)
driver: Card:ATI Radeon 9200SE
desc: ATI|Radeon 9200SE
write config(/etc/sysconfig/xserver)
update config(/etc/sysconfig/knoppix)
---
class: VIDEO
bus: PCI
device: (null)
driver: Card:ATI Radeon 9200SE
desc: ATI|Radeon 9200SE
write config(/etc/sysconfig/xserver)
update config(/etc/sysconfig/knoppix)
---
class: FLOPPY
bus: UNKNOWN
device: fd0
driver: unknown
desc: 3.5" 1.44MB floppy drive
write config(/etc/sysconfig/floppy)
update config(/etc/sysconfig/knoppix)
---
class: HD
bus: IDE
device: hda
driver: ignore
desc: ST3120022A
---
class: RAID
bus: PCI
device: (null)
driver: unknown
desc: VIA Technologies|unknown device 1106:3149
---
class: CAPTURE
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: USB
bus: PCI
device: (null)
driver: ehci-hcd
desc: VIA Technologies|USB 2.0
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
_________________________________________
ESPACIO_USADO_LIBRE
S.ficheros Tamaño Usado Disp Uso% Montado en
/dev/root 3,4M 16K 3,4M 1% /
/dev/hdb 700M 700M 0 100% /cdrom
/dev/cloop 1,8G 1,8G 0 100% /KNOPPIX
/ramdisk 796M 4,5M 791M 1% /ramdisk
/UNIONFS 2,5G 1,8G 791M 69% /UNIONFS
/dev/hda1 35G 18G 17G 52% /mnt/hda1
/dev/hda3 26G 17G 8,7G 66% /mnt/hda3
/dev/hda5 26G 1,8G 24G 7% /mnt/hda5
/dev/hda6 27G 20G 7,4G 73% /mnt/hda6
_________________________________________
Modulos ALSA cargados
snd_ca0106 27172 0
snd_ac97_codec 68216 1 snd_ca0106
snd_pcm_oss 47904 0
snd_pcm 77828 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_timer 23684 1 snd_pcm
snd_page_alloc 11268 2 snd_ca0106,snd_pcm
snd_mixer_oss 18688 1 snd_pcm_oss
snd 46308 6 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 11104 1 snd
_________________________________________
Modulos OSS cargados
soundcore 11104 1 snd
_________________________________________
Linux Musix 2.6.11 #3 SMP Mon May 2 00:19:56 CEST 2005 i686 GNU/Linux
