Saludos a todo el foro. Marcos los resultados de dmesg. mensajes.txt es el de la versión instalada y mensajes2.txt es el da la live. Lo mismo con los ficheros pcinfo. Sobre los ficheros "mensajes", te diré que no aparecen todos los mensajes que aparecen en la pantalla y es muy difícil seguirlos y acordarse con detalle de lo que pone. ¿hay alguna manera de hacer que los mensajes se vayan desplegando de uno en uno sin pasar al siguiente hasta que se permita desde el teclado? Algo que yo no veo ahora en los mensajes es un aviso de error fatal al principio y que se refiere a una orden modprobe sobre algo relacionado con el sonido. Casi al final es cuando aparece toda una serie de errores. Sobre la información que aparece en los pcinfo, me llama la atención que no estén cargados los módulos de MIDI. Advertirte que soy un absoluto novato en esto de linux. en el ordenador tengo también cargados windows xp y Suse 10. He grabado, tal y como tú proponías, la imagen a 12x y el resultado ha sido el mismo. Respecto a tu pregunta sobre si funciona el audio y si carga los programas, te diré que sí. Al entrar en el escritorio de misix, se escucha la música, también se escucha el fichero de música con el que se hace la prueba en la live, también puedo escuchar los ficheros mp3 que tengo en el disco duro. los programas de música se cargan y, por ejemplo con solfege, puedo oír intervalos, pero no acordes, apareciéndome en este caso un aviso de error. El Jack sí puedo ponerlo en funcionamiento, Rosegarden carga bien pero no puedo escuchar nada. "veo" que la cosa funciona pero no "oigo" y el programa marca que no tengo conexión MIDI. Con XMMS no puedo entrar en los CDs, y con (creo) KsCD veo que el CD funciona, pero no oigo nada. También he de hacer notar aquí que no sé cómo funcionan ni cómo configurar estos programas, así que no sé hasta qué punto te resaltarán útiles estas informaciones. Si necesitas mas información no dudes en pedírmela. Sin más de momento. Patxi Linux version 2.6.13-1-multimedia-386 (root@localhost) (gcc version 4.0.1 (Debian 4.0.1-2)) #1 Sun Sep 11 17:26:59 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 KT600 ) @ 0x000f77a0 ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3000 ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040 ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef7c00 ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000) Real-Time Preemption Support (C) 2004-2005 Ingo Molnar Built 1 zonelists Kernel command line: root=/dev/hda5 vga=normal ro dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce quiet alsa dma Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2230.932 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 903192k/917504k available (1419k kernel code, 13924k reserved, 690k data, 140k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4467.38 BogoMIPS (lpj=8934776) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) XP 3200+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. ACPI: setting ELCR to 0200 (from 0e28) checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 3396k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11 ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs *23) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e8000000-e80fffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x5000-0x500f has been reserved Initializing Cryptographic API PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3 ttyS1 at I/O 0xa400 (irq = 3) is a 16550A ttyS2 at I/O 0xa800 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize loop: loaded (max 8 devices) NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered TCP bic registered Using IPI Shortcut mode ACPI wakeup devices: SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 ECP1 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3396KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem) readonly. input: AT Translated Set 2 keyboard on isa0060/serio0 Freeing unused kernel memory: 140k freed NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: ST3120022A, ATA DISK drive hdb: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > VFS: Can't find ext3 filesystem on dev hda5. VFS: Can't find an ext2 filesystem on dev hda5. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev hda5. Unable to identify CD-ROM format. NTFS driver 2.1.23 [Flags: R/O MODULE]. Unable to load NLS charset cp437 NTFS-fs error (device hda5): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device hda5): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device hda5): ntfs_fill_super(): Not an NTFS volume. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! Real Time Clock Driver v1.12 Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (52 C) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 10, io base 0x0000dc00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e400 usb 2-1: new full speed USB device using uhci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 11, io base 0x0000e800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver ieee1394: Initialized config rom entry `ip1394' Generic RTC Driver v1.07 ts: Compaq touchscreen protocol output mice: PS/2 mouse device common for all mice parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xe8110000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init] tveeprom(bttv internal): Huh, no eeprom present (err=-121)? bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 eth0: VIA Rhine II at 0x1ec00, 00:50:8d:59:80:f2, IRQ 10. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. SCSI subsystem initialized libata version 1.12 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 sata_via(0000:00:0f.0): routed to hard irq line 11 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 11 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 11 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via NET: Registered protocol family 17 NTFS-fs error (device hda1): parse_options(): Invalid uid option argument: knoppix FAT: Unrecognized mount option "uid=knoppix" or missing value eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 lp0: using parport0 (interrupt-driven). pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Model 1006 Rev 00000000 Serial 10061102 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 3, io mem 0xe8112000 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-1: USB disconnect, address 2 usb 2-1: new full speed USB device using uhci_hcd and address 3 input: PC Speaker hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE] [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [drm:drm_unlock] *ERROR* Process 3860 using kernel context 0 -e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5d00 On node 0 totalpages: 261872 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32496 pages, LIFO batch:7 DMI 2.2 present. ACPI: RSDP (v000 KT600 ) @ 0x000f77a0 ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3000 ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040 ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef7c00 ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000) Built 1 zonelists Kernel command line: dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off vga=normal initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix alsa BOOT_IMAGE=linux __iounmap: bad address c00fffd9 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2232.043 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032300k/1047488k available (1846k kernel code, 14528k reserved, 943k data, 292k init, 129984k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4407.29 BogoMIPS (lpj=2203648) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. CPU0: AMD Athlon(tm) XP 3200+ stepping 00 per-CPU timeslice cutoff: 1462.39 usecs. task migration cache decay timeout: 2 msecs. Total of 1 processors activated (4407.29 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 Brought up 1 CPUs CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1092k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfaf50, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *11 ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs *23) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to [email protected] ** so I can fix the driver. pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x5000-0x500f has been reserved audit: initializing netlink socket (disabled) audit(1134992913.205:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 11, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: ST3120022A, ATA DISK drive hdb: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdb: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache libata version 1.10 loaded. sata_via version 1.1 ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 20 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 20 ata1: no device found (phy stat 00000000) scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 15 ACPI wakeup devices: SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 ECP1 ACPI: (supports S0 S1 S4 S5) RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: irq 21, pci mem 0xe8112000 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 21, io base 0xdc00 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 21, io base 0xe000 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 21, io base 0xe400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: irq 21, io base 0xe800 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ub: sizeof ub_scsi_cmd 64 ub_dev 2504 usbcore: registered new driver ub Initializing USB Mass Storage driver... usb 3-1: new full speed USB device using uhci_hcd and address 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <[email protected]> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) Unable to identify CD-ROM format. VFS: Can't find an ext2 filesystem on dev hda. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev hda. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.02 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 28042 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $ Freeing unused kernel memory: 292k freed Generic RTC Driver v1.07 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (53 C) Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI parallel port detected: 9710:9835, I/O at 0xac00(0xb000) parport1: PC-style at 0xac00 (0xb000) [PCSPP,TRISTATE] Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 19 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 19, latency: 32, mmio: 0xe8110000 bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init] tveeprom(bttv internal): Huh, no eeprom present (err=-121)? bttv0: using tuner=-1 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 940M agpgart: AGP aperture is 128M @ 0xe0000000 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0xe8113000, 00:50:8d:59:80:f2, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. NTFS driver 2.1.22 [Flags: R/W MODULE]. NTFS volume version 3.1. Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 lp0: using parport0 (interrupt-driven). lp0: console ready lp1: using parport1 (polling). apm: BIOS not found. [drm] Initialized drm 1.0.0 20040925 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 Model 1006 Rev 00000000 Serial 10061102 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI interrupt 0000:00:0c.1[A] -> GSI 19 (level, low) -> IRQ 19 bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 19, latency: 32, memory: 0xe8111000 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ts: Compaq touchscreen protocol output CPU0 0: 245167 XT-PIC [.........N/ 0] timer 1: 116 XT-PIC [........../ 0] i8042 2: 0 XT-PIC [.........N/ 0] cascade 3: 2 XT-PIC [........../ 0] ehci_hcd:usb5 7: 1 XT-PIC [........../ 0] parport0 8: 1 XT-PIC [........../ 0] rtc 9: 0 XT-PIC [........../ 0] acpi 10: 1029 XT-PIC [........../ 0] uhci_hcd:usb1, uhci_hcd:usb2, eth0, snd_ca0106 11: 3 XT-PIC [........../ 0] uhci_hcd:usb3, uhci_hcd:usb4, bttv0, libata 12: 39473 XT-PIC [........../ 0] i8042 14: 9409 XT-PIC [........../ 0] ide0 15: 45 XT-PIC [........../ 0] ide1 NMI: 0 ERR: 0 _________________________________________ CPUINFO processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3200+ stepping : 0 cpu MHz : 2230.932 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4467.38 _________________________________________ snd-page-alloc pages : 528384 bytes (129 pages per 4kB) _________________________________________ MEMINFO _________________________________________ ______Placas de sonido reconocidas__________ ___________por el sistema__________________ _________________________________________ cat /proc/asound/cards 0 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xa000 irq 10 _________________________________________ HWSETUP --- class: OTHER bus: PCI device: (null) driver: i2c-viapro desc: Unknown vendor|Generic i2c-viapro device --- class: OTHER bus: PCI device: (null) driver: via82cxxx desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE --- class: OTHER bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: OTHER bus: PCI device: (null) driver: unknown desc: VIA Technologies|VT8237 PCI Bridge --- class: OTHER bus: USB device: (null) driver: unknown desc: Canon, Inc. CanoScan N1240U/LiDE 30 --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.13-1-multimedia-386 ehci_hcd VIA Technologies, Inc. USB 2.0 --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.13-1-multimedia-386 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) --- class: OTHER bus: PCI device: (null) driver: unknown desc: VIA Technologies|VT8377 [KT400 AGP] Host Bridge --- class: NETWORK bus: PCI device: eth driver: via-rhine desc: VIA Technologies|VT82C100A [Rhine 10/100] write config(/etc/sysconfig/netcard) update config(/etc/sysconfig/knoppix) --- class: MOUSE bus: PSAUX device: psaux driver: msintellips/2 desc: Generic PS/2 Wheel Mouse write config(/etc/sysconfig/mouse) update config(/etc/sysconfig/knoppix) symlink(/dev/psaux,/dev/mouse) --- class: AUDIO bus: PCI device: (null) driver: snd-ca0106 desc: Unknown vendor|Generic snd-ca0106 device write config(/etc/sysconfig/sound) update config(/etc/sysconfig/knoppix) --- class: CDROM bus: IDE device: hdb driver: ignore desc: TOSHIBA ODD-DVD SD-M1802 symlink(/dev/hdb,/dev/cdrom) --- class: CDROM bus: IDE device: hdd driver: ignore desc: LITE-ON LTR-52327S symlink(/dev/hdd,/dev/cdrom1) --- class: MODEM bus: PCI device: (null) driver: unknown desc: Rockwell International|HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem --- class: MODEM bus: PCI device: ttyS1 driver: parport_serial desc: NetMos Technology|222N-2 I/O Card (2S+1P) symlink(/dev/ttyS1,/dev/modem1) --- class: VIDEO bus: PCI device: (null) driver: Card:ATI Radeon 9200SE desc: ATI|Radeon 9200SE write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: VIDEO bus: PCI device: (null) driver: Card:ATI Radeon 9200SE desc: ATI|Radeon 9200SE write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: FLOPPY bus: UNKNOWN device: fd0 driver: unknown desc: 3.5" 1.44MB floppy drive write config(/etc/sysconfig/floppy) update config(/etc/sysconfig/knoppix) --- class: HD bus: IDE device: hda driver: ignore desc: ST3120022A --- class: RAID bus: PCI device: (null) driver: sata_via desc: Unknown vendor|Generic sata_via device --- class: CAPTURE bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: USB bus: PCI device: (null) driver: ehci-hcd desc: VIA Technologies|USB 2.0 --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB _________________________________________ ESPACIO_USADO_LIBRE S.ficheros Tamaño Usado Disp Uso% Montado en /dev/hda5 26G 1,8G 24G 7% / tmpfs 443M 0 443M 0% /dev/shm /dev/hda1 35G 18G 17G 52% /mnt/hda1 /dev/hda3 26G 17G 8,7G 66% /mnt/hda3 /dev/hda6 27G 20G 7,4G 73% /mnt/hda6 _________________________________________ Modulos ALSA cargados snd_ca0106 27812 0 snd_ac97_codec 76924 1 snd_ca0106 snd_pcm_oss 50976 0 snd_mixer_oss 17280 1 snd_pcm_oss snd_pcm 86660 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss snd_timer 24068 1 snd_pcm snd 52068 6 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 9952 1 snd snd_page_alloc 9476 2 snd_ca0106,snd_pcm _________________________________________ Modulos OSS cargados soundcore 9952 1 snd _________________________________________ Linux Musika 2.6.13-1-multimedia-386 #1 Sun Sep 11 17:26:59 CEST 2005 i686 GNU/Linux CPU0 0: 604691 IO-APIC-edge timer 1: 94 IO-APIC-edge i8042 7: 2 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 33358 IO-APIC-edge i8042 14: 7375 IO-APIC-edge ide0 15: 69 IO-APIC-edge ide1 16: 39591 IO-APIC-level radeon@PCI:1:0:0, snd_ca0106 19: 3 IO-APIC-level bttv0, bt878 20: 0 IO-APIC-level libata 21: 59 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd 23: 146 IO-APIC-level eth0 NMI: 0 LOC: 604649 ERR: 0 MIS: 0 _________________________________________ CPUINFO processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3200+ stepping : 0 cpu MHz : 2232.043 cache size : 512 KB physical id : 0 siblings : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow bogomips : 4407.29 _________________________________________ snd-page-alloc pages : 528384 bytes (129 pages per 4kB) _________________________________________ MEMINFO _________________________________________ ______Placas de sonido reconocidas__________ ___________por el sistema__________________ _________________________________________ cat /proc/asound/cards 0 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xa000 irq 16 _________________________________________ HWSETUP --- class: OTHER bus: PCI device: (null) driver: i2c-viapro desc: Unknown vendor|Generic i2c-viapro device --- class: OTHER bus: PCI device: (null) driver: ignore desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE --- class: OTHER bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: OTHER bus: PCI device: (null) driver: via-agp desc: VIA Technologies|VT8237 PCI Bridge --- class: OTHER bus: USB device: (null) driver: unknown desc: Canon, Inc. CanoScan N1240U/LiDE 30 --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.11 ehci_hcd VIA Technologies, Inc. USB 2.0 --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.11 uhci_hcd VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) --- class: OTHER bus: PCI device: (null) driver: via-agp desc: VIA Technologies|VT8377 [KT400 AGP] Host Bridge --- class: NETWORK bus: PCI device: eth driver: via-rhine desc: VIA Technologies|VT82C100A [Rhine 10/100] write config(/etc/sysconfig/netcard) update config(/etc/sysconfig/knoppix) --- class: MOUSE bus: PSAUX device: psaux driver: msintellips/2 desc: Generic PS/2 Wheel Mouse write config(/etc/sysconfig/mouse) update config(/etc/sysconfig/knoppix) symlink(/dev/psaux,/dev/mouse) --- class: AUDIO bus: PCI device: (null) driver: snd-ca0106 desc: Unknown vendor|Generic snd-ca0106 device write config(/etc/sysconfig/sound) update config(/etc/sysconfig/knoppix) --- class: CDROM bus: IDE device: hdb driver: ignore desc: TOSHIBA ODD-DVD SD-M1802 symlink(/dev/hdb,/dev/cdrom) --- class: CDROM bus: IDE device: hdd driver: ignore desc: LITE-ON LTR-52327S symlink(/dev/hdd,/dev/cdrom1) --- class: MODEM bus: PCI device: (null) driver: unknown desc: Rockwell International|HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem --- class: MODEM bus: PCI device: (null) driver: parport_serial desc: NetMos Technology|222N-2 I/O Card (2S+1P) --- class: VIDEO bus: PCI device: (null) driver: Card:ATI Radeon 9200SE desc: ATI|Radeon 9200SE write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: VIDEO bus: PCI device: (null) driver: Card:ATI Radeon 9200SE desc: ATI|Radeon 9200SE write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: FLOPPY bus: UNKNOWN device: fd0 driver: unknown desc: 3.5" 1.44MB floppy drive write config(/etc/sysconfig/floppy) update config(/etc/sysconfig/knoppix) --- class: HD bus: IDE device: hda driver: ignore desc: ST3120022A --- class: RAID bus: PCI device: (null) driver: unknown desc: VIA Technologies|unknown device 1106:3149 --- class: CAPTURE bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: USB bus: PCI device: (null) driver: ehci-hcd desc: VIA Technologies|USB 2.0 --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB _________________________________________ ESPACIO_USADO_LIBRE S.ficheros Tamaño Usado Disp Uso% Montado en /dev/root 3,4M 16K 3,4M 1% / /dev/hdb 700M 700M 0 100% /cdrom /dev/cloop 1,8G 1,8G 0 100% /KNOPPIX /ramdisk 796M 4,5M 791M 1% /ramdisk /UNIONFS 2,5G 1,8G 791M 69% /UNIONFS /dev/hda1 35G 18G 17G 52% /mnt/hda1 /dev/hda3 26G 17G 8,7G 66% /mnt/hda3 /dev/hda5 26G 1,8G 24G 7% /mnt/hda5 /dev/hda6 27G 20G 7,4G 73% /mnt/hda6 _________________________________________ Modulos ALSA cargados snd_ca0106 27172 0 snd_ac97_codec 68216 1 snd_ca0106 snd_pcm_oss 47904 0 snd_pcm 77828 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss snd_timer 23684 1 snd_pcm snd_page_alloc 11268 2 snd_ca0106,snd_pcm snd_mixer_oss 18688 1 snd_pcm_oss snd 46308 6 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 11104 1 snd _________________________________________ Modulos OSS cargados soundcore 11104 1 snd _________________________________________ Linux Musix 2.6.11 #3 SMP Mon May 2 00:19:56 CEST 2005 i686 GNU/Linux