On Saturday 25 February 2006 10:31, Eric H. Johnson wrote:
Hi all,
Are SATA drives not supported by the BDI? I successfully did an install etc. on a system with IDE drives, but now when I try to do it on one with SATA drives I immediately get the notice "No hard drives have been found. You probably need to manually chose device drivers for the installation to succeed. Would you like to select drivers now?" The system does in fact have two SATA hard drives.
I tried several of the options for installing drivers manually or custom setup, but the necessary drivers are never listed. However proceeding as far as I can with the install invariably ends up with the message "An error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of the problem."
Any ideas?
Sata drives are another kettle of fish for us. To be usable, the correct drivers for the sata chipset on the motherboard will need to be compiled directly into the kernel, along with the correct filesystems drivers. This is also true for ide/atapi stuff now. I think it can be done, but I have not, no sata drives yet here at the coyote.den domain. It will require a kernel rebuild/reinstall after re-configuring it. That I do regularly anyway.
Thanks, Eric
_______________________________________________ Bdi4emc-help mailing list [email protected] http://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help
-- Cheers, Gene People having trouble with vz bouncing email to me should add the word 'online' between the 'verizon', and the dot which bypasses vz's stupid bounce rules. I do use spamassassin too. :-) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved.