[Solar-tecnica] ¡¡¡ No nos funciona NINGÚN programa de AstroloGía en GNU/Linux !!!

Marcos Guglielmetti marcospcmusica en gmail.com
Vie Nov 3 16:25:25 CET 2006 

Hola Ricardo Eureka!:
> 2006/11/2, Marcos Guglielmetti <marcospcmusica en gmail.com>:
> > Hola Ricardo Eureka!:
> > > > > mmm como instalaste el postgresql?
> > > >
> > > > apt-get
> > >
> > > te acordas el nombre del/los paquetes?
> >
> >  sudo apt-get install postgresql-8.1 libqt3-mt-psql
> > Se instalarán los siguientes paquetes extras:
> >   postgresql-client-8.1 postgresql-client-common postgresql-common
> > ssl-cert Se instalarán los siguientes paquetes NUEVOS:
> >   libqt3-mt-psql postgresql-8.1 postgresql-client-8.1
> > postgresql-client-common postgresql-common ssl-cert
>
> Por otro lado creo recordar que hay un postgresql-server a instalar,
> verificalo con:
>
> sudo aptitude search postgresql

Está instalado (gracias por la ayuda igual, entre gente que en vez de ayudar 
juzgó la creencia/ciencia, esta ayuda es valiosa!)

> > 0 actualizados, 6 se instalarán, 0 para eliminar y 915 no actualizados.
> > Se necesita descargar 5891kB/5930kB de archivos.
> > Se utilizarán 17,2MB
> > ..................................................................
> >
> > * Y para administrar la base de datos se necesita:
> >
> > * El problema es que no puedo iniciar postgresql:
> >
> > sudo ./postgresql-8.1 start
> > Starting PostgreSQL 8.1 database server: main* Insecure directory in
> > $ENV{PATH} while running with -T switch at /usr/bin/pg_ctlcluster line
> > 52. failed!
>
> Fijate que aca no introducis lo que yo te indique:
> sudo /etc/init.d/postgresql-8.1 start
>

Es porque estoy en ese directorio: /etc/init.d/, por eso sólo hago 
sudo ./postgresql-8.1 start

Si lo hago del modo en que me dijiste, sucede lo mismo, ya respondí a eso.

> Intenta entrar a la bbdd desde linea de comandos para verificar que
> este corriendo 

No sé cómo se hace eso.

> y, ademas, corrobora la configuracion del pg_hba.conf 
> para ver si esta aceptando las peticiones que necesita es programa, el
> cual no tengo NPI como funciona, por cierto.

Les muestro ph_hba.conf (GRACIAS):

# PostgreSQL Client Authentication Configuration File
# ===================================================
#
# Refer to the PostgreSQL Administrator's Guide, chapter "Client
# Authentication" for a complete description.  A short synopsis
# follows.
#
# This file controls: which hosts are allowed to connect, how clients
# are authenticated, which PostgreSQL user names they can use, which
# databases they can access.  Records take one of these forms:
#
# local      DATABASE  USER  METHOD  [OPTION]
# host       DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTION]
# hostssl    DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTION]
# hostnossl  DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTION]
#
# (The uppercase items must be replaced by actual values.)
#
# The first field is the connection type: "local" is a Unix-domain socket,
# "host" is either a plain or SSL-encrypted TCP/IP socket, "hostssl" is an
# SSL-encrypted TCP/IP socket, and "hostnossl" is a plain TCP/IP socket.
#
# DATABASE can be "all", "sameuser", "samerole", a database name, or
# a comma-separated list thereof.
#
# USER can be "all", a user name, a group name prefixed with "+", or
# a comma-separated list thereof.  In both the DATABASE and USER fields
# you can also write a file name prefixed with "@" to include names from
# a separate file.
#
# CIDR-ADDRESS specifies the set of hosts the record matches.
# It is made up of an IP address and a CIDR mask that is an integer
# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
# the number of significant bits in the mask.  Alternatively, you can write
# an IP address and netmask in separate columns to specify the set of hosts.
#
# METHOD can be "trust", "reject", "md5", "crypt", "password",
# "krb5", "ident", or "pam".  Note that "password" sends passwords
# in clear text; "md5" is preferred since it sends encrypted passwords.
#
# OPTION is the ident map or the name of the PAM service, depending on METHOD.
#
# Database and user names containing spaces, commas, quotes and other special
# characters must be quoted. Quoting one of the keywords "all", "sameuser" or
# "samerole" makes the name lose its special character, and just match a
# database or username with that name.
#
# This file is read on server startup and when the postmaster receives
# a SIGHUP signal.  If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect.  You can use
# "pg_ctl reload" to do that.

# Put your actual configuration here
# ----------------------------------
#
# If you want to allow non-local connections, you need to add more
# "host" records. In that case you will also need to make PostgreSQL listen
# on a non-local interface via the listen_addresses configuration parameter,
# or via the -i or -h command line switches.
#




# DO NOT DISABLE!
# If you change this first entry you will need to make sure that the
# database
# super user can access the database using some other method.
# Noninteractive
# access to all databases is required during automatic maintenance
# (autovacuum, daily cronjob, replication, and similar tasks).
#
# Database administrative login by UNIX sockets
local   all         postgres                          ident sameuser

# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD

# "local" is for Unix domain socket connections only
local   all         all                               ident sameuser
# IPv4 local connections:
host    all         all         127.0.0.1/32          md5
# IPv6 local connections:
host    all         all         ::1/128               md5





> > * Skylendar hace un crash y sale luego de que ingreso nombre de base de
> > datos y esas cosas que me pregunta. (también hacía el crash antes de
> > instalar postrgresql)
> >
> >
> > --
> > Marcos Guglielmetti
> > * Director del desarrollo de Musix GNU+Linux, 100% Software Libre
> > * CD Donwload: (http://www.musix.org.ar/en/)
> > * Videos, programas y otras cosas en:
> > ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a:
> > https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs
> > *IRC: #musix channel on freenode
> > * Torrent Download:
> > https://e.ututo.org.ar/utiles/torrent/MusixGNU-Linux0.59.iso.torrent

-- 
Marcos Guglielmetti  
* Director del desarrollo de Musix GNU+Linux, 100% Software Libre
* CD Donwload: (http://www.musix.org.ar/en/)
* Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/
* Reporte de errores a: 
https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs
*IRC: #musix channel on freenode
* Torrent Download:
https://e.ututo.org.ar/utiles/torrent/MusixGNU-Linux0.59.iso.torrent

Más información sobre la lista de distribución Solar-tecnica