[Musix-usuarios] Reporte musix 0.49
Jorge Salgueiro
jorge.salgueiro en gmail.com
Lun Jul 3 17:12:51 CEST 2006
2006/7/3, Rodolfo Lopez <rodolfo.lopez.g en gmail.com>:
>
> Saludos.
>
> He probado algunos scripts de musix en opensuse 64bits (soy travieso),
> y funcionan bien. Convertir midi a audio, y otros. El problema es que
> opensuse no es para músicos, y algunos programas debo instalarlos a
> pie. Lógico.
>
> Reportes: Probando musix 0.49:
>
> Tengo el mismo problema de reconociemiento de impresoras: cupsys no
> está trabajando bien en la instalación tipo debian o knoppix. Marcos
> dice que esto es muy complejo, pero creo que debo reportarlo de nuevo.
> Instalé igual que el disco live y la impresora sí corre bien. Ahora el
> modem no se bloquea.
>
> Rosegarden no da el aviso de System timer resolution is too low.
>
> Cambio y fuera...
como se cambia?
*************
>
> PCINFO:
>
> CPU0
> 0: 2928289 IO-APIC-edge timer
> 1: 1790 IO-APIC-edge i8042
> 2: 0 XT-PIC cascade
> 8: 5 IO-APIC-edge rtc
> 12: 118863 IO-APIC-edge i8042
> 14: 34425 IO-APIC-edge ide0
> 15: 24 IO-APIC-edge ide1
> 16: 4 IO-APIC-level ohci1394
> 17: 102490 IO-APIC-level bttv0
> 19: 29918 IO-APIC-level EMU10K1
> 21: 210499 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2,
> uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
> NMI: 0
> LOC: 2928131
> ERR: 0
> MIS: 0
> _________________________________________
> CPUINFO
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 12
> model name : AMD Athlon(tm) 64 Processor 3200+
> stepping : 0
> cpu MHz : 2200.139
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov
> pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext
> 3dnow lahf_lm ts fid vid ttp
> bogomips : 4405.78
>
> _________________________________________
> snd-page-alloc
> pages : 58101760 bytes (14185 pages per 4kB)
> _________________________________________
> MEMINFO
>
> _________________________________________
>
> Placas de sonido reconocidas
> por el sistema
> _________________________________________
>
>
> cat /proc/asound/cards
> 0 [Audigy2 ]: Audigy2 - Audigy 2 Platinum [SB0240P]
> Audigy 2 Platinum [SB0240P] (rev.4,
> serial:0x10021102) at 0xe800, irq 19
> cat /proc/isapnp >>/tmp/pcinfo.txt
> _________________________________________
> HWSETUP
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: Advanced Micro Devices [AMD]|K8 NorthBridge
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: Advanced Micro Devices [AMD]|K8 NorthBridge
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: Advanced Micro Devices [AMD]|K8 NorthBridge
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: Advanced Micro Devices [AMD]|K8 NorthBridge
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: i2c-viapro
> desc: Unknown vendor|Generic i2c-viapro device
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: pata_via
> desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235
> PIPC Bus Master IDE
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: emu10k1-gp
> desc: Creative Labs|SB Audigy MIDI/Game port
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: bttv
> desc: Brooktree Corporation|Bt878
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: VIA Technologies|unknown device 1106:b188
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: 600DPI USB Scanner
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: Linux 2.6.16-beyond4.1 ehci_hcd EHCI Host Controller
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
> ---
> class: OTHER
> bus: PCI
> device: (null)
> driver: unknown
> desc: VIA Technologies|unknown device 1106:3188
> ---
> class: OTHER
> bus: USB
> device: (null)
> driver: unknown
> desc: unknown
> ---
> class: NETWORK
> bus: PCI
> device: eth
> driver: r8169
> desc: Realtek|RTL-8169
> write config(/etc/sysconfig/netcard)
> update config(/etc/sysconfig/knoppix)
> ---
> class: MOUSE
> bus: PSAUX
> device: psaux
> driver: msintellips/2
> desc: Generic PS/2 Wheel Mouse
> write config(/etc/sysconfig/mouse)
> update config(/etc/sysconfig/knoppix)
> symlink(/dev/psaux,/dev/mouse)
> ---
> class: AUDIO
> bus: PCI
> device: (null)
> driver: emu10k1
> desc: Creative Labs|SB Audigy
> write config(/etc/sysconfig/sound)
> update config(/etc/sysconfig/knoppix)
> ---
> class: CDROM
> bus: IDE
> device: hdc
> driver: ignore
> desc: HL-DT-ST DVDRAM GSA-4040B
> symlink(/dev/hdc,/dev/cdrom)
> ---
> class: CDROM
> bus: IDE
> device: hdd
> driver: ignore
> desc: LITE-ON DVDRW SHW-160P6S
> symlink(/dev/hdd,/dev/cdrom1)
> ---
> class: VIDEO
> bus: PCI
> device: (null)
> driver: Server:XFree86(nv)
> desc: Vanta [NV6]
> write config(/etc/sysconfig/xserver)
> update config(/etc/sysconfig/knoppix)
> ---
> class: FLOPPY
> bus: UNKNOWN
> device: fd0
> driver: unknown
> desc: 3.5" 1.44MB floppy drive
> write config(/etc/sysconfig/floppy)
> update config(/etc/sysconfig/knoppix)
> ---
> class: HD
> bus: IDE
> device: hda
> driver: ignore
> desc: ST380011A
> ---
> class: HD
> bus: IDE
> device: hdb
> driver: ignore
> desc: ST3120022A
> ---
> class: PRINTER
> bus: USB
> device: (null)
> driver: unknown
> desc: Seiko Epson Corp. Stylus Printer
> ---
> class: CAPTURE
> bus: PCI
> device: (null)
> driver: bttv
> desc: Brooktree Corporation|Bt878
> ---
> class: USB
> bus: PCI
> device: (null)
> driver: ehci-hcd
> desc: VIA Technologies|USB 2.0
> ---
> class: USB
> bus: PCI
> device: (null)
> driver: usb-uhci
> desc: VIA Technologies|USB
> ---
> class: USB
> bus: PCI
> device: (null)
> driver: usb-uhci
> desc: VIA Technologies|USB
> ---
> class: USB
> bus: PCI
> device: (null)
> driver: usb-uhci
> desc: VIA Technologies|USB
> ---
> class: USB
> bus: PCI
> device: (null)
> driver: usb-uhci
> desc: VIA Technologies|USB
> ---
> class: UNKNOWN
> bus: PCI
> device: (null)
> driver: ohci1394
> desc: Unknown vendor|unknown device 1102:4001
> _________________________________________
> ESPACIO_USADO_LIBRE
> S.ficheros Tamaño Usado Disp Uso% Montado en
> /dev/hdb8 8,9G 1,7G 7,2G 20% /
> tmpfs 506M 0 506M 0% /dev/shm
> _________________________________________
> Modulos ALSA cargados
> snd_rtctimer 3468 0
> snd_emu10k1_synth 6656 0
> snd_emux_synth 31616 1 snd_emu10k1_synth
> snd_seq_virmidi 6912 1 snd_emux_synth
> snd_seq_midi_emul 5888 1 snd_emux_synth
> snd_seq_dummy 3844 0
> snd_seq_oss 30052 0
> snd_seq_midi 8096 0
> snd_seq_midi_event 6912 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
> snd_seq 45644 9
>
> snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_emu10k1 103588 5 snd_emu10k1_synth
> snd_rawmidi 22944 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1
> snd_ac97_codec 83360 1 snd_emu10k1
> snd_ac97_bus 2304 1 snd_ac97_codec
> snd_pcm_oss 36512 0
> snd_mixer_oss 16512 1 snd_pcm_oss
> snd_pcm 75656 5 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
> snd_seq_device 8076 8
>
> snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi
> snd_timer 21124 4 snd_rtctimer,snd_seq,snd_emu10k1,snd_pcm
> snd_page_alloc 9608 2 snd_emu10k1,snd_pcm
> snd_util_mem 4608 2 snd_emux_synth,snd_emu10k1
> snd_hwdep 8836 2 snd_emux_synth,snd_emu10k1
> snd 49024 21
>
> snd_rtctimer,snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
> soundcore 9312 3 emu10k1,sound,snd
> _________________________________________
> Modulos OSS cargados
> sound 70416 1 emu10k1
> soundcore 9312 3 emu10k1,sound,snd
> _________________________________________
> ________________VIDEO______________________
> ________________Xorg________________________
> Section "ServerLayout"
> Identifier "Xorg Configurado"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> # PS/2 Mouse using /dev/input/mice in Kernel 2.6
> # Serial Mouse not detected
> InputDevice "USB Mouse" "CorePointer"
> EndSection
>
> Section "ServerFlags"
> Option "AllowMouseOpenFail" "true"
>
> EndSection
>
> Section "Files"
> RgbPath "/usr/X11R6/lib/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/misc"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
> FontPath "/usr/X11R6/lib/X11/fonts/PEX"
> # Additional fonts: Locale, Gimp, TTF...
> FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
> # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
> # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
> # True type and type1 fonts are also handled via xftlib, see
> /etc/X11/XftConfig!
> FontPath "/usr/X11R6/lib/X11/fonts/Type1"
> FontPath "/usr/share/fonts/ttf/western"
> FontPath "/usr/share/fonts/ttf/decoratives"
> FontPath "/usr/share/fonts/truetype"
> FontPath "/usr/share/fonts/truetype/openoffice"
> FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
> FontPath "/usr/share/fonts/latex-ttf-fonts"
> FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
> FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
> EndSection
>
> Section "Module"
> Load "ddc" # ddc probing of monitor
> Load "GLcore"
> Load "dbe"
> Load "dri"
> Load "extmod"
> Load "glx"
> Load "bitmap" # bitmap-fonts
> Load "speedo"
> Load "type1"
> Load "freetype"
> Load "record"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> #otras opciones para layout pueden ser "es" (, teclado latinoamericano
> estandar Ñ en los :, ' genera acentos...)
> #"us_intl" (' genera acentos, META+5 ->euro, etc).
> #us: teclado windoze estandar, WIN_L/R -> Super_L/R (Mod 4). [Alt_L/R
> -> Alt y Meta]_L/R (Mod 1)
> Option "XkbLayout" "es"
>
>
> EndSection
>
> Section "InputDevice"
> Identifier "Serial Mouse"
> Driver "mouse"
> Option "Protocol" "Microsoft"
> Option "Device" "/dev/ttyS0"
> Option "Emulate3Buttons" "true"
> Option "Emulate3Timeout" "70"
> Option "SendCoreEvents" "true"
> EndSection
>
> Section "InputDevice"
> Identifier "PS/2 Mouse"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "ZAxisMapping" "4 5"
> Option "Device" "/dev/psaux"
> Option "Emulate3Buttons" "true"
> Option "Emulate3Timeout" "70"
> Option "SendCoreEvents" "true"
> EndSection
>
> Section "InputDevice"
> Identifier "USB Mouse"
> Driver "mouse"
> Option "Device" "/dev/input/mice"
> Option "SendCoreEvents" "true"
> Option "Protocol" "IMPS/2"
> Option "ZAxisMapping" "4 5"
> Option "Buttons" "5"
> EndSection
>
> # Auto-generated by KNOPPIX mkxf86config
>
> Section "Monitor"
> Identifier "Monitor0"
> Option "DPMS" "true"
> VendorName "KDS"
> ModelName "KDS1745"
> HorizSync 30 - 70 # DDC-probed
> VertRefresh 50 - 160 # DDC-probed
> # These are the DDC-probed settings reported by your monitor.
> # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
> ModeLine "1024x768" 94.50 1024 1072 1168
> 1376 768 769 772 808
> +hsync +vsync
> # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
> ModeLine "1024x768" 78.75 1024 1040 1136
> 1312 768 769 772 800
> +hsync +vsync
> # 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
> ModeLine "800x600" 56.25 800 832 896
> 1048 600 601 604 631 +hsync +vsync
> # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
> ModeLine "800x600" 49.50 800 816 896
> 1056 600 601 604 625 +hsync +vsync
> # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
> ModeLine "800x600" 40.00 800 840 968
> 1056 600 601 605 628 +hsync +vsync
> # 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
> ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509
> -hsync -vsync
> # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
> ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509
> -hsync -vsync
> # Extended modelines with GTF timings
> # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
> ModeLine "640x480" 43.16 640 680 744 848 480 481 484
> 509 -HSync +Vsync
> # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
> ModeLine "768x576" 34.96 768 792 872 976 576 577 580
> 597 -HSync +Vsync
> # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
> ModeLine "768x576" 42.93 768 800 880 992 576 577 580
> 601 -HSync +Vsync
> # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
> ModeLine "768x576" 45.51 768 808 888 1008 576 577 580
> 602 -HSync +Vsync
> # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
> ModeLine "768x576" 51.84 768 808 888 1008 576 577 580
> 605 -HSync +Vsync
> # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
> ModeLine "768x576" 62.57 768 816 896 1024 576 577 580
> 611 -HSync +Vsync
> # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
> ModeLine "800x600" 68.18 800 848 936 1072 600 601 604
> 636 -HSync +Vsync
> # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
> ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814
> -HSync +Vsync
> # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
> ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868
> 895 -HSync +Vsync
> # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
> ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907
> -HSync +Vsync
> # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
> ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915
> -HSync +Vsync
> # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
> ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001
> -HSync +Vsync
> # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
> ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002
> -HSync +Vsync
> # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
> ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017
> -HSync +Vsync
> # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
> ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028
> 1085 -HSync +Vsync
> # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
> ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054
> 1087 -HSync +Vsync
> # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
> ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054
> 1094 -HSync +Vsync
> # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
> ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054
> 1096 -HSync +Vsync
> # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
> ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054
> 1103 -HSync +Vsync
> # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
> ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054
> 1112 -HSync +Vsync
> # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
> ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204
> 1271 -HSync +Vsync
> # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz
> Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204
> 1242
> -HSync +HSync
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> # sw_cursor is needed for some ati and radeon cards
> Option "sw_cursor"
> #Option "hw_cursor"
> #Option "NoAccel"
> #Option "ShowCache"
> #Option "ShadowFB"
> #Option "UseFBDev"
> #Option "Rotate"
> Identifier "Card0"
> # The following line is auto-generated by KNOPPIX mkxf86config
> Driver "nv"
> VendorName "All"
> BoardName "All"
> # BusID "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultColorDepth 16
> SubSection "Display"
> Depth 1
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 32
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
> _________________________________________
> ______________errores de video________________
> Xsession: X session started for root at dom jul 2 07:29:05 CEST 2006
> Configurando el teclado en Entorno Gráfico en español
> menu "Texto-Oficina" folder {
> menu "Oficina" folder {
> IceWM: using /root/.icewm for private configuration files
> icewmtray: using /root/.icewm for private configuration files
> DCOPClient::attachInternal. Attach failed Could not open network socket
> DCOPClient::attachInternal. Attach failed Could not open network socket
> sox: Can't open output file '/dev/dsp': No such device
> IceWM: Atención: Deprecated option: warpPointer == true
> IceWM: Atención: Deprecated option: showPopupsAbovePointer == true
> IceWM: Atención: Deprecated option: sizeMaximized == true
> IceWM: Opción de ventana desconocida: onTop
> IceWM: Atención: Deprecated option: "ignoreWinlist windowoption"
> kbuildsycoca running...
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/gnome_wave_cleaner.xpm"
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/gnome_wave_cleaner.xpm"
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/gnome_wave_cleaner.xpm"
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/jack-rack.xpm"
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/jack-rack.xpm"
> IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
> All fallbacks failed.
> See /usr/share/doc/imlib2/README.fallback.
> IceWM: Atención: Error en la carga de la imagen
> "/usr/share/pixmaps/jack-rack.xpm"
> This is xawtv-3.94, running on Linux/i686 (2.6.16-beyond4.1)
>
> This is xdtv 2.3.2 running on Linux/i686 (2.6.16-beyond4.1).
> scandir: No existe el fichero o el directorio
> filename = /root/.xdtv/xdtvrc
> /root/.xdtv/xdtvrc:14: invalid value for fullscreen_mode: old
> WARNING: xdtv_v4l-conf is compiled without DGA support.
> wmhooks: netwm detected
> wmhooks: netwm state above supported
> wmhooks: netwm fullscreen supported
> wmhooks: gnome detected
> Selected XvImage adaptor with yuyv support: NV Video Blitter on port
> 65 (grabdisplay)
> No XvVideo port available.
> *** AUDIO DEVICE TYPE = alsa
> *** GRABBER DEVICE TYPE = v4l2
> *** MIXER DEVICE TYPE = alsa
> MMX, SSE, AMD MMX extensions, SSE2, 3DNOW, have been detected.
> Method sse
> IceWM: APP BUG? mapRequest for window 8013CB sent to destroyed frame
> 1400184!
> libkonq: WARNING: Could not load wallpaper
>
> /root/.kde/share/apps/kthememanager/themes/Musix/wallpapers/konqueror/kde4ever.png
> kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle
> '/etc/samba/smb.conf'
> kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle
> '/etc/security/fileshare.conf'
> kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle '/etc/exports'
> sending IMStart with 0 chars to 0x81441a8
> sending IMEnd with 1 chars to 0x81441a8, text=á
> sending IMStart with 0 chars to 0x81441a8
> sending IMEnd with 1 chars to 0x81441a8, text=é
> sending IMStart with 0 chars to 0x81441a8
> sending IMEnd with 1 chars to 0x81441a8, text=ó
> Opener: received SetSecret
> Opener: received SetSecret
> Opener: received OpenLock
>
> Opener: received OpenDevice
> Opener: received ExecPPPDaemon
> In parent: pppd pid 11321
> Couldn't find interface ppp0: No existe tal dispositivo
> Kernel supports ppp alright.
> Couldn't find interface ppp0: No existe tal dispositivo
> Couldn't find interface ppp0: No existe tal dispositivo
> Couldn't find interface ppp0: No existe tal dispositivo
> Opener: received OpenResolv
> Opener: received RemoveSecret
> Opener: received RemoveSecret
> Extension System Warning: Failed to set up default extensions files
> probably because you do not have write privileges to this location.
> While you can run Firefox like this, it is recommended that you run it
> at least once with privileges that allow it to generate these initial
> files to improve start performance. Running from a disk image on MacOS
> X is not recommended.Opener: received KillPPPDaemon
> In killpppd(): Sending SIGTERM to 11321
> Opener: received RemoveSecret
> Opener: received RemoveSecret
> Opener: received OpenResolv
> Opener: received OpenResolv
> Opener: received RemoveLock
> jackd 0.101.1
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
>
> JACK compiled with System V SHM support.
> loading driver ..
> apparent rate = 44100
> creating alsa driver ... hw|hw|2048|2|44100|0|0|nomon|swmeter|-|32bit
> configuring for 44100Hz, period = 2048 frames, buffer = 2 periods
> Note: audio device hw doesn't support a 32bit sample format so JACK
> will try a 24bit format instead
> Note: audio device hw doesn't support a 24bit sample format so JACK
> will try a 16bit format instead
> nperiods = 2 for capture
> Note: audio device hw doesn't support a 32bit sample format so JACK
> will try a 24bit format instead
> Note: audio device hw doesn't support a 24bit sample format so JACK
> will try a 16bit format instead
> nperiods = 2 for playback
> PluginFactory::instance(dssi): creating new DSSIPluginFactory
> [/root/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi]
> WARNING: DSSIPluginFactory::discoverPlugins: couldn't dlopen
> /usr/lib/dssi/fluidsynth-dssi.so - libjack-0.80.0.so.0: no se puede
> abrir el fichero del objeto compartido: No existe el fichero o el
> directorio
> PluginFactory::instance(ladspa): creating new LADSPAPluginFactory
> [/root/.ladspa] [/usr/local/lib/ladspa] [/usr/lib/ladspa]
> Rosegarden 4-1.2.3 - AlsaDriver - alsa-lib version 1.0.10
>
> JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size =
> 2048
> JackDriver::initialiseAudio - creating disk thread
> JackDriver::initialiseAudio - found 2 JACK physical outputs
> JackDriver::initialiseAudio - connecting from "rosegarden:master out
> L" to "alsa_pcm:playback_1"
> JackDriver::initialiseAudio - connecting from "rosegarden:master out
> R" to "alsa_pcm:playback_2"
> JackDriver::initialiseAudio - found 2 JACK physical inputs
> JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to
> "rosegarden:record in 1 L"
> JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to
> "rosegarden:record in 1 R"
> JackDriver::initialiseAudio - initialised JACK audio subsystem
>
> ALSA Client information:
>
> 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX)
> [ctype 2,
> ptype 2, cap 99]
> 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART))
> (DUPLEX)
> [ctype 2, ptype 2, cap 127]
> 16,32 - (Audigy MPU-401 #2, Audigy MPU-401
> #2) (DUPLEX) [ctype
> 2, ptype 2, cap 127]
> 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
>
> CREATED OUTPUT PORT 3:out 1 - MIDI output system device for device 0
> Connecting my port 3 to 16:0 on initialisation
> done
> Creating device 0 in Play mode for connection 16:0 Audigy MPU-401
> (UART) (duplex)
> Default device name for this device is MIDI output system device
> Creating device 1 in Record mode for connection 16:0 Audigy MPU-401
> (UART) (duplex)
> Default device name for this device is MIDI input system device
> CREATED OUTPUT PORT 4:out 2 - MIDI output system device 2 for device 2
> Connecting my port 4 to 16:32 on initialisation
> done
> Creating device 2 in Play mode for connection 16:32 Audigy MPU-401 #2
> (duplex)
> Default device name for this device is MIDI output system device 2
> Creating device 3 in Record mode for connection 16:32 Audigy MPU-401 #2
> (duplex)
> Default device name for this device is MIDI input system device 2
> CREATED OUTPUT PORT 5:out 3 - MIDI output system device 3 for device 4
> Connecting my port 5 to 17:0 on initialisation
> done
> Creating device 4 in Play mode for connection 17:0 Emu10k1 Port 0 (write)
> Default device name for this device is MIDI output system device 3
> CREATED OUTPUT PORT 6:out 4 - MIDI output system device 4 for device 5
> Connecting my port 6 to 17:1 on initialisation
> done
> Creating device 5 in Play mode for connection 17:1 Emu10k1 Port 1 (write)
> Default device name for this device is MIDI output system device 4
> CREATED OUTPUT PORT 7:out 5 - MIDI output system device 5 for device 6
> Connecting my port 7 to 17:2 on initialisation
> done
> Creating device 6 in Play mode for connection 17:2 Emu10k1 Port 2 (write)
> Default device name for this device is MIDI output system device 5
> CREATED OUTPUT PORT 8:out 6 - MIDI output system device 6 for device 7
> Connecting my port 8 to 17:3 on initialisation
> done
> Creating device 7 in Play mode for connection 17:3 Emu10k1 Port 3 (write)
> Default device name for this device is MIDI output system device 6
> CREATED OUTPUT PORT 9:out 7 - MIDI output system device 7 for device 8
> done
> Creating device 8 in Play mode for connection 14:0 Midi Through Port-0
> (duplex) (not connecting)
> Default device name for this device is MIDI output system device 7
> Creating device 9 in Record mode for connection 14:0 Midi Through
> Port-0 (duplex) (not connecting)
> Default device name for this device is MIDI input system device 3
> AlsaDriver::setCurrentTimer((auto))
> Current timer set to "system timer" with timer checks
> AlsaDriver::initialiseMidi - initialised MIDI subsystem
>
> AlsaDriver::setCurrentTimer((auto))
> Current timer set to "system timer" with timer checks
> SoundDriver::getMappedDevice(0) - name = "MIDI output system device"
> type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "MIDI output system device 2"
> type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "MIDI output system device 3"
> type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "MIDI output system device 4"
> type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "MIDI output system device 5"
> type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)"
> recording = 0
> SoundDriver::getMappedDevice(7) - name = "MIDI output system device 6"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "MIDI output system device 7"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "Soft synth connection" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "Audio connection" recording = 0
> Renaming device 0 to General MIDI Device
> Renaming device 2 to MIDI soundcard synth 2
> Renaming device 4 to MIDI soundcard synth 3
> Renaming device 5 to MIDI soundcard synth 4
> Renaming device 6 to MIDI external device
> Renaming device 7 to Nuevo Dispositivo
> Renaming device 8 to Nuevo Dispositivo
> AlsaDriver::setPlausibleConnection: connection like 65:0 Emu10k1 Port
> 0 (write) requested for device 0
> AlsaDriver::setPlausibleConnection: nothing suitable available
> Renamed 128:3 to General MIDI Device
> AlsaDriver::setPlausibleConnection: connection like 65:1 Emu10k1 Port
> 1 (write) requested for device 2
> AlsaDriver::setPlausibleConnection: nothing suitable available
> Renamed 128:4 to MIDI soundcard synth 2
> AlsaDriver::setPlausibleConnection: connection like 65:2 Emu10k1 Port
> 2 (write) requested for device 4
> AlsaDriver::setPlausibleConnection: nothing suitable available
> Renamed 128:5 to MIDI soundcard synth 3
> AlsaDriver::setPlausibleConnection: connection like 65:3 Emu10k1 Port
> 3 (write) requested for device 5
> AlsaDriver::setPlausibleConnection: nothing suitable available
> Renamed 128:6 to MIDI soundcard synth 4
> AlsaDriver::setPlausibleConnection: connection like 64:0 EMU10K1
> MPU-401 (UART) (duplex) requested for device 6
> AlsaDriver::setPlausibleConnection: nothing suitable available
> Renamed 128:7 to MIDI external device
> Renamed 128:8 to Nuevo Dispositivo
> Renamed 128:9 to Nuevo Dispositivo
> CREATED OUTPUT PORT 10:out 8 for device 12
> Creating device 12 in Play mode -- no connection available
> Default device name for this device is Anonymous MIDI device 1
> Renaming device 12 to Nuevo Dispositivo
> Renamed 128:10 to Nuevo Dispositivo
> SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
> type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
> 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
> 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
> 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
> device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
> (write)" recording = 0
> SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "Soft synth connection" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "Audio connection" recording = 0
> SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> rosegarden: could not connect to socket
> rosegarden: No such file or directory
> SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
> type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
> 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
> 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
> 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
> device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
> (write)" recording = 0
> SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "Soft synth connection" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "Audio connection" recording = 0
> SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> AlsaDriver::setRecordDevice - successfully subscribed device 9 as record
> port
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 1
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
> AudioPlayQueue::~AudioPlayQueue()
> JackDriver::stopTransport: resetting m_haveAsyncAudioEvent
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
>
> ALSA Client information:
>
> 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX)
> [ctype 2,
> ptype 2, cap 99]
> 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART))
> (DUPLEX)
> [ctype 2, ptype 2, cap 127]
> 16,32 - (Audigy MPU-401 #2, Audigy MPU-401
> #2) (DUPLEX) [ctype
> 2, ptype 2, cap 127]
> 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
>
> SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
> type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
> 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
> 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
> 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
> device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
> (write)" recording = 0
> SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
> record port
> AudioPlayQueue::~AudioPlayQueue()
> Disconnecting my port 3 from 16:0 on reconnection
> Connecting my port 3 to 17:0 on reconnection
> SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
> type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
> 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
> 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
> 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
> device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
> (write)" recording = 0
> SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
> record port
> X Error: BadWindow (invalid Window parameter) 3
> Major opcode: 20
> Minor opcode: 0
> Resource id: 0x1400727
>
> ALSA Client information:
>
> 14,0 - (Midi Through, Midi Through Port-0) (DUPLEX)
> [ctype 2,
> ptype 2, cap 99]
> 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART))
> (DUPLEX)
> [ctype 2, ptype 2, cap 127]
> 16,32 - (Audigy MPU-401 #2, Audigy MPU-401
> #2) (DUPLEX) [ctype
> 2, ptype 2, cap 127]
> 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
> 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY)
> [ctype 2,
> ptype 2078, cap 66]
>
> SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
> type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
> type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
> 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
> (duplex)" recording = 0
> SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
> type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
> recording = 0
> SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
> 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
> recording = 0
> SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
> 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
> recording = 0
> SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
> device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
> (write)" recording = 0
> SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
> recording = 0
> SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
> type = 0 direction = 1 connection = "" recording = 0
> SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
> direction = 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
> 0 connection = "" recording = 0
> SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
> type = 0 direction = 0 connection = "" recording = 0
> AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
> record port
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 3
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
> AudioPlayQueue::~AudioPlayQueue()
> JackDriver::stopTransport: resetting m_haveAsyncAudioEvent
> RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
> Launched ok, pid = 11581
> OggS-SEEK: at 0 want 78328 got 68160 (diff-requested 78328)
> OggS-SEEK: at 78400 want 520 got 0 (diff-requested -77880)
> AudioPlayQueue::~AudioPlayQueue()
> Warning: Composition::~Composition() with 2 observers still extant
> Observers are: 0x89f9758 0x8e651c8
> subgraph starting at rosegarden timed out (subgraph_wait_fd=7, status
> = 0, state = Triggered)
>
>
> **** alsa_pcm: xrun of at least 453.013 msecs
>
> TERM environment variable not set.
> cat: /proc/isapnp: No existe el fichero o el directorio
> _________________________________________
> Linux Musix 2.6.16-beyond4.1 #1 PREEMPT Sun May 28 09:01:14 EEST 2006
> i686 GNU/Linux
> ___________opciones de inicio del kernel:________________
> root=/dev/hdb8 ro dma ramdisk_size=100000 init=/etc/init lang=es
> apm=power-off nomce quiet alsa dma vga=normal
>
> _______________________________________________
> Musix GNU+Linux - www.musix.org.ar
> Musix-usuarios mailing list
> Musix-usuarios en lists.ourproject.org
> https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
>
--
____________________________________
Um abraço. Jorge Salgueiro
.................................................................
Use GNU/Linux: free culture for a free society
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: /pipermail/musix-usuarios/attachments/20060703/cc83b5c3/attachment.htm
Más información sobre la lista de distribución Musix-usuarios