[Bdi4emc-help] configuring ini file

Mon Dec 4 00:38:18 CET 2006

Hi Alex

On Sunday 03 December 2006 21:18, alex wrote:
> I need to have 3 axes homed.
> Is it possible with present setup?

Yes, you can have all three homed. Each axis will need to be homed separately 
and moved off the home switch before the next can be homed. If one axis is 
not fitted with a home switch, then the postition would need to be zero'd 
manually each time you power the system up as EMC wouldn't have a fixed 
reference point to work from.

Regards, Paul.