Perdón, me quedé sin ganchitos en la abrochadora.... Martin Carr escribió:
El neto dragon es un buen modem, podés bajar los drivers de acá http://linmodems.technion.ac.il/packages/smartlink/slmdm-2.7.10_debug.tar.gz
Descomprimí el archivo desde consola con
tar -xzf slmdm-2.7.10_debug.tar.gz después entrá y leé el README (la verdad es que no me acuerdo exactamente los pasos para la configuración, pero fué muy facil las veces que lo hice)
El HSP56 MR también lo podés configurar, pero no estoy seguro cuál es el driver, buscalo en
Nos vemos!
Ayer a la noche bajé el slmdm-2.7.10_debug.tar.gz y lo compilé (así se dice cuando ejecutás make?) y me tiró una serie de errores que ni idea de cómo solucionarlos, pero esta mañana buscando en el google vi que el 2.7.10 es para kernel 2.4 mientras que hay un slmdm-2.9.6_debug.tar.gz que es para kernel 2.6 que es el que me pasó Daniel, así que lo bajé e intenté seguir los pasos sugeridos en el readme, pero me tira errores de directorios que no encuentra... Adjunto el readme por si a alguin le sirve para ubicarse. Un abrazo. -- Gustavo Pardo CENTENARIO Soluciones Digitales Tel.: (0299) 489-6880 Centenario - Neuquén - Argentina http://www.centenariosd.com.ar [email protected] Smart Link Ltd. http://www.smlink.com Sep 30, 2003 Smart Link Soft Modem for Linux ------------------------------- Introduction ============ This is Smart Link Soft Modem for Linux version 2.9. It provides full-featured 56K Voice Fax Modem. This is implemented as generic application (slmodemd) and set of hardware specific kernel-space drivers (slamr, slusb). Features ======== Modem: V.92, V.90, V.34, V.32bis, V.23, V.22, V.21, Bell 103/212. Flow control: V.42, MNP 2-4. Compression: V.44, V.42bis, MNP5. Fax: Class 1. Voice: ADPCM voice compression, Digital Answering Machine. Multiple modems are supported. Supported Hardware ================== HAMR5600 based AMR/CNR/MDC/ACR modem cards on the following Southbridge chips: - Intel ICH0,ICH2, ICH3, ICH4 - Via 686A, 686B, 8231, 8233 - SiS 630 - ALI 1535. SmartPCI56/561/562/563 based PCI modem cards. SmartUSB56 based USB modem. Requirements ============ CPU: Intel Pentium II, Celron. AMD K6, Cyrix 500MHz or higher. Memory: 64MB. OS: Linux 2.4. You need the kernel header files at least (or full kernel source tree) installed and configured. Linux 2.6. You need the full kernel source tree installed and configured. Note: Most Linux Distributions have 'ready to use' kernel source package - be sure that this is installed. Installation ============ 1. Unpack tar.gz package file: $ gzip -dc slmodem-2.9.X.tar.gz | tar xf - 2. 'cd' to package directory: $ cd slmodem-2.9.X 3. Review and edit 'Makefile' (if need): In many cases you will need to correct path to your local kernel source tree: KERNEL_DIR=/path/to/linux Default KERNEL_DIR is '/lib/modules/<kerne-version>/build'. Many Linux Distributions use directory '/usr/src/linux-<version>' also. Note: If you are using Linux kernel 2.4, only header files should be available for build in $(KERNEL_DIR)/include Another way to pass right value KERNEL_DIR is to use command line parameter while running 'make': $ make KERNEL_DIR=/path/to/linux ... 4. Run 'make' command to compile package: $ make 5. Install. As 'root' user run: # make install It will install: - application 'slmodemd' under '/usr/sbin' directory - hardware specific drivers (kernel modules) 'slamr' and 'slusb' under conventional kernel modules directory - character device nodes '/dev/slamr0-3' with major number 212 (for pci modems) and '/dev/slusb0-3' with major number 213 (for usb modems). - config modules for autoloading (by editing file '/etc/modules.conf') (only with 2.4 kernels) 6. Config modem country. Use AT+GCI=<T.35 country code> command to setup country. Also you can setup default modem country by passing command line parameter '--country=MY_COUNTRY' to program 'slmodemd' (also see 'slmodemd --help'). Note: Command ATI7 shows currently installed country setting. 8. Uninstallation. In package directory just type: # make uninstall Getting Started =============== After successful installation and configuration: 1. Load modem driver. Load your modem hardware specific kernel module: # modprobe slamr if you are using AMR/CNR/PCI modem, or # modprobe slusb if you are using SmartUSB56 Modem. Note: this will be done automatically when modules were configured for 'loading on demand' Note: this is safe to load both 'alamr' and 'slusb' modules. 2. Run soft modem application. # /usr/sbin/slmodemd [options] <device_name> Where device name is appropriate device node for your modem (look at output of 'dmesg' command). Run '/usr/sbin/slmodemd --help' for details. Examples: # /usr/sbin/slmodemd --country=USA /dev/slamr0 , or for SmartUSB56 Modems: # /usr/sbin/slmodemd --country=ITALY /dev/slusb0 3. Using the modem. When 'slmodemd' is running this creates PTY (pseudo-terminal) to emulate modem port device, also this creates symbolic link like '/dev/ttySL0' (shown at startup). Config your application to use this link '/dev/ttySL0' (or PTY node itself) as modem port. Note: Some application want 'to know' that they are working with pseudo-terminal and may require additional configurations. Known application notes: - 'wvdial' requires option 'Carrier Check = no' in config file ALSA mode (2.6 kernel only) ========= Notes: Only ICH based AC97 modems are currently supported. 'intel8x0m' modem driver was included in main ALSA tree and available in alsa-driver-1.0.2. Kernel patch was generated with 2.6.1 (hopefully may works with other 2.6 versions). 1. Apply patch 'patches/alsa-linux-2.6.0.patch' to your kernel source: $ cd <kernel-source-dir> $ patch -p1 < /path/to/where/slmodem-2.9.x/patches/alsa-linux-2.6.0.patch 2. Configure your kernel and enable ALSA and ICH based modem support ( 'Device Drivers' -> 'Sound' -> 'Advanced Linux Sound Architecture' -> 'PCI devices' -> 'Intel i8x0/MX440; AMD768/8111 modems' ) . 3. Build and install kernel and modules as usual (make , make modules_install, etc.). ICH modem driver modem module name is 'snd-intel8x0m' (if was configured as module). 4. Build application 'slmodemd' with ALSA support. For this in slmodem-2.9.x dir: $ cd modem $ make SUPPORT_ALSA=1 This will build 'slmodemd' with ALSA support. If compilation is failed review Makefile (near ALSA_SUPPORT condition) and define right library and/or CFLAGS 5. Use option '--alsa' when running 'slmodemd' and ALSA conventional device name ('hw:0' or 'hw:1' for instance). If modem support in the kernel was enabled as module module 'snd-intel8x0m' should be loaded. When using ALSA modem driver you don't need to load other modules ('slamr'). Troubleshooting =============== If you get an error message during installation/configuration or loading the modules try to see it in FAQ file. Please report the problem to your modem provider or to us ([email protected]). Feedback ======== Please send any feedbacks to Smart Link. See the Smart Link web site for contact information (www.smlink.com) or to [email protected].