2006/7/3, Rodolfo Lopez <[email protected]>:
Saludos.
He probado algunos scripts de musix en opensuse 64bits (soy travieso), y funcionan bien. Convertir midi a audio, y otros. El problema es que opensuse no es para músicos, y algunos programas debo instalarlos a pie. Lógico.
Reportes: Probando musix 0.49:
Tengo el mismo problema de reconociemiento de impresoras: cupsys no está trabajando bien en la instalación tipo debian o knoppix. Marcos dice que esto es muy complejo, pero creo que debo reportarlo de nuevo. Instalé igual que el disco live y la impresora sí corre bien. Ahora el modem no se bloquea.
Rosegarden no da el aviso de System timer resolution is too low.
Cambio y fuera...
como se cambia? *************
PCINFO:
CPU0 0: 2928289 IO-APIC-edge timer 1: 1790 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 5 IO-APIC-edge rtc 12: 118863 IO-APIC-edge i8042 14: 34425 IO-APIC-edge ide0 15: 24 IO-APIC-edge ide1 16: 4 IO-APIC-level ohci1394 17: 102490 IO-APIC-level bttv0 19: 29918 IO-APIC-level EMU10K1 21: 210499 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5 NMI: 0 LOC: 2928131 ERR: 0 MIS: 0 _________________________________________ CPUINFO processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 12 model name : AMD Athlon(tm) 64 Processor 3200+ stepping : 0 cpu MHz : 2200.139 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow lahf_lm ts fid vid ttp bogomips : 4405.78
_________________________________________ snd-page-alloc pages : 58101760 bytes (14185 pages per 4kB) _________________________________________ MEMINFO
_________________________________________
Placas de sonido reconocidas por el sistema _________________________________________
cat /proc/asound/cards 0 [Audigy2 ]: Audigy2 - Audigy 2 Platinum [SB0240P] Audigy 2 Platinum [SB0240P] (rev.4, serial:0x10021102) at 0xe800, irq 19 cat /proc/isapnp >>/tmp/pcinfo.txt _________________________________________ HWSETUP --- class: OTHER bus: PCI device: (null) driver: unknown desc: Advanced Micro Devices [AMD]|K8 NorthBridge --- class: OTHER bus: PCI device: (null) driver: unknown desc: Advanced Micro Devices [AMD]|K8 NorthBridge --- class: OTHER bus: PCI device: (null) driver: unknown desc: Advanced Micro Devices [AMD]|K8 NorthBridge --- class: OTHER bus: PCI device: (null) driver: unknown desc: Advanced Micro Devices [AMD]|K8 NorthBridge --- class: OTHER bus: PCI device: (null) driver: i2c-viapro desc: Unknown vendor|Generic i2c-viapro device --- class: OTHER bus: PCI device: (null) driver: pata_via desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE --- class: OTHER bus: PCI device: (null) driver: emu10k1-gp desc: Creative Labs|SB Audigy MIDI/Game port --- class: OTHER bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: OTHER bus: PCI device: (null) driver: unknown desc: VIA Technologies|unknown device 1106:b188 --- class: OTHER bus: USB device: (null) driver: unknown desc: 600DPI USB Scanner --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 ehci_hcd EHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller --- class: OTHER bus: PCI device: (null) driver: unknown desc: VIA Technologies|unknown device 1106:3188 --- class: OTHER bus: USB device: (null) driver: unknown desc: unknown --- class: NETWORK bus: PCI device: eth driver: r8169 desc: Realtek|RTL-8169 write config(/etc/sysconfig/netcard) update config(/etc/sysconfig/knoppix) --- class: MOUSE bus: PSAUX device: psaux driver: msintellips/2 desc: Generic PS/2 Wheel Mouse write config(/etc/sysconfig/mouse) update config(/etc/sysconfig/knoppix) symlink(/dev/psaux,/dev/mouse) --- class: AUDIO bus: PCI device: (null) driver: emu10k1 desc: Creative Labs|SB Audigy write config(/etc/sysconfig/sound) update config(/etc/sysconfig/knoppix) --- class: CDROM bus: IDE device: hdc driver: ignore desc: HL-DT-ST DVDRAM GSA-4040B symlink(/dev/hdc,/dev/cdrom) --- class: CDROM bus: IDE device: hdd driver: ignore desc: LITE-ON DVDRW SHW-160P6S symlink(/dev/hdd,/dev/cdrom1) --- class: VIDEO bus: PCI device: (null) driver: Server:XFree86(nv) desc: Vanta [NV6] write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: FLOPPY bus: UNKNOWN device: fd0 driver: unknown desc: 3.5" 1.44MB floppy drive write config(/etc/sysconfig/floppy) update config(/etc/sysconfig/knoppix) --- class: HD bus: IDE device: hda driver: ignore desc: ST380011A --- class: HD bus: IDE device: hdb driver: ignore desc: ST3120022A --- class: PRINTER bus: USB device: (null) driver: unknown desc: Seiko Epson Corp. Stylus Printer --- class: CAPTURE bus: PCI device: (null) driver: bttv desc: Brooktree Corporation|Bt878 --- class: USB bus: PCI device: (null) driver: ehci-hcd desc: VIA Technologies|USB 2.0 --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: USB bus: PCI device: (null) driver: usb-uhci desc: VIA Technologies|USB --- class: UNKNOWN bus: PCI device: (null) driver: ohci1394 desc: Unknown vendor|unknown device 1102:4001 _________________________________________ ESPACIO_USADO_LIBRE S.ficheros Tamaño Usado Disp Uso% Montado en /dev/hdb8 8,9G 1,7G 7,2G 20% / tmpfs 506M 0 506M 0% /dev/shm _________________________________________ Modulos ALSA cargados snd_rtctimer 3468 0 snd_emu10k1_synth 6656 0 snd_emux_synth 31616 1 snd_emu10k1_synth snd_seq_virmidi 6912 1 snd_emux_synth snd_seq_midi_emul 5888 1 snd_emux_synth snd_seq_dummy 3844 0 snd_seq_oss 30052 0 snd_seq_midi 8096 0 snd_seq_midi_event 6912 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 45644 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 103588 5 snd_emu10k1_synth snd_rawmidi 22944 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_ac97_codec 83360 1 snd_emu10k1 snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 36512 0 snd_mixer_oss 16512 1 snd_pcm_oss snd_pcm 75656 5 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 8076 8
snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_timer 21124 4 snd_rtctimer,snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 9608 2 snd_emu10k1,snd_pcm snd_util_mem 4608 2 snd_emux_synth,snd_emu10k1 snd_hwdep 8836 2 snd_emux_synth,snd_emu10k1 snd 49024 21
snd_rtctimer,snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep soundcore 9312 3 emu10k1,sound,snd _________________________________________ Modulos OSS cargados sound 70416 1 emu10k1 soundcore 9312 3 emu10k1,sound,snd _________________________________________ ________________VIDEO______________________ ________________Xorg________________________ Section "ServerLayout" Identifier "Xorg Configurado" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" # PS/2 Mouse using /dev/input/mice in Kernel 2.6 # Serial Mouse not detected InputDevice "USB Mouse" "CorePointer" EndSection
Section "ServerFlags" Option "AllowMouseOpenFail" "true"
EndSection
Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection
Section "Module" Load "ddc" # ddc probing of monitor Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection
Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" #otras opciones para layout pueden ser "es" (, teclado latinoamericano estandar Ñ en los :, ' genera acentos...) #"us_intl" (' genera acentos, META+5 ->euro, etc). #us: teclado windoze estandar, WIN_L/R -> Super_L/R (Mod 4). [Alt_L/R -> Alt y Meta]_L/R (Mod 1) Option "XkbLayout" "es"
EndSection
Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection
Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection
Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" VendorName "KDS" ModelName "KDS1745" HorizSync 30 - 70 # DDC-probed VertRefresh 50 - 160 # DDC-probed # These are the DDC-probed settings reported by your monitor. # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00 ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03 ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06 ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00 ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32 ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01 ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94 ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +HSync EndSection
Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "nv" VendorName "All" BoardName "All" # BusID "PCI:1:0:0" EndSection
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection
Section "DRI" Mode 0666 EndSection _________________________________________ ______________errores de video________________ Xsession: X session started for root at dom jul 2 07:29:05 CEST 2006 Configurando el teclado en Entorno Gráfico en español menu "Texto-Oficina" folder { menu "Oficina" folder { IceWM: using /root/.icewm for private configuration files icewmtray: using /root/.icewm for private configuration files DCOPClient::attachInternal. Attach failed Could not open network socket DCOPClient::attachInternal. Attach failed Could not open network socket sox: Can't open output file '/dev/dsp': No such device IceWM: Atención: Deprecated option: warpPointer == true IceWM: Atención: Deprecated option: showPopupsAbovePointer == true IceWM: Atención: Deprecated option: sizeMaximized == true IceWM: Opción de ventana desconocida: onTop IceWM: Atención: Deprecated option: "ignoreWinlist windowoption" kbuildsycoca running... IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/jack-rack.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/jack-rack.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error en la carga de la imagen "/usr/share/pixmaps/jack-rack.xpm" This is xawtv-3.94, running on Linux/i686 (2.6.16-beyond4.1)
This is xdtv 2.3.2 running on Linux/i686 (2.6.16-beyond4.1). scandir: No existe el fichero o el directorio filename = /root/.xdtv/xdtvrc /root/.xdtv/xdtvrc:14: invalid value for fullscreen_mode: old WARNING: xdtv_v4l-conf is compiled without DGA support. wmhooks: netwm detected wmhooks: netwm state above supported wmhooks: netwm fullscreen supported wmhooks: gnome detected Selected XvImage adaptor with yuyv support: NV Video Blitter on port 65 (grabdisplay) No XvVideo port available. *** AUDIO DEVICE TYPE = alsa *** GRABBER DEVICE TYPE = v4l2 *** MIXER DEVICE TYPE = alsa MMX, SSE, AMD MMX extensions, SSE2, 3DNOW, have been detected. Method sse IceWM: APP BUG? mapRequest for window 8013CB sent to destroyed frame 1400184! libkonq: WARNING: Could not load wallpaper
/root/.kde/share/apps/kthememanager/themes/Musix/wallpapers/konqueror/kde4ever.png kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle '/etc/samba/smb.conf' kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle '/etc/security/fileshare.conf' kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle '/etc/exports' sending IMStart with 0 chars to 0x81441a8 sending IMEnd with 1 chars to 0x81441a8, text=á sending IMStart with 0 chars to 0x81441a8 sending IMEnd with 1 chars to 0x81441a8, text=é sending IMStart with 0 chars to 0x81441a8 sending IMEnd with 1 chars to 0x81441a8, text=ó Opener: received SetSecret Opener: received SetSecret Opener: received OpenLock
Opener: received OpenDevice Opener: received ExecPPPDaemon In parent: pppd pid 11321 Couldn't find interface ppp0: No existe tal dispositivo Kernel supports ppp alright. Couldn't find interface ppp0: No existe tal dispositivo Couldn't find interface ppp0: No existe tal dispositivo Couldn't find interface ppp0: No existe tal dispositivo Opener: received OpenResolv Opener: received RemoveSecret Opener: received RemoveSecret Extension System Warning: Failed to set up default extensions files probably because you do not have write privileges to this location. While you can run Firefox like this, it is recommended that you run it at least once with privileges that allow it to generate these initial files to improve start performance. Running from a disk image on MacOS X is not recommended.Opener: received KillPPPDaemon In killpppd(): Sending SIGTERM to 11321 Opener: received RemoveSecret Opener: received RemoveSecret Opener: received OpenResolv Opener: received OpenResolv Opener: received RemoveLock jackd 0.101.1 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support. loading driver .. apparent rate = 44100 creating alsa driver ... hw|hw|2048|2|44100|0|0|nomon|swmeter|-|32bit configuring for 44100Hz, period = 2048 frames, buffer = 2 periods Note: audio device hw doesn't support a 32bit sample format so JACK will try a 24bit format instead Note: audio device hw doesn't support a 24bit sample format so JACK will try a 16bit format instead nperiods = 2 for capture Note: audio device hw doesn't support a 32bit sample format so JACK will try a 24bit format instead Note: audio device hw doesn't support a 24bit sample format so JACK will try a 16bit format instead nperiods = 2 for playback PluginFactory::instance(dssi): creating new DSSIPluginFactory [/root/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi] WARNING: DSSIPluginFactory::discoverPlugins: couldn't dlopen /usr/lib/dssi/fluidsynth-dssi.so - libjack-0.80.0.so.0: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio PluginFactory::instance(ladspa): creating new LADSPAPluginFactory [/root/.ladspa] [/usr/local/lib/ladspa] [/usr/lib/ladspa] Rosegarden 4-1.2.3 - AlsaDriver - alsa-lib version 1.0.10
JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 2048 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 2 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "alsa_pcm:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "alsa_pcm:playback_2" JackDriver::initialiseAudio - found 2 JACK physical inputs JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to "rosegarden:record in 1 L" JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to "rosegarden:record in 1 R" JackDriver::initialiseAudio - initialised JACK audio subsystem
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 2, cap 99] 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 2, cap 127] 16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype 2, ptype 2, cap 127] 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
CREATED OUTPUT PORT 3:out 1 - MIDI output system device for device 0 Connecting my port 3 to 16:0 on initialisation done Creating device 0 in Play mode for connection 16:0 Audigy MPU-401 (UART) (duplex) Default device name for this device is MIDI output system device Creating device 1 in Record mode for connection 16:0 Audigy MPU-401 (UART) (duplex) Default device name for this device is MIDI input system device CREATED OUTPUT PORT 4:out 2 - MIDI output system device 2 for device 2 Connecting my port 4 to 16:32 on initialisation done Creating device 2 in Play mode for connection 16:32 Audigy MPU-401 #2 (duplex) Default device name for this device is MIDI output system device 2 Creating device 3 in Record mode for connection 16:32 Audigy MPU-401 #2 (duplex) Default device name for this device is MIDI input system device 2 CREATED OUTPUT PORT 5:out 3 - MIDI output system device 3 for device 4 Connecting my port 5 to 17:0 on initialisation done Creating device 4 in Play mode for connection 17:0 Emu10k1 Port 0 (write) Default device name for this device is MIDI output system device 3 CREATED OUTPUT PORT 6:out 4 - MIDI output system device 4 for device 5 Connecting my port 6 to 17:1 on initialisation done Creating device 5 in Play mode for connection 17:1 Emu10k1 Port 1 (write) Default device name for this device is MIDI output system device 4 CREATED OUTPUT PORT 7:out 5 - MIDI output system device 5 for device 6 Connecting my port 7 to 17:2 on initialisation done Creating device 6 in Play mode for connection 17:2 Emu10k1 Port 2 (write) Default device name for this device is MIDI output system device 5 CREATED OUTPUT PORT 8:out 6 - MIDI output system device 6 for device 7 Connecting my port 8 to 17:3 on initialisation done Creating device 7 in Play mode for connection 17:3 Emu10k1 Port 3 (write) Default device name for this device is MIDI output system device 6 CREATED OUTPUT PORT 9:out 7 - MIDI output system device 7 for device 8 done Creating device 8 in Play mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device 7 Creating device 9 in Record mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device 3 AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks AlsaDriver::initialiseMidi - initialised MIDI subsystem
AlsaDriver::setCurrentTimer((auto)) Current timer set to "system timer" with timer checks SoundDriver::getMappedDevice(0) - name = "MIDI output system device" type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "MIDI output system device 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "MIDI output system device 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "MIDI output system device 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "MIDI output system device 5" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "MIDI output system device 6" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "MIDI output system device 7" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "Soft synth connection" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "Audio connection" recording = 0 Renaming device 0 to General MIDI Device Renaming device 2 to MIDI soundcard synth 2 Renaming device 4 to MIDI soundcard synth 3 Renaming device 5 to MIDI soundcard synth 4 Renaming device 6 to MIDI external device Renaming device 7 to Nuevo Dispositivo Renaming device 8 to Nuevo Dispositivo AlsaDriver::setPlausibleConnection: connection like 65:0 Emu10k1 Port 0 (write) requested for device 0 AlsaDriver::setPlausibleConnection: nothing suitable available Renamed 128:3 to General MIDI Device AlsaDriver::setPlausibleConnection: connection like 65:1 Emu10k1 Port 1 (write) requested for device 2 AlsaDriver::setPlausibleConnection: nothing suitable available Renamed 128:4 to MIDI soundcard synth 2 AlsaDriver::setPlausibleConnection: connection like 65:2 Emu10k1 Port 2 (write) requested for device 4 AlsaDriver::setPlausibleConnection: nothing suitable available Renamed 128:5 to MIDI soundcard synth 3 AlsaDriver::setPlausibleConnection: connection like 65:3 Emu10k1 Port 3 (write) requested for device 5 AlsaDriver::setPlausibleConnection: nothing suitable available Renamed 128:6 to MIDI soundcard synth 4 AlsaDriver::setPlausibleConnection: connection like 64:0 EMU10K1 MPU-401 (UART) (duplex) requested for device 6 AlsaDriver::setPlausibleConnection: nothing suitable available Renamed 128:7 to MIDI external device Renamed 128:8 to Nuevo Dispositivo Renamed 128:9 to Nuevo Dispositivo CREATED OUTPUT PORT 10:out 8 for device 12 Creating device 12 in Play mode -- no connection available Default device name for this device is Anonymous MIDI device 1 Renaming device 12 to Nuevo Dispositivo Renamed 128:10 to Nuevo Dispositivo SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device" type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "Soft synth connection" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "Audio connection" recording = 0 SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 rosegarden: could not connect to socket rosegarden: No such file or directory SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device" type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "Soft synth connection" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "Audio connection" recording = 0 SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 AlsaDriver::setRecordDevice - successfully subscribed device 9 as record port RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 1 RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2 RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2 AudioPlayQueue::~AudioPlayQueue() JackDriver::stopTransport: resetting m_haveAsyncAudioEvent RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 2, cap 99] 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 2, cap 127] 16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype 2, ptype 2, cap 127] 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device" type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as record port AudioPlayQueue::~AudioPlayQueue() Disconnecting my port 3 from 16:0 on reconnection Connecting my port 3 to 17:0 on reconnection SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as record port X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x1400727
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 2, cap 99] 16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 2, cap 127] 16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype 2, ptype 2, cap 127] 17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 2078, cap 66] 17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(1) - name = "MIDI input system device" type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART) (duplex)" recording = 0 SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth 2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2" type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)" recording = 0 SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth 3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)" recording = 0 SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth 4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)" recording = 0 SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)" recording = 0 SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo" type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)" recording = 0 SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3" type = 0 direction = 1 connection = "" recording = 0 SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction = 0 connection = "" recording = 0 SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo" type = 0 direction = 0 connection = "" recording = 0 AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as record port RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 3 RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4 RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4 AudioPlayQueue::~AudioPlayQueue() JackDriver::stopTransport: resetting m_haveAsyncAudioEvent RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4 Launched ok, pid = 11581 OggS-SEEK: at 0 want 78328 got 68160 (diff-requested 78328) OggS-SEEK: at 78400 want 520 got 0 (diff-requested -77880) AudioPlayQueue::~AudioPlayQueue() Warning: Composition::~Composition() with 2 observers still extant Observers are: 0x89f9758 0x8e651c8 subgraph starting at rosegarden timed out (subgraph_wait_fd=7, status = 0, state = Triggered)
**** alsa_pcm: xrun of at least 453.013 msecs
TERM environment variable not set. cat: /proc/isapnp: No existe el fichero o el directorio _________________________________________ Linux Musix 2.6.16-beyond4.1 #1 PREEMPT Sun May 28 09:01:14 EEST 2006 i686 GNU/Linux ___________opciones de inicio del kernel:________________ root=/dev/hdb8 ro dma ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce quiet alsa dma vga=normal
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
-- ____________________________________ Um abraço. Jorge Salgueiro ................................................................. Use GNU/Linux: free culture for a free society