December 2007 - Musix-usuarios - lists.ourproject.org

animación synfig
by victor 31 Dec '07

31 Dec '07

Al parecer esta pequeña animación, usa synfig, cinelerra, audacity y hydrogen http://www.hoodyhoo.com/toons/syNfig01_final.ogg Lento, pero avanzando... feliz año a todos

3 2

Re: [Musix-users] BEHRINGER UCG102
by Marcos Guglielmetti 31 Dec '07

31 Dec '07

2007/12/30, Sean Edwards <cybersean3000(a)yahoo.com>: > > Jack problem is solved: > > > > First, the UCG102 digital conversion is only 16 bits. Secondly, it > > only samples at 3 rates - 32kHz, 44.1kHz and 48kHz. So I set Jackctl > > to 16 bit and 44.1. Still no success. > > > > I then abandoned Jackctl and went to jackd at the command line, and set > > the Frames/Period to 1024, and it crashed. Finlally, I increased > > Frames/Period to 2048 and jackd was running. > And... is it usable at such latency? > > With jackd stable from the command line, I started Jackcontrol, and > > jack remained stable. Next, it was time to test some applications. > > > > Both Ecamegapedal and Jackrack connected to jackd, applied effect > > treatments to my guitar, and produced sound through the headphones and > > recorded tracks to audacity. > > > > The short story is the Behringer UCG102 works with Jack, but may > require some tweaking. > Fine! Updated: http://www.musix.org.ar/wiki/index.php?title=Compatible-Audio#BEHRINGER_UCG… How about changing the periods/buffers? Regards > > -=cybersean=- > > > > ----- Original Message ---- > From: Sean Edwards <cybersean3000(a)yahoo.com> > To: Musix GNU+Linux users list <musix-users(a)lists.ourproject.org> > Sent: Saturday, December 29, 2007 1:25:57 PM > Subject: Re: [Musix-users] BEHRINGER UCG102 > > > I tried many combinations, but I will try again later tonight and post > my results. > > -=cybersean=- > > > > > > > ____________________________________________________________________________________ > Looking for last minute shopping deals? > Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > _______________________________________________ > Musix GNU+Linux - www.musix.org.ar > Musix-users mailing list > Musix-users(a)lists.ourproject.org > https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users > -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

2 2

Re: [M-Colab] R3 test3 siiiii se instaló!! SOLUCIONADOOOOOOOOOOO
by Marcos Guglielmetti 30 Dec '07

30 Dec '07

Gracias Martín Carr, Daniel VLC, Gilberto y todos aquellos que colaboraron en este proceso de búsqueda del error de instalación en discos sata de la versión Musix 1-0 R3 testx El problema estaba en que, estando el instalador haciendo tareas en la partición de destino, no creaba nodos para los discos sata: /dev/sd* , entonces las herramientas como fdisk -l y por lo tanto scanpartitions y rebuildfstab no funcionaban. Al tener una PC acá en Junín con discos SATA disponible todo el tiempo para testear, pude debuguearlo: sólo necesitaba eso, la ayuda de los colaboradores, y unas horas frente a una PC con discos SATA, pensar que hace 3 meses que estamos con esto... por dios... en fin, trataré de hacer HOY mismo una imagen de CD y subirla al server, luego saldrá el Live-DVD!! (sé que no hay que cantar victoria antes de ganar, pero quería terminar este 2007 con este problema del demonio solucionado, y ahora remasterizaré y testearé, por ahora funcionó bien!!!) Detalles, debajo: DEBUGUEANDO /usr/share/knoppix-installer/modules/install/01-fstab.bm Agregado el root a fstab en caso de que sea reiserfs ¿cómo se ve /tmp/hdinstall/etc/fstab cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 listo ¿cómo se ve /tmp/hdinstall/etc/fstab ; ahora agregará los swap # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 Agregados genericamente floppy, proc, sys y shm ¿cómo se ve /tmp/hdinstall/etc/fstab cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 agregados cdrom y dvd ¿cómo se ve /tmp/hdinstall/etc/fstab cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 ### como hace un for i in /dev/cdrom* /dev/dvd , va agregando de una lista cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/dvd /dvd iso9660 defaults,ro,users,noexec,noauto 0 0 Ha intentado agregar links a la carpeta mnt, copiandolos ¿cómo se ve /tmp/hdinstall/mnt/ ls /tmp/hdinstall/mnt/ auto cdrom floppy hda test Eso NO falló, es esto: # copy automounter links for i in /mnt/* do [ -L $i ] && cp -a $i $TARGET_MNT_POINT/mnt/ dado que existen otras carpetas en mnt ls /mnt hda sda1 sda2 sda4 sda5 Pero la única que es un link es hda, las otras son carpetas no linkeadas. Bien. Let Knoppix detect all other partitions Ey!!, veamos cómo está /tmp/hdinstall/etc/fstab y qué hace chroot /tmp/hdinstall rebuildfstab -r OJO: que luego ahora desmonta proc... no sé por que... cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/dvd /dvd iso9660 defaults,ro,users,noexec,noauto 0 0 # Added by KNOPPIX noauto,users,exec 0 0 ### ### AQUI ES DONDE FALLÓ . BIEN, VAMOS a meternos como root allí en la partición de destino chroot /tmp/hdinstall root@Musix:/# ls mnt auto cdrom floppy hda test root@Musix:/# rebuildfstab -v Escaneando nuevos discos duros/particones... Añadiendo 1 nuevas particiones a /etc/fstab. lo que añadió estaba mal: # Added by KNOPPIX noauto,users,exec 0 0 A ver qué pasa? root@Musix:/# scanpartitions root@Musix:/# scanpartitions mount /sys on /sys type sysfs (rw) /dev on /mnt/hda2/dev type none (rw,bind) capifs on /dev/capi type capifs (rw,mode=0666) capifs on /dev/capi type capifs (rw,mode=0666) devpts on /dev/pts type devpts (rw) fdisk -l Es raro esto... antes de hacer todo eso, el script 01-fstab-bm monta bien a proc, se ve: /proc on /ramdisk/tmp/hdinstall/proc type none (rw,bind) Entonces no se entiende por qué fdisk -l no da respuestas YA SÉ POR QUÉ: porque no existe un nodo en /dev para sda !!! fdisk -l -u /dev/sda root@Musix:/# ls /dev/hd hda hda1 hda2 hda3 hda4 hdb hdb2 hdb3 hdb4 hdb5 hdb6 hdb7 hdb8 hdc root@Musix:/# ls /dev/hd hda hda1 hda2 hda3 hda4 hdb hdb2 hdb3 hdb4 hdb5 hdb6 hdb7 hdb8 hdc root@Musix:/# ls /dev/hda /dev/hda root@Musix:/# fdisk -l -u /dev/hda Nota: el tamaño del sector es 2048 (no 512) Disco /dev/hda: 734 MB, 734281728 bytes 255 cabezas, 63 sectores/pista, 22 cilindros, 358536 sectores en total Unidades = sectores de 1 * 2048 = 2048 bytes sí existe por ejemplo para hd*, pero ninguno para sd*... quizá haciendo ese nodo ya la cosa se solucione http://fy.chalmers.se/~appro/linux/HOWTO-mirror-root.html http://www.linux-cd.com.ar/cgi-bin/yabb/YaBB.cgi?num=1187089025/0 root@Musix:/# mknod /dev/sda mknod: missing operand after «/dev/sda» Pruebe `mknod --help' para más información. root@Musix:/# mknod /dev/sda b 8 0 root@Musix:/# fdisk -l Disco /dev/sda: 120.0 GB, 120034123776 bytes 255 cabezas, 63 sectores/pista, 14593 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes Disposit. Inicio Comienzo Fin Bloques Id Sistema /dev/sda1 * 1 11340 91083361 7 HPFS/NTFS /dev/sda2 11341 12488 9221310 83 Linux /dev/sda3 12489 13889 11253532+ 5 Extendida /dev/sda4 13890 14593 5654880 7 HPFS/NTFS /dev/sda5 12489 13766 10265503+ 83 Linux /dev/sda6 13767 13889 987966 82 Linux swap / Solaris ANDUVO!! Pero ojo que scanpartitions devuelve sólo la sda scanpartitions /dev/sda /mnt/sda ntfs A ver si creo los otros nodos mknod /dev/sda b 8 0 mknod /dev/sda1 b 8 1 mknod /dev/sda2 b 8 2 mknod /dev/sda3 b 8 3 mknod /dev/sda4 b 8 4 mknod /dev/sda5 b 8 5 mknod /dev/sda6 b 8 6 mknod /dev/sda7 b 8 7 mknod /dev/sda8 b 8 8 mknod /dev/sda9 b 8 9 mknod /dev/sdb b 8 0 mknod /dev/sdb1 b 8 1 mknod /dev/sdb2 b 8 2 mknod /dev/sdb3 b 8 3 mknod /dev/sdb4 b 8 4 mknod /dev/sdb5 b 8 5 mknod /dev/sdb6 b 8 6 mknod /dev/sdb7 b 8 7 mknod /dev/sdb8 b 8 8 mknod /dev/sdb9 b 8 9 Bien! scanpartitions /dev/sda1 /mnt/sda1 ntfs /dev/sda2 /mnt/sda2 reiserfs /dev/sda4 /mnt/sda4 ntfs /dev/sda5 /mnt/sda5 reiserfs /dev/sda6 none swap Bien, corrí rebuildfstab -r Y ahora sí armó bien la cosa :) cat /tmp/hdinstall/etc/fstab # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/dvd /dvd iso9660 defaults,ro,users,noexec,noauto 0 0 # Added by KNOPPIX /dev/sda1 /mnt/sda1 ntfs noauto,users,exec,ro,umask=000 0 0 # Added by KNOPPIX /dev/sda4 /mnt/sda4 ntfs noauto,users,exec,ro,umask=000 0 0 # Added by KNOPPIX /dev/sda5 /mnt/sda5 reiserfs noauto,users,exec 0 0 # Added by KNOPPIX /dev/sda6 none swap defaults 0 0 --- Algunos detalles más, sobre el final: Ahora repetiremos la acción perl -pi -e 's|^(/dev/hd.*)noauto(.*)|\1auto\2|' pero con sd en lugar de hd listo ¿cómo se ve /tmp/hdinstall/etc/fstab Igual... ahora vermos si menu.lst se crea bien... SIIIIIIIII! :D ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/sda2 ro dma ramdisk_size=100000 init=/etc/init apm=power-off xorgmusix nomce quiet nocache nopreload alsa kdm lang=es vga=791 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,1) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=false ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## splashimage=(hd0,1)/boot/grub/splash.xpm.gz title Musix GNU/Linux, kernel 2.6.21 Default root (hd0,1) kernel /boot/vmlinuz root=/dev/sda2 ro dma ramdisk_size=100000 init=/etc/init apm=power-off xorgmusix nomce quiet nocache nopreload alsa kdm lang=es vga=791 initrd /boot/initrd.img savedefault title Musix GNU/Linux, kernel 2.6.21 root (hd0,1) kernel /boot/vmlinuz-2.6.21 root=/dev/sda2 ro dma ramdisk_size=100000 init=/etc/init apm=power-off xorgmusix nomce quiet nocache nopreload alsa kdm lang=es vga=791 initrd /boot/initrd.img-2.6.21 savedefault ### END DEBIAN AUTOMAGIC KERNELS LIST title Windows 2K/XP/2003 (sda1) chainloader (hd0,0)+1 title Windows 2K/XP/2003 (sda4) chainloader (hd0,3)+1 AAAAALELUYA ALELUYA, ALEEELUYA!!! AAAAALELUYA ALELUYA, ALEEELUYA!!! AAAAALELUYA ALELUYA, ALEEELUYA!!! AAAAALELUYA ALELUYA, ALEEELUYA!!! AAAAALELUYA ALELUYA, ALEEELUYA!!! AAAAALELUYA ALELUYA, ALEEELUYA!!! El 30/12/07, Marcos Guglielmetti <marcospcmusica(a)gmail.com> escribió: > El 30/12/07, Daniel Vidal Chornet <vidal_dan(a)hotmail.com> escribió: > > > > Saludos otra vez... > > > > Releo con mas atencion en fstab... ¿Te ha crecido una particion /dev/hda ???? ¿Tienes tambien discos IDE??? > > > > Seguro que no tiene importancia... pero es raro... > > > > Salud y Suerte!!!! > > Es la grabadora de cd/dvd, anda bien, no hay problemas con eso > aparentemente y no interfiere aparentemente con la instalación... > > estoy debugueando lo que, para vos y para mi, es el centro del > problema, adjunto el script modificado... estoy instalando en este > mismo momento desde el live-cd, aun sin mayores resultados... sólo sé > que si cambio > > defaults 0 1 > > por > > defaults 0 0 > > acá en esta máquina se instalaría "bien" con el parche existente en > /bin/instalar, pero quiero solucionar el problema de fondo > > > ---------------------------------------- > > > Date: Sun, 30 Dec 2007 18:55:31 +0100 > > > From: marcospcmusica(a)gmail.com > > > To: musix-colaborad(a)lists.ourproject.org > > > Subject: Re: [M-Colab] R3 test3 no se instaló correctamente > > > > > > Hola, una vez instalado, la cosa está así como muestro debajo: sda3 es > > > una partición extendida sin filesystem > > > > > > cat /etc/fstab > > > # /etc/fstab: filesystem table. > > > # > > > # filesystem mountpoint type options dump pass > > > /dev/sda2 / reiserfs defaults 0 0 > > > > > > proc /proc proc defaults 0 0 > > > /dev/fd0 /floppy vfat defaults,user,auto,showexec,umask=022 0 0 > > > usbfs /proc/bus/usb usbfs devmode=0666 0 0 > > > sysfs /sys sysfs defaults 0 0 > > > tmpfs /dev/shm tmpfs defaults 0 0 > > > /dev/cdrom /media/cdrom iso9660 defaults,ro,users,noexec,auto 0 0 > > > /dev/cdrom1 /media/cdrom1 iso9660 defaults,ro,users,noexec,auto 0 0 > > > /dev/dvd /media/dvd iso9660 defaults,ro,users,noexec,auto 0 0 > > > /dev/sda1 /mnt/sda1 ntfs auto,users,exec,ro,umask=000 0 0 > > > /dev/sda4 /mnt/sda4 ntfs auto,users,exec,ro,umask=000 0 0 > > > /dev/hda /media/hda auto users,auto,exec,ro 0 0 > > > # Added by KNOPPIX > > > /dev/sda5 /mnt/sda5 reiserfs noauto,users,exec 0 0 > > > # Added by KNOPPIX > > > /dev/sda6 none swap defaults 0 0 > > > root@box:~# fdisk -l > > > > > > Disco /dev/sda: 120.0 GB, 120034123776 bytes > > > 255 cabezas, 63 sectores/pista, 14593 cilindros > > > Unidades = cilindros de 16065 * 512 = 8225280 bytes > > > > > > Disposit. Inicio Comienzo Fin Bloques Id Sistema > > > /dev/sda1 * 1 11340 91083361 7 HPFS/NTFS > > > /dev/sda2 11340 12488 9226084 83 Linux > > > /dev/sda3 12489 13889 11253532+ 5 Extendida > > > /dev/sda4 13890 14593 5654880 7 HPFS/NTFS > > > /dev/sda5 12489 13766 10265503+ 83 Linux > > > /dev/sda6 13767 13889 987966 82 Linux swap / Solaris > > > > > > > > > El 30/12/07, Daniel Vidal Chornet escribió: > > >> > > >> Saludos > > >> > > >> Solo para un pequeño detalle... Los comentarios "# Added by KNOPPIX" ... su numero y posicion... Solo deberia haber uno antes de cada particion... ahi esta fallando algo...¿Falta /dev/sda3? ¿lo has dejado sin formatear? > > >> > > >> Solo son cosas que me llaman la atencion... por si sirven de alguna ayuda... > > >> > > >> (Disfruta de la pileta y de las pizzas... que por este barrio hace frio :)))))))) ) > > >> > > >> Salud, Suerte y Feliz Año Nuevo!!!!! > > >> ---------------------------------------- > > >>> Date: Sun, 30 Dec 2007 05:37:46 +0100 > > >>> From: marcospcmusica(a)gmail.com > > >>> To: musix-colaborad(a)lists.ourproject.org > > >>> Subject: Re: [M-Colab] R3 test3 no se instaló correctamente > > >>> > > >>> me refería a esto: > > >>> > > >>> # /etc/fstab: filesystem table. > > >>> # > > >>> # filesystem mountpoint type options dump pass > > >>> /dev/sda2 / reiserfs defaults 0 1 > > >>> > > >>> proc /proc proc defaults 0 0 > > >>> /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 > > >>> usbfs /proc/bus/usb usbfs devmode=0666 0 0 > > >>> sysfs /sys sysfs defaults 0 0 > > >>> tmpfs /dev/shm tmpfs defaults 0 0 > > >>> /dev/cdrom /media/cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> /dev/cdrom1 /media/cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> /dev/dvd /media/dvd iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> # Added by KNOPPIX > > >>> # Added by KNOPPIX > > >>> /dev/sda1 /mnt/sda1 ntfs noauto,users,exec,ro,umask=000 0 0 > > >>> # Added by KNOPPIX > > >>> # Added by KNOPPIX > > >>> /dev/sda4 /mnt/sda4 ntfs noauto,users,exec,ro,umask=000 0 0 > > >>> # Added by KNOPPIX > > >>> /dev/sda5 /mnt/sda5 reiserfs noauto,users,exec 0 0 > > >>> # Added by KNOPPIX > > >>> /dev/sda6 none swap defaults 0 0 > > >>> > > >>> > > >>> y estaba así > > >>> > > >>> # /etc/fstab: filesystem table. > > >>> # > > >>> # filesystem mountpoint type options dump pass > > >>> /dev/sda2 / reiserfs defaults 0 0 > > >>> > > >>> proc /proc proc defaults 0 0 > > >>> /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 > > >>> usbfs /proc/bus/usb usbfs devmode=0666 0 0 > > >>> sysfs /sys sysfs defaults 0 0 > > >>> tmpfs /dev/shm tmpfs defaults 0 0 > > >>> /dev/cdrom /media/cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> /dev/cdrom1 /media/cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> /dev/dvd /media/dvd iso9660 defaults,ro,users,noexec,noauto 0 0 > > >>> # Added by KNOPPIX > > >>> # Added by KNOPPIX > > >>> /dev/sda1 /mnt/sda1 ntfs noauto,users,exec,ro,umask=000 0 0 > > >>> # Added by KNOPPIX > > >>> # Added by KNOPPIX > > >>> /dev/sda4 /mnt/sda4 ntfs noauto,users,exec,ro,umask=000 0 0 > > >>> # Added by KNOPPIX > > >>> /dev/sda5 /mnt/sda5 reiserfs noauto,users,exec 0 0 > > >>> # Added by KNOPPIX > > >>> /dev/sda6 none swap defaults 0 0 > > >>> > > >>> El 30/12/07, Marcos Guglielmetti escribió: > > >>>> Si, yo instatalé recién R3 test3 en esta notebook HP con discos SATA: > > >>>> fue mejor que las anteriores veces, quedando menu.lst bien > > >>>> configurado, pero fstab tenía un error en la definición del sistema > > >>>> root, decía 0 1 y debía decir 0 0, entonces no iniciaba, el sistema > > >>>> decía que el root filesystem era sólo lectura, etc., Cuando cambié a 0 > > >>>> 0 en fstab para el sistema root, inició correctamente. > > >>>> > > >>>> Veré si puedo en estos días que me quedan acá en Junín resolver el > > >>>> problema de fondo, viendo cómo actua scanpartitions y compañía, y > > >>>> viendo dónde fallan... ahora estoy instalando el Live-DVD en esta > > >>>> máquina, > > >>>> > > >>>> son las fiestas, mucha familia, bebés, niños, pileta, sol, pizza en > > >>>> horno de barro, brindis... no dan ganas de estar encerrado programando > > >>>> o debugueando :( > > >>>> > > >>>> El 30/12/07, Gilberto Borges escribió: > > >>>>> Hola. > > >>>>> > > >>>>> Bien. > > >>>>> > > >>>>> El primer testeo de la r3 test3 no logró instalar > > >>>>> correctamente en el disco duro. El problema encontrado > > >>>>> fue el mismo de la r3 test2, ó sea: grub nó se > > >>>>> configuró correctamente. Entonces, ho he intentado > > >>>>> instalar nuevamente con metodo knoppix y he empezado > > >>>>> demasiados errores de entrada/salida. > > >>>>> Creo que en la segunda tentativa el cd ya estaba rojo > > >>>>> de tan caliente. jejeje. > > >>>>> De igual, la primera tentativa sirve de parámetro, > > >>>>> creo. El problema es que menu.lst queda vacío. Yo no > > >>>>> he mirado si habia initrd.img... lamentablemente! > > >>>>> En esta altura, yo he rebooteado y instalado la R2 > > >>>>> nevamente, pues necesito hacer unos trabajos por estos > > >>>>> dias. Alguno más he intentado instalar la R3 test3? > > >>>>> > > >>>>> Saludos. > > >>>>> > > >>>>> Gilberto > > >>>>> > > >>>>> > > >>>>> Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento! > > >>>>> http://br.mail.yahoo.com/ > > >>>>> > > >>>>> _______________________________________________ > > >>>>> Musix GNU+Linux - www.musix.org.ar > > >>>>> Musix-Colaborad mailing list > > >>>>> Musix-Colaborad(a)lists.ourproject.org > > >>>>> https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-colaborad > > >>>>> > > >>>> > > >>>> > > >>>> -- > > >>>> -- > > >>>> Marcos Guglielmetti > > >>>> * Director del desarrollo de Musix GNU+Linux, 100% Software Libre > > >>>> * CD Download: (http://www.musix.org.ar/en/) > > >>>> * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ > > >>>> * Reporte de errores a: > > >>>> https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs > > >>>> *IRC: #musix channel on freenode > > >>>> > > >>> > > >>> > > >>> -- > > >>> -- > > >>> Marcos Guglielmetti > > >>> * Director del desarrollo de Musix GNU+Linux, 100% Software Libre > > >>> * CD Download: (http://www.musix.org.ar/en/) > > >>> * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ > > >>> * Reporte de errores a: > > >>> https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs > > >>> *IRC: #musix channel on freenode > > >>> > > >>> _______________________________________________ > > >>> Musix GNU+Linux - www.musix.org.ar > > >>> Musix-Colaborad mailing list > > >>> Musix-Colaborad(a)lists.ourproject.org > > >>> https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-colaborad > > >> > > >> _________________________________________________________________ > > >> Tecnología, moda, motor, viajes,…suscríbete a nuestros boletines para estar siempre a la última > > >> http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenance… > > >> > > >> _______________________________________________ > > >> Musix GNU+Linux - www.musix.org.ar > > >> Musix-Colaborad mailing list > > >> Musix-Colaborad(a)lists.ourproject.org > > >> https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-colaborad > > >> > > >> > > > > > > > > > -- > > > -- > > > Marcos Guglielmetti > > > * Director del desarrollo de Musix GNU+Linux, 100% Software Libre > > > * CD Download: (http://www.musix.org.ar/en/) > > > * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ > > > * Reporte de errores a: > > > https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs > > > *IRC: #musix channel on freenode > > > > > > > _________________________________________________________________ > > MSN Noticias > > http://noticias.msn.es/comunidad.aspx > > > > _______________________________________________ > > Musix GNU+Linux - www.musix.org.ar > > Musix-Colaborad mailing list > > Musix-Colaborad(a)lists.ourproject.org > > https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-colaborad > > > > > > > -- > -- > Marcos Guglielmetti > * Director del desarrollo de Musix GNU+Linux, 100% Software Libre > * CD Download: (http://www.musix.org.ar/en/) > * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ > * Reporte de errores a: > https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs > *IRC: #musix channel on freenode > > -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

1 0

Alguien ha hecho funcionar la M-Audio Fast Track USB???
by Daniel Vidal Chornet 29 Dec '07

29 Dec '07

Saludos Estoy interesado en adquirir una tarjeta M-Audio Fast Track USB (o similar). He ido a una tienda esta mañana y me han dejado arrancar el Live CD de MUSIX para probar la compatibilidad... No he tenido exito... usbview reportaba la tarjeta pero alsaconf no la reconocio... En la pagina de ALSA esta tarjeta no aparece... ¿Alguien ha podido hacerla funcionar?¿Hay algun dispositivo similar en caracteristicas y precio? Se Agradece cualquier informacion al respecto Salud, Suerte y Feliz Año Nuevo!!!! _________________________________________________________________ Tecnología, moda, motor, viajes,…suscríbete a nuestros boletines para estar siempre a la última Guapos y guapas, clips musicales y estrenos de cine.

2 1

Re: [Musix-users] BEHRINGER UCG102
by Marcos Guglielmetti 29 Dec '07

29 Dec '07

Posted on: http://www.musix.org.ar/wiki/index.php?title=Compatible-Audio#USB_Audio Thanks for reporting, by the way, did you tried to configure JACK in other ways?, I mean, to choose another hardware options from the qjackctl setup Cheers 2007/12/29, Sean Edwards <cybersean3000(a)yahoo.com>: > Hello List! > > I haven't contributed in a while, but I have been lurking. > > Anyway, congratulations to everyone who received gear, or money for gear this Holiday season! > > I would like to happily report a piece of gear that works with Musix/Linux, the UCG102 Guitar Link Guitar/USB Interface UCG102! > > http://www.behringer.com/UCG102/index.cfm?lang=eng > > The CD ROM which came with the product contains Guitar Amp Combo software from Native Instruments for Win/Mac (which expires after 30 days), Audacity, and other software. Since Audacity was included, I thought I'd give it a try on Linux. On my system it showed up as alsa hw:1,0. Record, playback, and play through all worked! Ecamegapedal also worked, when the input/output paths were put on the command line: ecamegapedal alsa,hw:1,0 alsa,hw:1,0. > > For some reason jack/jackctl crashes when trying to communicate with the UCG102. Overall, I am very happy that it is usable in Linux! > > Thanks to Behringer for a great product that works with Linux! > > -=cybersean=- > > > > > > ____________________________________________________________________________________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > _______________________________________________ > Musix GNU+Linux - www.musix.org.ar > Musix-users mailing list > Musix-users(a)lists.ourproject.org > https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users > -- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode

1 0

Experiencia educativa
by francisco ariza sagovia 26 Dec '07

26 Dec '07

Felicitar a Marcos y todos sus colaboradores una vez más, especialmente ahora en Navidad. Soy profesor especialista de música en un colegio de primaria español. Nos han enviado el curso pasado 06/07 34 portátiles Toshiba M5 y 20 pc s con intel con una distribución basada en Ubuntu (Guadalinex educativa), mas un servidor de contenidos y un cortafuegos. A mi me a tocado la coordinación informática del colegio. y, como era lógico, prové varias versiones de Musix en los equipos. Al final decidí instalar Musix 1 en uno de los portátiles, pero creo que las imágenes que me descargué vía http de una web inglesa (Linuxme.co.uk , Inglaterra) -los puertos ftp están bloqueados en el servidor de contenidos por orden administrativa, me imagino para evitar la piratería- tienen algún error, porque siempre sale un mensaje en la búsqueda del módulo de configuración de sonido. He tenido que realizar muchas pruebas para que el sonido funcione. Adjunto el pc info por si me podeis ayudar con la configuración alsa que responde que no hay argumentos en el arranque para configurar el sonido y algo así. Intento ahorrar todos los pasos de descarga e instalación de una nueva imágen ya que tengo mucho trabajo con la optimización y dinamización pedagógica de los equipos y usuarios del centro. Aunque finalmente pido me indiqueis, si es posible, una dirección de descarga de una imágen vía http para trabajar con los alumnos desde un live cd compatible con los portátiles Toshiba Tecra M5 en las clases de música, pues guadalinex esta muy limitada musicalmente hablando. Me gustaría seguir contando el desarrollo de la experiencia. Saludos, espero que hubiesen tenido feliz navidad y tengan buen año nuevo. Francisco Ariza Segovia ______________________________________________ ¿Chef por primera vez? Sé un mejor Cocinillas. http://es.answers.yahoo.com/info/welcome CPU0 0: 144131 IO-APIC-edge timer 1: 1166 IO-APIC-edge i8042 8: 3 IO-APIC-edge rtc 9: 132 IO-APIC-fasteoi acpi 12: 182426 IO-APIC-edge i8042 14: 22128 IO-APIC-edge libata 15: 722 IO-APIC-edge ide1 17: 87983 IO-APIC-fasteoi uhci_hcd:usb4, eth1, i915@pci:0000:00:02.0 18: 0 IO-APIC-fasteoi uhci_hcd:usb3 19: 1 IO-APIC-fasteoi yenta 20: 0 IO-APIC-fasteoi uhci_hcd:usb2 21: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, sdhci:slot0 22: 3 IO-APIC-fasteoi ohci1394 NMI: 0 LOC: 134493 ERR: 4 MIS: 0 _________________________________________ CPUINFO processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T1300 @ 1.66GHz stepping : 8 cpu MHz : 1662.550 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe constant_tsc up pni monitor vmx est tm2 xtpr bogomips : 3328.02 clflush size : 64 _________________________________________ snd-page-alloc _________________________________________ MEMINFO _________________________________________ Placas de sonido reconocidas por el sistema _________________________________________ cat /proc/asound/cards --- no soundcards --- cat /proc/isapnp >>/tmp/pcinfo.txt _________________________________________ HWSETUP --- class: OTHER bus: PCI device: (null) driver: unknown desc: Texas Instruments|unknown device 104c:803c --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:4222 --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:27c4 --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:27b9 --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|82801BAM/CAM PCI Bridge --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:27d4 --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:27d2 --- class: OTHER bus: PCI device: (null) driver: unknown desc: Intel Corp.|unknown device 8086:27d0 --- class: OTHER bus: PCI device: (null) driver: snd-hda-intel desc: Unknown vendor|Generic snd-hda-intel device --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.21 ehci_hcd EHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.21 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.21 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.21 uhci_hcd UHCI Host Controller --- class: OTHER bus: USB device: (null) driver: unknown desc: Linux 2.6.21 uhci_hcd UHCI Host Controller --- class: OTHER bus: PCI device: (null) driver: intel-agp desc: Unknown vendor|Generic intel-agp device --- class: NETWORK bus: PCI device: eth driver: e1000 desc: Unknown vendor|Generic e1000 device write config(/etc/sysconfig/netcard) update config(/etc/sysconfig/knoppix) --- class: MOUSE bus: PSAUX device: psaux driver: msintellips/2 desc: Generic PS/2 Wheel Mouse write config(/etc/sysconfig/mouse) update config(/etc/sysconfig/knoppix) symlink(/dev/psaux,/dev/mouse) --- class: CDROM bus: IDE device: hdc driver: ignore desc: DVD/CDRW UJDA770 symlink(/dev/hdc,/dev/cdrom) --- class: VIDEO bus: PCI device: fb0 driver: unknown desc: Intel Corp.|unknown device 8086:27a6 write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: VIDEO bus: PCI device: fb0 driver: intelfb desc: Unknown vendor|Generic intelfb device write config(/etc/sysconfig/xserver) update config(/etc/sysconfig/knoppix) --- class: USB bus: PCI device: (null) driver: ehci-hcd desc: Intel Corp.|unknown device 8086:27cc --- class: USB bus: PCI device: (null) driver: usb-uhci desc: Intel Corp.|unknown device 8086:27cb --- class: USB bus: PCI device: (null) driver: usb-uhci desc: Intel Corp.|unknown device 8086:27ca --- class: USB bus: PCI device: (null) driver: usb-uhci desc: Intel Corp.|unknown device 8086:27c9 --- class: USB bus: PCI device: (null) driver: usb-uhci desc: Intel Corp.|unknown device 8086:27c8 --- class: UNKNOWN bus: PCI device: (null) driver: yenta_socket desc: Unknown vendor|Generic yenta_socket device --- class: UNKNOWN bus: PCI device: (null) driver: ohci1394 desc: Texas Instruments|unknown device 104c:803a _________________________________________ ESPACIO_USADO_LIBRE S.ficheros Tamaño Usado Disp Uso% Montado en /dev/sda2 5,6G 2,5G 3,2G 44% / tmpfs 248M 0 248M 0% /lib/init/rw udev 10M 72K 10M 1% /dev tmpfs 248M 0 248M 0% /dev/shm _________________________________________ Modulos ALSA cargados snd_hda_intel 24344 0 snd_hda_codec 202496 1 snd_hda_intel snd_pcm_oss 43424 0 snd_mixer_oss 19712 1 snd_pcm_oss snd_pcm 76292 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_page_alloc 13704 2 snd_hda_intel,snd_pcm snd_seq_dummy 7940 0 snd_seq_oss 33664 0 snd_seq_midi 12320 0 snd_rawmidi 26656 1 snd_seq_midi snd_seq_midi_event 11136 2 snd_seq_oss,snd_seq_midi snd_seq 50896 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 25220 2 snd_pcm,snd_seq snd_seq_device 11788 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 53092 10 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12000 1 snd _________________________________________ cat /etc/security/limits.conf # /etc/security/limits.conf # #Each line describes a limit for a user in the form: # #<domain> <type> <item> <value> # #Where: #<domain> can be: # - an user name # - a group name, with @group syntax # - the wildcard *, for default entry # - the wildcard %, can be also used with %group syntax, # for maxlogin limit # #<type> can have the two values: # - "soft" for enforcing the soft limits # - "hard" for enforcing hard limits # #<item> can be one of the following: # - core - limits the core file size (KB) # - data - max data size (KB) # - fsize - maximum filesize (KB) # - memlock - max locked-in-memory address space (KB) # - nofile - max number of open files # - rss - max resident set size (KB) # - stack - max stack size (KB) # - cpu - max CPU time (MIN) # - nproc - max number of processes # - as - address space limit # - maxlogins - max number of logins for this user # - maxsyslogins - max number of logins on the system # - priority - the priority to run user process with # - locks - max number of file locks the user can hold # - sigpending - max number of pending signals # - msgqueue - max memory used by POSIX message queues (bytes) # - nice - max nice priority allowed to raise to # - rtprio - max realtime priority # #<domain> <type> <item> <value> # #* soft core 0 #* hard rss 10000 #@student hard nproc 20 #@faculty soft nproc 20 #@faculty hard nproc 50 #ftp hard nproc 0 #@student - maxlogins 4 @audio - rtprio 99 @audio - nice -10 @audio - memlock 4000000 # End of file _________________________________________ cat /etc/security/limits.conf # /etc/security/limits.conf # #Each line describes a limit for a user in the form: # #<domain> <type> <item> <value> # #Where: #<domain> can be: # - an user name # - a group name, with @group syntax # - the wildcard *, for default entry # - the wildcard %, can be also used with %group syntax, # for maxlogin limit # #<type> can have the two values: # - "soft" for enforcing the soft limits # - "hard" for enforcing hard limits # #<item> can be one of the following: # - core - limits the core file size (KB) # - data - max data size (KB) # - fsize - maximum filesize (KB) # - memlock - max locked-in-memory address space (KB) # - nofile - max number of open files # - rss - max resident set size (KB) # - stack - max stack size (KB) # - cpu - max CPU time (MIN) # - nproc - max number of processes # - as - address space limit # - maxlogins - max number of logins for this user # - maxsyslogins - max number of logins on the system # - priority - the priority to run user process with # - locks - max number of file locks the user can hold # - sigpending - max number of pending signals # - msgqueue - max memory used by POSIX message queues (bytes) # - nice - max nice priority allowed to raise to # - rtprio - max realtime priority # #<domain> <type> <item> <value> # #* soft core 0 #* hard rss 10000 #@student hard nproc 20 #@faculty soft nproc 20 #@faculty hard nproc 50 #ftp hard nproc 0 #@student - maxlogins 4 @audio - rtprio 99 @audio - nice -10 @audio - memlock 4000000 # End of file _________________________________________ ls -la /etc/rc5.d/ total 17 drwxr-xr-x 10 frarisegovia root 1280 2007-11-17 06:28 . drwxrwxrwx 183 root root 12024 2007-12-26 11:51 .. drwxr-xr-x 2 root root 192 2005-12-10 22:09 backup drwxr-xr-x 2 root root 328 2006-01-18 13:39 backup031 drwxr-xr-x 2 root root 264 2006-02-23 23:55 backup039 drwxr-xr-x 2 root root 880 2006-02-04 04:49 backup-post031 drwxr-xr-x 2 root root 160 2006-05-29 13:52 backup-post040 drwxr-xr-x 2 frarisegovia frarisegovia 272 2006-08-30 13:40 backup-pre059 drwxr-xr-x 2 root root 296 2006-02-04 04:49 original -rw-r--r-- 1 root root 556 2007-01-30 23:27 README drwxr-xr-x 2 root root 168 2006-02-23 23:54 removed-pre039 lrwxrwxrwx 1 root root 17 2007-09-30 23:39 S05vbesave -> ../init.d/vbesave lrwxrwxrwx 1 root root 17 2007-09-30 23:50 S12kerneld -> ../init.d/kerneld lrwxrwxrwx 1 root root 16 2007-09-30 23:50 S15pcmcia -> ../init.d/pcmcia lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S15realtime -> /etc/init.d/realtime lrwxrwxrwx 1 root root 15 2007-09-30 23:39 S20acpid -> ../init.d/acpid lrwxrwxrwx 1 root root 14 2007-09-30 23:50 S20alsa -> ../init.d/alsa lrwxrwxrwx 1 root root 16 2007-09-30 23:50 S20autofs -> ../init.d/autofs lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S20cpufreqd -> ../init.d/cpufreqd lrwxrwxrwx 1 root root 16 2007-09-30 23:39 S20cupsys -> ../init.d/cupsys lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S20firestarter -> ../init.d/firestarter lrwxrwxrwx 1 root root 17 2007-10-18 18:18 S20ifplugd -> ../init.d/ifplugd lrwxrwxrwx 1 root root 23 2007-09-30 23:39 S20openbsd-inetd -> ../init.d/openbsd-inetd lrwxrwxrwx 1 root root 15 2007-09-30 23:39 S20samba -> ../init.d/samba lrwxrwxrwx 1 root root 13 2007-11-17 06:28 S20xfs -> ../init.d/xfs lrwxrwxrwx 1 root root 24 2007-09-30 23:39 S40dhcp3-server -> /etc/init.d/dhcp3-server lrwxrwxrwx 1 root root 13 2007-09-30 23:50 S89atd -> ../init.d/atd lrwxrwxrwx 1 root root 21 2007-10-06 20:15 S90sndconf-musix.sh -> /bin/sndconf-musix.sh lrwxrwxrwx 1 root root 17 2007-11-04 21:47 S91apache2 -> ../init.d/apache2 lrwxrwxrwx 1 root root 24 2007-09-30 23:39 S96knoppix-user-livecd -> /bin/knoppix-user-livecd lrwxrwxrwx 1 root root 25 2007-09-30 23:39 S98cambiar-fondo-kdm.sh -> /bin/cambiar-fondo-kdm.sh lrwxrwxrwx 1 root root 23 2007-11-06 19:36 S98musix-modem -> /etc/init.d/musix-modem lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S99acpi-support -> ../init.d/acpi-support lrwxrwxrwx 1 root root 19 2007-09-30 23:39 S99alsactl -> /etc/init.d/alsactl lrwxrwxrwx 1 root root 27 2007-09-30 23:39 S99force-localhost -> /etc/init.d/force-localhost lrwxrwxrwx 1 root root 13 2007-09-30 23:50 S99kdm -> ../init.d/kdm lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S99rc.local -> ../init.d/rc.local lrwxrwxrwx 1 root root 19 2007-09-30 23:39 S99rmnologin -> ../init.d/rmnologin lrwxrwxrwx 1 root root 15 2007-09-30 23:39 S99rtirq -> ../init.d/rtirq lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S99timidity -> ../init.d/timidity lrwxrwxrwx 1 root root 13 2007-09-30 23:50 S99xdm -> ../init.d/xdm lrwxrwxrwx 1 root root 29 2007-09-30 23:39 S99xorgmusix-live-cd -> /etc/init.d/xorgmusix-live-cd _________________________________________ ls -la /etc/rcS.d/ total 19 drwxr-xr-x 9 frarisegovia root 2184 2007-11-17 04:35 . drwxrwxrwx 183 root root 12024 2007-12-26 11:51 .. drwxr-xr-x 2 root root 328 2006-01-18 13:40 backup031 drwxr-xr-x 2 root root 472 2006-02-23 23:52 backup039 drwxr-xr-x 2 root root 648 2006-02-04 04:45 backup-post031 drwxr-xr-x 2 frarisegovia frarisegovia 536 2006-08-31 19:18 backup-pre059 drwxr-xr-x 2 root root 80 2006-11-22 03:39 backup-pre079 drwxr-xr-x 2 root root 312 2005-12-10 22:09 original -rw-r--r-- 1 root root 785 2006-01-07 08:47 README drwxr-xr-x 2 root root 184 2006-02-23 23:52 removed-pre039 lrwxrwxrwx 1 root root 31 2007-09-30 23:50 S00knoppix-hd-autoconfig -> ../init.d/knoppix-hd-autoconfig lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S00splashy-init -> ../init.d/splashy-init lrwxrwxrwx 1 root root 17 2007-09-30 23:39 S01splashy -> ../init.d/splashy lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S02glibc.sh -> ../init.d/glibc.sh lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S02hostname.sh -> ../init.d/hostname.sh lrwxrwxrwx 1 root root 24 2007-09-30 23:39 S02mountkernfs.sh -> ../init.d/mountkernfs.sh lrwxrwxrwx 1 root root 14 2007-09-30 23:39 S03udev -> ../init.d/udev lrwxrwxrwx 1 root root 26 2007-09-30 23:39 S04mountdevsubfs.sh -> ../init.d/mountdevsubfs.sh lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S05bootlogd -> ../init.d/bootlogd lrwxrwxrwx 1 root root 25 2007-09-30 23:39 S05initrd-tools.sh -> ../init.d/initrd-tools.sh lrwxrwxrwx 1 root root 19 2007-09-30 23:39 S05keymap.sh -> ../init.d/keymap.sh lrwxrwxrwx 1 root root 16 2007-09-30 23:39 S07hdparm -> ../init.d/hdparm lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S10checkroot.sh -> ../init.d/checkroot.sh lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S11hwclock.sh -> ../init.d/hwclock.sh lrwxrwxrwx 1 root root 17 2007-09-30 23:39 S12mtab.sh -> ../init.d/mtab.sh lrwxrwxrwx 1 root root 16 2007-09-30 23:50 S15isapnp -> ../init.d/isapnp lrwxrwxrwx 1 root root 26 2007-09-30 23:39 S18ifupdown-clean -> /etc/init.d/ifupdown-clean lrwxrwxrwx 1 root root 27 2007-09-30 23:39 S20module-init-tools -> ../init.d/module-init-tools lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S20modutils -> ../init.d/modutils lrwxrwxrwx 1 root root 26 2007-09-30 23:39 S25libdevmapper1.02 -> ../init.d/libdevmapper1.02 lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S28checkfs-loop -> ../init.d/checkfs-loop lrwxrwxrwx 1 root root 25 2007-09-30 23:39 S29fsck-musix.sh -> /etc/init.d/fsck-musix.sh lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S30checkfs.sh -> ../init.d/checkfs.sh lrwxrwxrwx 1 root root 19 2007-09-30 23:39 S30procps.sh -> ../init.d/procps.sh lrwxrwxrwx 1 root root 19 2007-09-30 23:50 S30setserial -> ../init.d/setserial lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S35mountall.sh -> ../init.d/mountall.sh lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S36discover -> ../init.d/discover lrwxrwxrwx 1 root root 31 2007-09-30 23:39 S36mountall-bootclean.sh -> ../init.d/mountall-bootclean.sh lrwxrwxrwx 1 root root 19 2007-09-30 23:39 S36udev-mtab -> ../init.d/udev-mtab lrwxrwxrwx 1 root root 16 2007-09-30 23:39 S37setkey -> ../init.d/setkey lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S38pppd-dns -> ../init.d/pppd-dns lrwxrwxrwx 1 root root 19 2007-09-30 23:50 S39dns-clean -> ../init.d/dns-clean lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S39ifupdown -> ../init.d/ifupdown lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S39ifupdown-clean -> /etc/init.d/ifupdown lrwxrwxrwx 1 root root 20 2007-11-17 04:35 S40flashybrid -> ../init.d/flashybrid lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S40networking -> ../init.d/networking lrwxrwxrwx 1 root root 21 2007-10-18 17:40 S40pcmciautils -> ../init.d/pcmciautils lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S45mountnfs.sh -> ../init.d/mountnfs.sh lrwxrwxrwx 1 root root 31 2007-09-30 23:39 S46mountnfs-bootclean.sh -> ../init.d/mountnfs-bootclean.sh lrwxrwxrwx 1 root root 27 2007-09-30 23:39 S48console-screen.sh -> ../init.d/console-screen.sh lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S50alsa-utils -> ../init.d/alsa-utils lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S50sndconf-musix.sh -> /bin/sndconf-musix.sh lrwxrwxrwx 1 root root 21 2007-09-30 23:39 S55bootmisc.sh -> ../init.d/bootmisc.sh lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S55makeautobackup.sh -> /bin/makeautobackup.sh lrwxrwxrwx 1 root root 17 2007-09-30 23:39 S55urandom -> ../init.d/urandom lrwxrwxrwx 1 root root 18 2007-09-30 23:39 S61kdmset -> /etc/init.d/kdmset lrwxrwxrwx 1 root root 29 2007-09-30 23:39 S65mkinitrd-musix.sh -> /etc/init.d/mkinitrd-musix.sh lrwxrwxrwx 1 root root 24 2007-09-30 23:39 S70screen-cleanup -> ../init.d/screen-cleanup lrwxrwxrwx 1 root root 20 2007-09-30 23:39 S70x11-common -> ../init.d/x11-common lrwxrwxrwx 1 root root 22 2007-09-30 23:39 S71xserver-xorg -> ../init.d/xserver-xorg lrwxrwxrwx 1 root root 14 2007-09-30 23:39 S75sudo -> ../init.d/sudo lrwxrwxrwx 1 root root 30 2007-09-30 23:39 S80createforcefsck.sh -> /etc/init.d/createforcefsck.sh lrwxrwxrwx 1 root root 31 2007-09-30 23:39 S80eq-xmms-postinst.sh -> /etc/init.d/eq-xmms-postinst.sh lrwxrwxrwx 1 root root 28 2007-09-30 23:39 S90rm-nologin-musix -> /etc/init.d/rm-nologin-musix lrwxrwxrwx 1 root root 30 2007-09-30 23:39 S99stop-bootlogd-single -> ../init.d/stop-bootlogd-single _________________________________________ Modulos OSS cargados soundcore 12000 1 snd _________________________________________ ________________VIDEO______________________ ________________Xorg________________________ # /etc/X11/xorg.conf, created by xorgmusix.sh Section "ServerLayout" Identifier "Xorg Configurado" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Serial Mouse" "CorePointer" # habilitamos esto? #InputDevice "PS/2 Mouse" "CorePointer" InputDevice "USB Mouse" "CorePointer" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" EndSection ##disabled## Section "extensions" ##disabled## Option "Composite" "Enable" ##disabled## Option "RENDER" "Enable" ##disabled## EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" RgbPath "/usr/X11R6/lib/X11/rgb" #ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... #FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" # mouse wheel, rueda del mouse #Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "i810" VendorName "Intel Corporation" BoardName "Mobile 945GM/GMS/940GML Express Integrated Graphics Controller" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 24 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 # You can add things links "1280x768" here... Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection _________________________________________ ______________errores de video________________ Xsession: X session started for root at mié dic 26 11:03:23 CET 2007 Configurando el teclado en Entorno Gráfico en español chown: no se puede acceder a «/home/root/.ICE*»: No existe el fichero o el directorio rm: no se puede borrar «/tmp/admin.flag»: No existe el fichero o el directorio /root/Desktop/Autostart/start.sh: line 32: dhclient-force: command not found icewmtray: using /root/.icewm for private configuration files IceWM: using /root/.icewm for private configuration files IceWM: Atención: Deprecated option: showPopupsAbovePointer == true IceWM: Atención: Deprecated option: sizeMaximized == true IceWM: Opción de ventana desconocida: onTop IceWM: Atención: Deprecated option: "ignoreWinlist windowoption" DCOPClient::attachInternal. Attach failed Could not open network socket DCOPClient::attachInternal. Attach failed Could not open network socket Link points to "/tmp/ksocket-root" Link points to "/tmp/kde-root" kbuildsycoca running... kio (KService*): WARNING: Invalid Service : conv_dir_sox.desktop kio (KService*): WARNING: Invalid Service : media_realfolder.desktop kio (KSycoca): ERROR: No database available! DCOPClient::attachInternal. Attach failed Could not open network socket kdeinit: Shutting down running client. --------------------------------- It looks like dcopserver is already running. If you are sure that it is not already running, remove /root/.DCOPserver_cajacole__0 and start dcopserver again. --------------------------------- KDE Daemon (kded) already running. kbuildsycoca running... Reusing existing ksycoca kio (KService*): WARNING: Invalid Service : conv_dir_sox.desktop kio (KService*): WARNING: Invalid Service : media_realfolder.desktop kio (KSycoca): ERROR: No database available! IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/gnome_wave_cleaner.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/jack-rack.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/jack-rack.xpm" IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm All fallbacks failed. See /usr/share/doc/imlib2/README.fallback. IceWM: Atención: Error al cargar imagen "/usr/share/pixmaps/jack-rack.xpm" rm: no se puede borrar «/tmp/admin.flag»: No existe el fichero o el directorio Error occurred while initializing audio output method 'oss' -- virtual void COSSSoundPlayer::initialize() -- error opening OSS device '/dev/dsp -- No existe el fichero o el directorio ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card Error occurred while initializing audio output method 'alsa' -- virtual void CALSASoundPlayer::initialize() -- cannot open audio device: hw:0 -- No existe tal dispositivo Error occurred while initializing audio output method 'jack' -- virtual void CJACKSoundPlayer::initialize() -- error conectando al servidor jack -- ¿jackd no está en marcha? 'lame' executable not found in $PATH -- mp3 support will be disabled If rezound dies unexpectedly while seeking with the keyboard, auto-repeat may be disabled.. if this happens run 'rezound --fix-auto-repeat' using path '/usr/share/rezound' for share data directory non-network local connections being added to access control list Pude matar el escritorio porque soy root y estoy en /etc/sudoers... o porque estï¿œ habilitado algo como esto: %users hostname=NOPASSWD: /bin/matar-rox-root.sh Hay que cambiar hostname por el nombre real del host... (synaptic:17057): Gtk-CRITICAL **: gtk_tree_view_unref_tree_helper: assertion `node != NULL' failed (synaptic:17057): Gtk-CRITICAL **: gtk_tree_view_unref_tree_helper: assertion `node != NULL' failed Error opening terminal: unknown. 'unknown': unknown terminal type. cat: /proc/driver/snd-page-alloc: No existe el fichero o el directorio cat: /proc/isapnp: No existe el fichero o el directorio _________________________________________ ______________fstab________________ # /etc/fstab: filesystem table. # # filesystem mountpoint type options dump pass /dev/sda2 / reiserfs defaults 0 1 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 usbfs /proc/bus/usb usbfs devmode=0666 0 0 sysfs /sys sysfs defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/cdrom1 /cdrom1 iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/dvd /dvd iso9660 defaults,ro,users,noexec,noauto 0 0 /dev/scd0 /media/scd0 auto users,noauto,exec,ro 0 0 # Added by KNOPPIX /dev/sda1 /mnt/sda1 ext3 noauto,users,exec 0 0 # Added by KNOPPIX /dev/sda3 none swap defaults 0 0 _________________________________________ ______________lsmod________________ Module Size Used by snd_hda_intel 24344 0 snd_hda_codec 202496 1 snd_hda_intel snd_pcm_oss 43424 0 snd_mixer_oss 19712 1 snd_pcm_oss snd_pcm 76292 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_page_alloc 13704 2 snd_hda_intel,snd_pcm snd_seq_dummy 7940 0 snd_seq_oss 33664 0 snd_seq_midi 12320 0 snd_rawmidi 26656 1 snd_seq_midi snd_seq_midi_event 11136 2 snd_seq_oss,snd_seq_midi snd_seq 50896 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 25220 2 snd_pcm,snd_seq snd_seq_device 11788 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 53092 10 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12000 1 snd autofs4 24836 0 pcmcia 39724 2 hostap 106628 0 orinoco_pci 11008 0 orinoco 42260 1 orinoco_pci hermes 11264 2 orinoco_pci,orinoco ipw2100 69936 0 ipw2200 141256 0 ieee80211 35528 2 ipw2100,ipw2200 ieee80211_crypt_wep 9216 0 ieee80211_crypt_ccmp 11136 0 ieee80211_crypt 9984 4 hostap,ieee80211,ieee80211_crypt_wep,ieee80211_crypt_ccmp prism54 57096 0 i915 25728 2 drm 78612 3 i915 ipv6 271296 15 ppdev 12804 0 lp 16008 0 realtime 9608 0 deflate 7936 0 zlib_deflate 21912 1 deflate twofish 12544 0 twofish_common 40320 1 twofish camellia 35328 0 serpent 23040 0 blowfish 13440 0 des 21504 0 cbc 8448 0 ecb 7552 0 blkcipher 10116 2 cbc,ecb aes 32192 0 xcbc 9736 0 sha256 15232 0 sha1 6784 0 crypto_null 6656 0 dm_snapshot 20648 0 dm_mirror 24724 0 af_packet 29192 0 dm_mod 58060 2 dm_snapshot,dm_mirror commoncap 11008 1 realtime video 20744 0 toshiba_acpi 10520 0 thermal 18312 0 sbs 18984 0 processor 36840 1 thermal i2c_ec 9344 1 sbs i2c_core 25088 1 i2c_ec fan 9092 0 container 8704 0 button 12176 0 bay 10240 0 dock 13760 1 bay battery 14212 0 ac 9476 0 aufs 167544 0 sbp2 25604 0 usb_storage 69056 0 libusual 21136 1 usb_storage ohci_hcd 23940 0 eth1394 22788 0 firmware_class 13824 4 pcmcia,ipw2100,ipw2200,prism54 sdhci 21132 0 mmc_core 30596 1 sdhci ohci1394 37040 0 ieee1394 94552 3 sbp2,eth1394,ohci1394 yenta_socket 29196 2 rsrc_nonstatic 16768 1 yenta_socket pcmcia_core 41496 3 pcmcia,yenta_socket,rsrc_nonstatic parport_pc 41316 0 parport 38088 3 ppdev,lp,parport_pc e1000 115776 0 intel_agp 27292 1 agpgart 36556 3 drm,intel_agp 8250_pnp 13696 0 8250 28036 1 8250_pnp serial_core 24192 1 8250 ehci_hcd 35340 0 uhci_hcd 26768 0 usbcore 128264 6 usb_storage,libusual,ohci_hcd,ehci_hcd,uhci_hcd pcspkr 7296 0 evdev 13440 0 joydev 13376 0 aha152x 38800 0 aha1740 12288 0 _______________ ps -A _____________________ PID TTY TIME CMD 1 ? 00:00:01 init 2 ? 00:00:00 migration/0 3 ? 00:00:00 ksoftirqd/0 4 ? 00:00:00 watchdog/0 5 ? 00:00:00 events/0 6 ? 00:00:00 khelper 7 ? 00:00:00 kthread 42 ? 00:00:00 kblockd/0 43 ? 00:00:00 kacpid 157 ? 00:00:00 ata/0 158 ? 00:00:00 ata_aux 159 ? 00:00:00 kseriod 183 ? 00:00:00 pdflush 184 ? 00:00:00 pdflush 185 ? 00:00:00 kswapd0 186 ? 00:00:00 aio/0 328 ? 00:00:00 scsi_eh_0 329 ? 00:00:00 scsi_eh_1 367 ? 00:00:00 kpsmoused 430 ? 00:00:00 reiserfs/0 650 ? 00:00:00 udevd 998 ? 00:00:00 ksuspend_usbd 999 ? 00:00:00 khubd 1139 ? 00:00:00 khpsbpkt 1150 ? 00:00:00 knodemgrd_0 1158 ? 00:00:00 kmmcd 1221 ? 00:00:00 pccardd 1702 ? 00:00:00 aufsd 1703 ? 00:00:00 aufsd 1704 ? 00:00:00 aufsd 1705 ? 00:00:00 aufsd 1811 ? 00:00:00 kmirrord 1815 ? 00:00:00 ksnapd 8665 ? 00:00:00 cardmgr 8737 ? 00:00:00 acpid 8802 ? 00:00:00 cupsd 8842 ? 00:00:00 ifplugd 8871 ? 00:00:00 nmbd 8889 ? 00:00:00 xfs 14684 ? 00:00:00 apache2 14730 ? 00:00:00 apache2 14731 ? 00:00:00 apache2 14732 ? 00:00:00 apache2 14733 ? 00:00:00 apache2 14734 ? 00:00:00 apache2 14787 ? 00:00:00 kdm 14887 tty7 00:00:14 Xorg 14939 tty1 00:00:00 getty 14940 tty2 00:00:00 getty 14941 tty3 00:00:00 getty 14942 tty4 00:00:00 getty 14943 tty5 00:00:00 getty 14944 tty6 00:00:00 getty 14955 ? 00:00:00 kdm 14971 ? 00:00:01 icewm 15024 ? 00:00:00 ssh-agent 15042 ? 00:00:00 icewmtray 15052 ? 00:00:00 kxkb 15069 ? 00:00:00 dcopserver 15073 ? 00:00:00 kded 15078 ? 00:00:00 kdeinit 15081 ? 00:00:00 klauncher 17055 ? 00:00:00 rox-filer 22861 ? 00:00:00 pcinfo.sh 22874 ? 00:00:00 xmessage 23007 ? 00:00:00 ps _________________________________________ _________________GRUB____________________ # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 10 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/sda2 ro ramdisk_size=100000 lang=es apm=power-off nomce vga=791 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,1) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=false ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## splashimage=(hd0,1)/boot/grub/splash.xpm.gz title Guadalinex, kernel 2.6.12-10-686 root (hd0,0) kernel /boot/vmlinuz-2.6.12-10-686 root=/dev/sda1 ro quiet splash initrd /boot/initrd.img-2.6.12-10-686 savedefault boot title Guadalinex, kernel 2.6.12-10-686 (recovery mode) root (hd0,0) kernel /boot/vmlinuz-2.6.12-10-686 root=/dev/sda1 ro single password --md5 $1$RTEFc1$TtQvImnmXq/wDQaQyN7Ec1 initrd /boot/initrd.img-2.6.12-10-686 boot title Guadalinex, memtest86+ root (hd0,0) kernel /boot/memtest86+.bin boot title Musix GNU/Linux, kernel 2.6.21 Default root (hd0,1) kernel /boot/vmlinuz root=/dev/sda2 ro ramdisk_size=100000 lang=es apm=power-off nomce vga=791 initrd /boot/initrd.img savedefault title Musix GNU/Linux, kernel 2.6.21 root (hd0,1) kernel /boot/vmlinuz-2.6.21 root=/dev/sda2 ro ramdisk_size=100000 lang=es apm=power-off nomce vga=791 initrd /boot/initrd.img-2.6.21 savedefault title Musix GNU/Linux, kernel 2.6.18-4-686 root (hd0,1) kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/sda2 ro ramdisk_size=100000 lang=es apm=power-off nomce vga=791 initrd /boot/initrd.img-2.6.18-4-686 savedefault ### END DEBIAN AUTOMAGIC KERNELS LIST #Modificado por update-grub-total para Musix _________________________________________ Linux cajacole 2.6.21 #1 SMP PREEMPT Fri Apr 27 18:08:33 EEST 2007 i686 GNU/Linux ___________opciones de inicio del kernel:________________ root=/dev/sda2 ro ramdisk_size=100000 lang=es apm=power-off nomce vga=791

1 0

Recomendado KEYTOUCH
by Alejandro Fabrega 26 Dec '07

26 Dec '07

Estuve viendo como darle funcionalidad al teclado multimedia y descubrí Keytouch (http://keytouch.sourceforge.net) Lo pueden instalar por Synaptic o Apt-get. A mi parecio muy interesante, los invito a que lo prueben. EXITOS Alejandro

1 0

Problemas Varios
by Alejandro Fabrega 24 Dec '07

24 Dec '07

Buenas gente! Les escribo desde Musix que hace ya 4 o cinco dias está funcionando en mi PC. La instalación se hice sin problemas y sin ningun contratiempo. Ya habia estado jugando un buen tiempo con el live-cd y estaba bastante familiarizado con su funcionamiento. Ahora bien me han surgido los siguientes inconvenientes: Cuando quise instalar el querido VLC con apt-get install vlc me da los siguientes errores: root@box:~# apt-get install vlc Leyendo lista de paquetes... Hecho Creando árbol de dependencias... Hecho Tal vez quiera ejecutar `apt-get -f install' para corregirlo: Los siguientes paquetes tienen dependencias incumplidas: solfege: Depende: python-gnome2 (>= 1.99.11) pero no va a instalarse Depende: python-gnome2-extras (>= 2.10.0) pero no va a instalarse vlc: Depende: libcaca0 (>= 0.99.beta13b-1) pero 0.99.beta11.debian-2 va a ser instalado Depende: libcdio7 pero no va a instalarse Depende: libcucul0 (>= 0.99.beta13b-1) pero 0.99.beta11.debian-2 va a ser instalado Depende: libdbus-1-3 (>= 1.1.1) pero 1.0.2-1 va a ser instalado Depende: libdbus-glib-1-2 (>= 0.74) pero 0.71-3 va a ser instalado Depende: libiso9660-5 pero no va a instalarse Depende: libnotify1 (>= 0.4.4) pero no va a instalarse Depende: libnotify1-gtk2.10 Depende: libtar pero no va a instalarse Depende: libvlc0 (>= 0.8.6.c) pero no va a instalarse Depende: ttf-dejavu-core pero no va a instalarse Depende: vlc-nox (= 0.8.6.c-4) pero no va a instalarse E: Dependencias incumplidas. Intente 'apt-get -f install' sin paquetes (o especifique una solución). Por mas que intente "apt-get -f install" no pasa naranja. y en Synaptic para VLC **Extrayendo plantillas para los paquetes: 100% (Leyendo la base de datos ... 91314 ficheros y directorios instalados actualmente.) Desinstalando solfege ... Document `solfege' is not installed, cannot remove. usage: update-python-modules [-v] [-c] package_directory [...] update-python-modules [-v] [-c] package.dirs [...] update-python-modules [-v] [-a|-f] update-python-modules: error: /usr/share/solfege is not in the python-support directory. dpkg: error al procesar solfege (--remove): el subproceso pre-removal script devolvió el código de salida de error 2 Se encontraron errores al procesar: solfege Not all changes and updates succeeded. For further details of the the failure, please expand the 'terminal' panel below. Los errores de apt-get inclusive me los da con cualquier paquete: por ejemplo apt-get install apollon root@box:~# apt-get install apollon Leyendo lista de paquetes... Hecho Creando árbol de dependencias... Hecho Tal vez quiera ejecutar `apt-get -f install' para corregirlo: Los siguientes paquetes tienen dependencias incumplidas: apollon: Depende: libgift0 (< 0.12) pero no va a instalarse Depende: libgift0 (>= 0.11.8.1) pero no va a instalarse solfege: Depende: python-gnome2 (>= 1.99.11) pero no va a instalarse Depende: python-gnome2-extras (>= 2.10.0) pero no va a instalarse E: Dependencias incumplidas. Intente 'apt-get -f install' sin paquetes (o especifique una solución) Ergo, no he podido instalar nada mas que el Amsn. Muchas Gracias. Alejandro

3 11

En poco tiempo r3 test3 estará en GNU.org
by Marcos Guglielmetti 23 Dec '07

23 Dec '07

De paso, les comento que esta versión tuvo un buen recibimiento, lo cual se puede en parte ver acá: http://www.musix.org.ar/wiki/index.php?title=Musix_en_el_mundo:_toda_la_act… Cuando esté en GNU debemos actualizar los links en las páginas de descarga de los diferentes idiomas en el WIKI: http://www.musix.org.ar/wiki/index.php/Musix1.0r3test3-announce -- `&' # Marcos Guglielmetti, co-director de # Musix GNU+Linux, 100% Software Libre para artistas _#_ http://www.musix.org.ar (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix ( === ) Ecología: http://autosus.wordpress.com `---' Personal: http://marcospcmusica.wordpress.com "Los hamsters no pueden volar" http://es.wikiquote.org/wiki/Los_Simpson_pizarra

1 0

Nueva version de Rosegarden 1.6.1
by Marcos Guglielmetti 22 Dec '07

22 Dec '07

El Sábado, 22 de Diciembre de 2007 14:11, Daniel Vidal Chornet escribió: | Saludos | | Acabo de ver en la Web de Rosegarden que acaba de salir la version | 1.6.1 (el 21/12/2007). ¿Es posible que todavia estemos a tiempo de | incluirla en la R3 (CD o DVD)? Si: si alguien lo compila y funciona bien (tener en cuenta que pretendemos hacer una versión estable de Musix) | Ademas he visto que en la seccion de "binarios" Nombran a Musix como | una de las distros que lleva Rosegarden... Pero en el detalle de la | pagina, no aparece ni el Logo de la distro ni un link y si que aparecen | otras distros... Creo que estaria bien enviarles esta info para que nos | incluyan... Lo podeis ver aqui: | | http://www.rosegardenmusic.com/getting/ Gracias, justo ayer vi que mencionaban a Musix, como a 64studio, en el sentido de que son distros que compilan kernels realtime y por tal razón esos kernels pueden ser utilizados en Debian "Note: Rosegarden benefits greatly from running on a system that is well tuned for audio and low-latency use. Many distributions have at least one specialised low-latency kernel package available via some sort of additional multimedia distribution or repository; consider using one of these. For example, Ubuntu -> Ubuntu Studio; Debian -> 64 Studio or Musix; Fedora -> PlanetCCRMA; OpenSUSE -> JAD. In most cases the choice of a multimedia distribution will make no difference to which version of Rosegarden you can use: it will affect the type of Linux kernel and other audio services available, and consequently how well Rosegarden will run." Pero es lógico que no deseen nombrar a 64studio o Musix como distros que traen Rosegarden, dado que compiten con SU distro Studio to go!, que es lo mismo que Musix nada más que con la última versión de Rosegarden y algunos componentes más (software propietario y algo más que no tengo idea ahora.) Por lo cual, yo diría de dejarlos en paz :-D | Salud y suerte!!!! | _________________________________________________________________ | Tecnología, moda, motor, viajes,…suscríbete a nuestros boletines para | estar siempre a la última | http://newsletters.msn.com/hm/maintenanceeses.asp?L=ES&C=ES&P=WCMaintenanc |e&Brand=WL&RU=http%3a%2f%2fmail.live.com -- `&' # Marcos Guglielmetti, co-director de # Musix GNU+Linux, 100% Software Libre para artistas _#_ http://www.musix.org.ar (#) / O \ + archivos: ftp://musix.ourproject.org/pub/musix ( === ) Ecología: http://autosus.wordpress.com `---' Personal: http://marcospcmusica.wordpress.com Leela: "Fry, tenemos un paquete que entregar..." Fry: "¡Lo tiramos por una alcantarilla y decimos que lo hemos entregado!" Bender: "Mucho trabajo... ¡Mejor quemarlo y decir que lo hemos tirado!" http://es.wikiquote.org/wiki/Futurama

1 0