Saludos.
He probado algunos scripts de musix en opensuse 64bits (soy travieso),
y funcionan bien. Convertir midi a audio, y otros. El problema es que
opensuse no es para músicos, y algunos programas debo instalarlos a
pie. Lógico.
Reportes: Probando musix 0.49:
Tengo el mismo problema de reconociemiento de impresoras: cupsys no
está trabajando bien en la instalación tipo debian o knoppix. Marcos
dice que esto es muy complejo, pero creo que debo reportarlo de nuevo.
Instalé igual que el disco live y la impresora sí corre bien. Ahora el
modem no se bloquea.
Rosegarden no da el aviso de System timer resolution is too low.
Cambio y fuera...
*************
PCINFO:
CPU0
0: 2928289 IO-APIC-edge timer
1: 1790 IO-APIC-edge i8042
2: 0 XT-PIC cascade
8: 5 IO-APIC-edge rtc
12: 118863 IO-APIC-edge i8042
14: 34425 IO-APIC-edge ide0
15: 24 IO-APIC-edge ide1
16: 4 IO-APIC-level ohci1394
17: 102490 IO-APIC-level bttv0
19: 29918 IO-APIC-level EMU10K1
21: 210499 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5
NMI: 0
LOC: 2928131
ERR: 0
MIS: 0
_________________________________________
CPUINFO
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 12
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 0
cpu MHz : 2200.139
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext
3dnow lahf_lm ts fid vid ttp
bogomips : 4405.78
_________________________________________
snd-page-alloc
pages : 58101760 bytes (14185 pages per 4kB)
_________________________________________
MEMINFO
_________________________________________
Placas de sonido reconocidas
por el sistema
_________________________________________
cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - Audigy 2 Platinum [SB0240P]
Audigy 2 Platinum [SB0240P] (rev.4,
serial:0x10021102) at 0xe800, irq 19
cat /proc/isapnp >>/tmp/pcinfo.txt
_________________________________________
HWSETUP
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: Advanced Micro Devices [AMD]|K8 NorthBridge
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: Advanced Micro Devices [AMD]|K8 NorthBridge
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: Advanced Micro Devices [AMD]|K8 NorthBridge
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: Advanced Micro Devices [AMD]|K8 NorthBridge
---
class: OTHER
bus: PCI
device: (null)
driver: i2c-viapro
desc: Unknown vendor|Generic i2c-viapro device
---
class: OTHER
bus: PCI
device: (null)
driver: pata_via
desc: VIA Technologies|VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235
PIPC Bus Master IDE
---
class: OTHER
bus: PCI
device: (null)
driver: emu10k1-gp
desc: Creative Labs|SB Audigy MIDI/Game port
---
class: OTHER
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: VIA Technologies|unknown device 1106:b188
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: 600DPI USB Scanner
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.16-beyond4.1 ehci_hcd EHCI Host Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: Linux 2.6.16-beyond4.1 uhci_hcd UHCI Host Controller
---
class: OTHER
bus: PCI
device: (null)
driver: unknown
desc: VIA Technologies|unknown device 1106:3188
---
class: OTHER
bus: USB
device: (null)
driver: unknown
desc: unknown
---
class: NETWORK
bus: PCI
device: eth
driver: r8169
desc: Realtek|RTL-8169
write config(/etc/sysconfig/netcard)
update config(/etc/sysconfig/knoppix)
---
class: MOUSE
bus: PSAUX
device: psaux
driver: msintellips/2
desc: Generic PS/2 Wheel Mouse
write config(/etc/sysconfig/mouse)
update config(/etc/sysconfig/knoppix)
symlink(/dev/psaux,/dev/mouse)
---
class: AUDIO
bus: PCI
device: (null)
driver: emu10k1
desc: Creative Labs|SB Audigy
write config(/etc/sysconfig/sound)
update config(/etc/sysconfig/knoppix)
---
class: CDROM
bus: IDE
device: hdc
driver: ignore
desc: HL-DT-ST DVDRAM GSA-4040B
symlink(/dev/hdc,/dev/cdrom)
---
class: CDROM
bus: IDE
device: hdd
driver: ignore
desc: LITE-ON DVDRW SHW-160P6S
symlink(/dev/hdd,/dev/cdrom1)
---
class: VIDEO
bus: PCI
device: (null)
driver: Server:XFree86(nv)
desc: Vanta [NV6]
write config(/etc/sysconfig/xserver)
update config(/etc/sysconfig/knoppix)
---
class: FLOPPY
bus: UNKNOWN
device: fd0
driver: unknown
desc: 3.5" 1.44MB floppy drive
write config(/etc/sysconfig/floppy)
update config(/etc/sysconfig/knoppix)
---
class: HD
bus: IDE
device: hda
driver: ignore
desc: ST380011A
---
class: HD
bus: IDE
device: hdb
driver: ignore
desc: ST3120022A
---
class: PRINTER
bus: USB
device: (null)
driver: unknown
desc: Seiko Epson Corp. Stylus Printer
---
class: CAPTURE
bus: PCI
device: (null)
driver: bttv
desc: Brooktree Corporation|Bt878
---
class: USB
bus: PCI
device: (null)
driver: ehci-hcd
desc: VIA Technologies|USB 2.0
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: USB
bus: PCI
device: (null)
driver: usb-uhci
desc: VIA Technologies|USB
---
class: UNKNOWN
bus: PCI
device: (null)
driver: ohci1394
desc: Unknown vendor|unknown device 1102:4001
_________________________________________
ESPACIO_USADO_LIBRE
S.ficheros Tamaño Usado Disp Uso% Montado en
/dev/hdb8 8,9G 1,7G 7,2G 20% /
tmpfs 506M 0 506M 0% /dev/shm
_________________________________________
Modulos ALSA cargados
snd_rtctimer 3468 0
snd_emu10k1_synth 6656 0
snd_emux_synth 31616 1 snd_emu10k1_synth
snd_seq_virmidi 6912 1 snd_emux_synth
snd_seq_midi_emul 5888 1 snd_emux_synth
snd_seq_dummy 3844 0
snd_seq_oss 30052 0
snd_seq_midi 8096 0
snd_seq_midi_event 6912 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 45644 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_emu10k1 103588 5 snd_emu10k1_synth
snd_rawmidi 22944 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1
snd_ac97_codec 83360 1 snd_emu10k1
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm_oss 36512 0
snd_mixer_oss 16512 1 snd_pcm_oss
snd_pcm 75656 5 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq_device 8076 8
snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi
snd_timer 21124 4 snd_rtctimer,snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 9608 2 snd_emu10k1,snd_pcm
snd_util_mem 4608 2 snd_emux_synth,snd_emu10k1
snd_hwdep 8836 2 snd_emux_synth,snd_emu10k1
snd 49024 21
snd_rtctimer,snd_emux_synth,snd_seq_virmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
soundcore 9312 3 emu10k1,sound,snd
_________________________________________
Modulos OSS cargados
sound 70416 1 emu10k1
soundcore 9312 3 emu10k1,sound,snd
_________________________________________
________________VIDEO______________________
________________Xorg________________________
Section "ServerLayout"
Identifier "Xorg Configurado"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
#otras opciones para layout pueden ser "es" (, teclado latinoamericano
estandar Ñ en los :, ' genera acentos...)
#"us_intl" (' genera acentos, META+5 ->euro, etc).
#us: teclado windoze estandar, WIN_L/R -> Super_L/R (Mod 4). [Alt_L/R
-> Alt y Meta]_L/R (Mod 1)
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "KDS"
ModelName "KDS1745"
HorizSync 30 - 70 # DDC-probed
VertRefresh 50 - 160 # DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
+hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
ModeLine "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509 -hsync -vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814
-HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907
-HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915
-HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001
-HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002
-HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017
-HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028
1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054
1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054
1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054
1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054
1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054
1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204
1271 -HSync +Vsync
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52; pclk: 193.16 MHz
Modeline "1920x1200" 193.16 1920 2048 2256 2592 1200 1201 1204 1242
-HSync +HSync
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nv"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
_________________________________________
______________errores de video________________
Xsession: X session started for root at dom jul 2 07:29:05 CEST 2006
Configurando el teclado en Entorno Gráfico en español
menu "Texto-Oficina" folder {
menu "Oficina" folder {
IceWM: using /root/.icewm for private configuration files
icewmtray: using /root/.icewm for private configuration files
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
sox: Can't open output file '/dev/dsp': No such device
IceWM: Atención: Deprecated option: warpPointer == true
IceWM: Atención: Deprecated option: showPopupsAbovePointer == true
IceWM: Atención: Deprecated option: sizeMaximized == true
IceWM: Opción de ventana desconocida: onTop
IceWM: Atención: Deprecated option: "ignoreWinlist windowoption"
kbuildsycoca running...
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/gnome_wave_cleaner.xpm"
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/gnome_wave_cleaner.xpm"
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/gnome_wave_cleaner.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/gnome_wave_cleaner.xpm"
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/jack-rack.xpm"
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/jack-rack.xpm"
IMLIB ERROR: Cannot load image: /usr/share/pixmaps/jack-rack.xpm
All fallbacks failed.
See /usr/share/doc/imlib2/README.fallback.
IceWM: Atención: Error en la carga de la imagen
"/usr/share/pixmaps/jack-rack.xpm"
This is xawtv-3.94, running on Linux/i686 (2.6.16-beyond4.1)
This is xdtv 2.3.2 running on Linux/i686 (2.6.16-beyond4.1).
scandir: No existe el fichero o el directorio
filename = /root/.xdtv/xdtvrc
/root/.xdtv/xdtvrc:14: invalid value for fullscreen_mode: old
WARNING: xdtv_v4l-conf is compiled without DGA support.
wmhooks: netwm detected
wmhooks: netwm state above supported
wmhooks: netwm fullscreen supported
wmhooks: gnome detected
Selected XvImage adaptor with yuyv support: NV Video Blitter on port
65 (grabdisplay)
No XvVideo port available.
*** AUDIO DEVICE TYPE = alsa
*** GRABBER DEVICE TYPE = v4l2
*** MIXER DEVICE TYPE = alsa
MMX, SSE, AMD MMX extensions, SSE2, 3DNOW, have been detected.
Method sse
IceWM: APP BUG? mapRequest for window 8013CB sent to destroyed frame 1400184!
libkonq: WARNING: Could not load wallpaper
/root/.kde/share/apps/kthememanager/themes/Musix/wallpapers/konqueror/kde4ever.png
kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle
'/etc/samba/smb.conf'
kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle
'/etc/security/fileshare.conf'
kio (KDirWatch): WARNING: KDirWatch::removeDir can't handle '/etc/exports'
sending IMStart with 0 chars to 0x81441a8
sending IMEnd with 1 chars to 0x81441a8, text=á
sending IMStart with 0 chars to 0x81441a8
sending IMEnd with 1 chars to 0x81441a8, text=é
sending IMStart with 0 chars to 0x81441a8
sending IMEnd with 1 chars to 0x81441a8, text=ó
Opener: received SetSecret
Opener: received SetSecret
Opener: received OpenLock
Opener: received OpenDevice
Opener: received ExecPPPDaemon
In parent: pppd pid 11321
Couldn't find interface ppp0: No existe tal dispositivo
Kernel supports ppp alright.
Couldn't find interface ppp0: No existe tal dispositivo
Couldn't find interface ppp0: No existe tal dispositivo
Couldn't find interface ppp0: No existe tal dispositivo
Opener: received OpenResolv
Opener: received RemoveSecret
Opener: received RemoveSecret
Extension System Warning: Failed to set up default extensions files
probably because you do not have write privileges to this location.
While you can run Firefox like this, it is recommended that you run it
at least once with privileges that allow it to generate these initial
files to improve start performance. Running from a disk image on MacOS
X is not recommended.Opener: received KillPPPDaemon
In killpppd(): Sending SIGTERM to 11321
Opener: received RemoveSecret
Opener: received RemoveSecret
Opener: received OpenResolv
Opener: received OpenResolv
Opener: received RemoveLock
jackd 0.101.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw|hw|2048|2|44100|0|0|nomon|swmeter|-|32bit
configuring for 44100Hz, period = 2048 frames, buffer = 2 periods
Note: audio device hw doesn't support a 32bit sample format so JACK
will try a 24bit format instead
Note: audio device hw doesn't support a 24bit sample format so JACK
will try a 16bit format instead
nperiods = 2 for capture
Note: audio device hw doesn't support a 32bit sample format so JACK
will try a 24bit format instead
Note: audio device hw doesn't support a 24bit sample format so JACK
will try a 16bit format instead
nperiods = 2 for playback
PluginFactory::instance(dssi): creating new DSSIPluginFactory
[/root/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi]
WARNING: DSSIPluginFactory::discoverPlugins: couldn't dlopen
/usr/lib/dssi/fluidsynth-dssi.so - libjack-0.80.0.so.0: no se puede
abrir el fichero del objeto compartido: No existe el fichero o el
directorio
PluginFactory::instance(ladspa): creating new LADSPAPluginFactory
[/root/.ladspa] [/usr/local/lib/ladspa] [/usr/lib/ladspa]
Rosegarden 4-1.2.3 - AlsaDriver - alsa-lib version 1.0.10
JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 2048
JackDriver::initialiseAudio - creating disk thread
JackDriver::initialiseAudio - found 2 JACK physical outputs
JackDriver::initialiseAudio - connecting from "rosegarden:master out
L" to "alsa_pcm:playback_1"
JackDriver::initialiseAudio - connecting from "rosegarden:master out
R" to "alsa_pcm:playback_2"
JackDriver::initialiseAudio - found 2 JACK physical inputs
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to
"rosegarden:record in 1 L"
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to
"rosegarden:record in 1 R"
JackDriver::initialiseAudio - initialised JACK audio subsystem
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2,
ptype 2, cap 99]
16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX)
[ctype 2, ptype 2, cap 127]
16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype
2, ptype 2, cap 127]
17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
CREATED OUTPUT PORT 3:out 1 - MIDI output system device for device 0
Connecting my port 3 to 16:0 on initialisation
done
Creating device 0 in Play mode for connection 16:0 Audigy MPU-401
(UART) (duplex)
Default device name for this device is MIDI output system device
Creating device 1 in Record mode for connection 16:0 Audigy MPU-401
(UART) (duplex)
Default device name for this device is MIDI input system device
CREATED OUTPUT PORT 4:out 2 - MIDI output system device 2 for device 2
Connecting my port 4 to 16:32 on initialisation
done
Creating device 2 in Play mode for connection 16:32 Audigy MPU-401 #2 (duplex)
Default device name for this device is MIDI output system device 2
Creating device 3 in Record mode for connection 16:32 Audigy MPU-401 #2 (duplex)
Default device name for this device is MIDI input system device 2
CREATED OUTPUT PORT 5:out 3 - MIDI output system device 3 for device 4
Connecting my port 5 to 17:0 on initialisation
done
Creating device 4 in Play mode for connection 17:0 Emu10k1 Port 0 (write)
Default device name for this device is MIDI output system device 3
CREATED OUTPUT PORT 6:out 4 - MIDI output system device 4 for device 5
Connecting my port 6 to 17:1 on initialisation
done
Creating device 5 in Play mode for connection 17:1 Emu10k1 Port 1 (write)
Default device name for this device is MIDI output system device 4
CREATED OUTPUT PORT 7:out 5 - MIDI output system device 5 for device 6
Connecting my port 7 to 17:2 on initialisation
done
Creating device 6 in Play mode for connection 17:2 Emu10k1 Port 2 (write)
Default device name for this device is MIDI output system device 5
CREATED OUTPUT PORT 8:out 6 - MIDI output system device 6 for device 7
Connecting my port 8 to 17:3 on initialisation
done
Creating device 7 in Play mode for connection 17:3 Emu10k1 Port 3 (write)
Default device name for this device is MIDI output system device 6
CREATED OUTPUT PORT 9:out 7 - MIDI output system device 7 for device 8
done
Creating device 8 in Play mode for connection 14:0 Midi Through Port-0
(duplex) (not connecting)
Default device name for this device is MIDI output system device 7
Creating device 9 in Record mode for connection 14:0 Midi Through
Port-0 (duplex) (not connecting)
Default device name for this device is MIDI input system device 3
AlsaDriver::setCurrentTimer((auto))
Current timer set to "system timer" with timer checks
AlsaDriver::initialiseMidi - initialised MIDI subsystem
AlsaDriver::setCurrentTimer((auto))
Current timer set to "system timer" with timer checks
SoundDriver::getMappedDevice(0) - name = "MIDI output system device"
type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "MIDI output system device 2"
type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "MIDI output system device 3"
type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "MIDI output system device 4"
type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "MIDI output system device 5"
type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2 (write)"
recording = 0
SoundDriver::getMappedDevice(7) - name = "MIDI output system device 6"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "MIDI output system device 7"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "Soft synth connection" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "Audio connection" recording = 0
Renaming device 0 to General MIDI Device
Renaming device 2 to MIDI soundcard synth 2
Renaming device 4 to MIDI soundcard synth 3
Renaming device 5 to MIDI soundcard synth 4
Renaming device 6 to MIDI external device
Renaming device 7 to Nuevo Dispositivo
Renaming device 8 to Nuevo Dispositivo
AlsaDriver::setPlausibleConnection: connection like 65:0 Emu10k1 Port
0 (write) requested for device 0
AlsaDriver::setPlausibleConnection: nothing suitable available
Renamed 128:3 to General MIDI Device
AlsaDriver::setPlausibleConnection: connection like 65:1 Emu10k1 Port
1 (write) requested for device 2
AlsaDriver::setPlausibleConnection: nothing suitable available
Renamed 128:4 to MIDI soundcard synth 2
AlsaDriver::setPlausibleConnection: connection like 65:2 Emu10k1 Port
2 (write) requested for device 4
AlsaDriver::setPlausibleConnection: nothing suitable available
Renamed 128:5 to MIDI soundcard synth 3
AlsaDriver::setPlausibleConnection: connection like 65:3 Emu10k1 Port
3 (write) requested for device 5
AlsaDriver::setPlausibleConnection: nothing suitable available
Renamed 128:6 to MIDI soundcard synth 4
AlsaDriver::setPlausibleConnection: connection like 64:0 EMU10K1
MPU-401 (UART) (duplex) requested for device 6
AlsaDriver::setPlausibleConnection: nothing suitable available
Renamed 128:7 to MIDI external device
Renamed 128:8 to Nuevo Dispositivo
Renamed 128:9 to Nuevo Dispositivo
CREATED OUTPUT PORT 10:out 8 for device 12
Creating device 12 in Play mode -- no connection available
Default device name for this device is Anonymous MIDI device 1
Renaming device 12 to Nuevo Dispositivo
Renamed 128:10 to Nuevo Dispositivo
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
(duplex)" recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
(write)" recording = 0
SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "Soft synth connection" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "Audio connection" recording = 0
SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
rosegarden: could not connect to socket
rosegarden: No such file or directory
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
(duplex)" recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
(write)" recording = 0
SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "Soft synth connection" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "Audio connection" recording = 0
SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
AlsaDriver::setRecordDevice - successfully subscribed device 9 as record port
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 1
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
AudioPlayQueue::~AudioPlayQueue()
JackDriver::stopTransport: resetting m_haveAsyncAudioEvent
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 2
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2,
ptype 2, cap 99]
16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX)
[ctype 2, ptype 2, cap 127]
16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype
2, ptype 2, cap 127]
17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
type = 0 direction = 0 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
(duplex)" recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
(write)" recording = 0
SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "" recording = 0
SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
record port
AudioPlayQueue::~AudioPlayQueue()
Disconnecting my port 3 from 16:0 on reconnection
Connecting my port 3 to 17:0 on reconnection
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
(duplex)" recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
(write)" recording = 0
SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "" recording = 0
SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
record port
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1400727
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2,
ptype 2, cap 99]
16,0 - (Audigy MPU-401 #2, Audigy MPU-401 (UART)) (DUPLEX)
[ctype 2, ptype 2, cap 127]
16,32 - (Audigy MPU-401 #2, Audigy MPU-401 #2) (DUPLEX) [ctype
2, ptype 2, cap 127]
17,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
17,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2,
ptype 2078, cap 66]
SoundDriver::getMappedDevice(0) - name = "out 1 - General MIDI Device"
type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(1) - name = "MIDI input system device"
type = 0 direction = 1 connection = "16:0 Audigy MPU-401 (UART)
(duplex)" recording = 0
SoundDriver::getMappedDevice(2) - name = "out 2 - MIDI soundcard synth
2" type = 0 direction = 0 connection = "16:32 Audigy MPU-401 #2
(duplex)" recording = 0
SoundDriver::getMappedDevice(3) - name = "MIDI input system device 2"
type = 0 direction = 1 connection = "16:32 Audigy MPU-401 #2 (duplex)"
recording = 0
SoundDriver::getMappedDevice(4) - name = "out 3 - MIDI soundcard synth
3" type = 0 direction = 0 connection = "17:0 Emu10k1 Port 0 (write)"
recording = 0
SoundDriver::getMappedDevice(5) - name = "out 4 - MIDI soundcard synth
4" type = 0 direction = 0 connection = "17:1 Emu10k1 Port 1 (write)"
recording = 0
SoundDriver::getMappedDevice(6) - name = "out 5 - MIDI external
device" type = 0 direction = 0 connection = "17:2 Emu10k1 Port 2
(write)" recording = 0
SoundDriver::getMappedDevice(7) - name = "out 6 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "17:3 Emu10k1 Port 3 (write)"
recording = 0
SoundDriver::getMappedDevice(8) - name = "out 7 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(9) - name = "MIDI input system device 3"
type = 0 direction = 1 connection = "" recording = 0
SoundDriver::getMappedDevice(10) - name = "Synth plugin" type = 2
direction = 0 connection = "" recording = 0
SoundDriver::getMappedDevice(11) - name = "Audio" type = 1 direction =
0 connection = "" recording = 0
SoundDriver::getMappedDevice(12) - name = "out 8 - Nuevo Dispositivo"
type = 0 direction = 0 connection = "" recording = 0
AlsaDriver::setRecordDevice - 255:255 failed to subscribe device 9 as
record port
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 3
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
AudioPlayQueue::~AudioPlayQueue()
JackDriver::stopTransport: resetting m_haveAsyncAudioEvent
RosegardenSequencerApp::isTransportSyncComplete: token 0, current token 4
Launched ok, pid = 11581
OggS-SEEK: at 0 want 78328 got 68160 (diff-requested 78328)
OggS-SEEK: at 78400 want 520 got 0 (diff-requested -77880)
AudioPlayQueue::~AudioPlayQueue()
Warning: Composition::~Composition() with 2 observers still extant
Observers are: 0x89f9758 0x8e651c8
subgraph starting at rosegarden timed out (subgraph_wait_fd=7, status
= 0, state = Triggered)
**** alsa_pcm: xrun of at least 453.013 msecs
TERM environment variable not set.
cat: /proc/isapnp: No existe el fichero o el directorio
_________________________________________
Linux Musix 2.6.16-beyond4.1 #1 PREEMPT Sun May 28 09:01:14 EEST 2006
i686 GNU/Linux
___________opciones de inicio del kernel:________________
root=/dev/hdb8 ro dma ramdisk_size=100000 init=/etc/init lang=es
apm=power-off nomce quiet alsa dma vga=normal
