i am not sure that i am not seeing the same sort of thing. i definitely get some freezing. i have been warned about the on board video that i have and i am going to buy an AGP card to see if that might fix the symptom but being a emc-novice, i do not know what to expect or if it will fix the problem or if at all related. djs Craig Gadd wrote:
Hello Paul,
I'm having a problem with my BDI setup and was hoping that you might have some advice on a problem I have. I'm running BDI 4.51 with a Motenc Lite Card installed. The card is connected through a 50 pin ribbon cable to a Vital Systems breakout board which in turn has been wired to a single encoder which has 20,000 quad/cts per revolution).
When I launch the generic.run, or emc.run things seem to behave normally with the units showing for the axis which has the encoder on it. The units will update if I turn the motor slowly, and everything seems to work. When I spin the motor quickly however, the unit display of the axis seems to "freeze" and will not recover. The rest of the interface continues to function properly though. Any ideas on what might cause this and how I might fix it? I've tried Tkemc,Xemc, and mini but they all seem to behave the same.
Thanks,
Craig
_______________________________________________ Bdi4emc-help mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help