Paul, I never thought of this possibility, mainly because I wanted to make operation of the machine not requiring any manual input. I also looked at HAL concept. It looks that to master it I have to enroll on at least 6 month course in a college. But I just remembered, I have Jon Elson's add on card, which I purchased 3 years ago but never had a chance to try. How hard is it to make it going with EMC? Alex Paul wrote:
Hi Alex
On Sunday 03 December 2006 21:18, alex wrote:
I need to have 3 axes homed. Is it possible with present setup?
Yes, you can have all three homed. Each axis will need to be homed separately and moved off the home switch before the next can be homed. If one axis is not fitted with a home switch, then the postition would need to be zero'd manually each time you power the system up as EMC wouldn't have a fixed reference point to work from.
Regards, Paul.
_______________________________________________ Bdi4emc-help mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help