Hi Jeff,
<approx> it sounds like emc1 pulsing has some kind of ringing when running constant speed <jepler> what step rates are you trying to attain? <approx> I have 1333 steps/mm . ringing occurs when running over 10mm/s
That's cool. I've imagined that freqmod must produce an audible tone around 1KHz when you run it too fast.
I first suggested that he try "quickstep", but then I couldn't figure out which version(s) of the emc-modules package have quickstep. My bdi test machine has "emc-modules-2.6.12.6-magma+bdi.102" and apt-get doesn't report any newer version is available. But that package doesn't have a "quickstep.o". [...] Is this an error on my end, or is the ourproject.org apt repository not set up to permit use of apt-file?
I know little about all the deb stuff, but I can tell you that: You need these in your apt sources: deb http://bdi4emc.ourproject.org/debian/ sarge extras non-free deb-src http://bdi4emc.ourproject.org/debian/ sarge extras non-free The package is emc-modules-2.6.12.6-rtai. It depends on newer RTAI stuff that you probably don't have installed yet. The correct version lists the source as emc 1.0-40 The module filename is "quickstep.ko" The first version of quickstep was in an earlier package, but you really want to use the newest one. In addition to the original quickstep functionality, it has: - support for quadrature drives as well as step/dir - acceleration-limited backlash compensation - the cool new trajectory planner with blend error limits and 200 move lookahead to avoid needless decelerations. All that stuff is missing from any earlier released version. -- Matt