please tell me witch type of interface card required for full closed loop? shabbir [email protected] wrote: Send Bdi4emc-help mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit https://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Bdi4emc-help digest..." Today's Topics: 1. Re: EMC (Paul) ---------------------------------------------------------------------- Message: 1 Date: Sun, 2 Sep 2007 20:50:59 +0100 From: Paul Subject: Re: [Bdi4emc-help] EMC To: "Help and advice for BDI-4 users." Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" Hi Shabbir On Sunday 02 September 2007 06:26, moghul shabbir wrote:
PLEASE TELL ME IN DETAIL ABOUT EMC? IS EMC FULL CLOSE LOOP SYSTEM TO SOFTWARE ?
Please, don't type everything in capitals... Yes, EMC can be used as a full closed loop system with suitable encoders and interface card - The motors can be either DC servos or stepper motors, although to run closed loop with steppers, you would need to make a few small changes to the code (which is readily available). Depending on the interface cards used, you can run up to six axis of simultaneous coordinated motion. If you have any further specific questions, do not hesitate to ask. Regards, Paul. ------------------------------ _______________________________________________ Bdi4emc-help mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help End of Bdi4emc-help Digest, Vol 17, Issue 2 ******************************************* --------------------------------- Pinpoint customers who are looking for what you sell.