Hi Alex On Friday 01 December 2006 13:22, alex wrote:
I was able to install latest BDI with great success! I have a 4 axis machine, a punch press. All axes are linear. How do I set up an ini file, were can i find a manual for this? Can I use a sherline inch EMC - it looks great!
You will find a number of pdf documents in the Documents directory on the CD. These are a little out of date unfortunately, but they should cover most of the basics. Starting with a working ini file is always a good plan - The scale settings would be the first parameters to change, as these probably won't match your machine(s).. After that, the min & max limits, velocities, and accelerations can be adjusted. Much of the tuning is trial and error I'm afraid. Regards, Paul.