[Solar-tecnica] ipv6

Fernando Toledo ftoledo en docksud.com.ar
Lun Nov 7 04:26:33 CET 2005


si veo porque sirve para usarlo atras de nat. interesante
de todas formas la configuracion que estoy probando es como anonimo y va de 
10:
fijate que tengas soporte del tunel universal en el kernel "modprobe tun"

auth_method=any
client_v4=auto
userid=anonymous
passwd=
template=setup
server=anon.freenet6.net
retry_delay=30
tunnel_mode=v6anyv4
if_tunnel_v6v4=sit1
if_tunnel_v6udpv4=tun
proxy_client=no
keepalive=yes
keepalive_interval=30

mi direccion actual es esta:
 inet6 addr: 2001:5c0:8fff:ffff::13/128

deberias poder hacer un ping6 
ntbkragnarok:/etc/tsp# ping6 www.ututo.org.ar
PING www.ututo.org.ar(ututo-pt.tunnel.tserv1.fmt.ipv6.he.net) 56 data bytes
64 bytes from ututo-pt.tunnel.tserv1.fmt.ipv6.he.net: icmp_seq=4 ttl=56 
time=610 ms
64 bytes from ututo-pt.tunnel.tserv1.fmt.ipv6.he.net: icmp_seq=5 ttl=56 
time=851 ms
64 bytes from ututo-pt.tunnel.tserv1.fmt.ipv6.he.net: icmp_seq=6 ttl=56 
time=607 ms

--- www.ututo.org.ar ping statistics ---
7 packets transmitted, 3 received, 57% packet loss, time 6017ms
rtt min/avg/max/mdev = 607.800/689.644/851.066/114.148 ms
ntbkragnarok:/etc/tsp# ping6 www.kame.net
PING www.kame.net(orange.kame.net) 56 data bytes
64 bytes from orange.kame.net: icmp_seq=1 ttl=49 time=540 ms
64 bytes from orange.kame.net: icmp_seq=2 ttl=49 time=678 ms

--- www.kame.net ping statistics ---
3 packets transmitted, 2 received, 33% packet loss, time 2004ms
rtt min/avg/max/mdev = 540.484/609.535/678.586/69.051 ms
ntbkragnarok:/etc/tsp# 


El Lun 07 Nov 2005 00:05, Martin Lima escribió:
> mira, yo uso freenet6, para debien tenes un paquete que es el tspc o
> freenet6 (no hay como el apt!)
> la eth0 la tengo por dhcp a fiber y la eth1 la uso para darle conexion a
> las otras maquinolas.
> Ahora meti un dhcp para compartir la red, porque hasta ahora lo mando a
> mano, asi me asigna bien un ipv6 a la eth1, pero tengo que configurar los
> clientes, jeje, un quilombo como veras.
> sobre todo para meter ipv6 en un guin (no tengo la mas puta idea de como
> hacerlo) jeje
>
> eth0 Link encap:Ethernet HWaddr 00:48:54:1F:BC:53
> inet addr:24.232.233.112 <http://24.232.233.112>
> Bcast:255.255.255.255<http://255.255.255.255>Mask:
> 255.255.255.0 <http://255.255.255.0>
> inet6 addr: fe80::248:54ff:fe1f:bc53/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:24486824 errors:0 dropped:0 overruns:0 frame:0
> TX packets:407442 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:1960748975 (1.8 GiB) TX bytes:60798288 (57.9 MiB)
> Interrupt:17 Base address:0xec00
>
> eth1 Link encap:Ethernet HWaddr 00:48:54:1F:E0:83
> inet addr:10.0.0.55 <http://10.0.0.55>
> Bcast:10.255.255.255<http://10.255.255.255>Mask:
> 255.0.0.0 <http://255.0.0.0>
> inet6 addr: fe80::248:54ff:fe1f:e083/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:336789 errors:0 dropped:0 overruns:0 frame:0
> TX packets:461067 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:44199274 (42.1 MiB) TX bytes:488098113 (465.4 MiB)
> Interrupt:18 Base address:0xe800
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 <http://127.0.0.1> Mask:255.0.0.0 <http://255.0.0.0>
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:37056 errors:0 dropped:0 overruns:0 frame:0
> TX packets:37056 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:2793691 (2.6 MiB) TX bytes:2793691 (2.6 MiB)

-- 
http://www.docksud.com.ar
telnet://bbs.docksud.com.ar

* Obtene Firefox - http://www.getfirefox.com *
------------ próxima parte ------------
Se ha borrado un mensaje que no está en formato texto plano...
Nombre     : no disponible
Tipo       : application/pgp-signature
Tamaño     : 189 bytes
Descripción: no disponible
Url        : /pipermail/solar-tecnica/attachments/20051107/7c7ea66a/attachment.pgp


Más información sobre la lista de distribución Solar-tecnica