[Forticsl-progetto] It helps when setting up the system to temporarily connect the CCTV camera to a television monitor.

Ninette B. Curtis nbrs at trueidentity.nl
Fri Jan 5 14:03:44 CET 2007


cid:part1.04030502.08020708 at maelok.nl
For instance if the manual says that DTR is an output then the instrument should be a computer type.
Any other use is outside of the standard. html for noteson how to display the news on your own web site, read it via e-mail or through a newsfeed viewer. To find out the communication settings use Control Panel's Device Manager as detailed in point 3 above.
HampshirePermanentInstallation Project Manager -. In the eTire system, the measurements taken by the sensor are read at the vehicle's depot or a drive-by unit by a hand-held device that retrieves the data automatically. This is not always so: look at the computer's actual COM ports physically available and you may find a lower port number. The software can also perform calculations on the counts.
The Windmill program successively opened for a fixed time interval one of the six solenoid valves sampling the air in the tunnels.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: aren't.gif
Type: image/gif
Size: 12615 bytes
Desc: not available
Url : /pipermail/forticsl-progetto/attachments/20070105/d36ae024/arent.gif


More information about the Forticsl-progetto mailing list