Bryan Bishop <kanzure@gmail.com> Sep 19 03:16PM -0500
^
---------- Forwarded message ----------
From: Bruce Perens <bruce@perens.com>
Date: Mon, Sep 19, 2011 at 3:06 PM
Subject: [OH Updates] TAPR meeting results
To: updates@lists.openhardwaresummit.org
We had the TAPR meeting this weekend in Baltimore, after the Summit.
TAPR will deprecate the Non-Commercial License and will immediately apply
the Open Hardware License to new work funded by TAPR.
We had previously used the Non-Commercial License to make sure we would
recoup the investment in our first production run of the TAPR-funded
http://openhpsdr.org/ boards. After that sold out, we applied the Open
Hardware License. History in producing these boards shows that the NCL is
not necessary to protect our revenue, and nobody ever turns the boards to
add the OHL statement when it's time to do that. Boards after
Hermes<http://openhpsdr.org/hermes.php>will include the OHL statement.
Hermes will include the OHL statement in
addendum, as the board has already been laid out.
We had a short discussion of whether we should remove some of the
requirements in the TAPR Open Hardware License in order to get more parties
to use the TAPR license. This was countered by concern among the leadership
about the rather low standard for "open" in the Open Hardware community in
general right now. They pointed out:
- Some of the things featured at the Summit don't meet the Open Hardware
Definition.
- Some companies that are thought to be leaders in Open Hardware
predominantly make breakout boards for ICs, with little design investment in
them.
- A lot of things said to be open just have a PDF for the schematic, no
modifiable design files, and no gerber files.
So, the feeling at TAPR is that we should work to raise the standard for
"open" in the community.
We're going to invest some funds in promoting the high design investment
projects which have to a great extent been overlooked.
Thanks
Bruce
_______________________________________________
updates mailing list
updates@lists.openhardwaresummit.org
http://lists.openhardwaresummit.org/listinfo.cgi/updates-openhardwaresummit.org
--
- Bryan
http://heybryan.org/
1 512 203 0507
John Griessen <john@industromatic.com> Sep 19 05:19PM -0500
^
On 09/19/2011 03:16 PM, Bryan Bishop forwarded:
From: Bruce Perens <bruce@perens.com>
Date: Mon, Sep 19, 2011 at 3:06 PM
> investment in them.
> * A lot of things said to be open just have a PDF for the schematic, no modifiable design files, and no gerber files.
> So, the feeling at TAPR is that we should work to raise the standard for "open" in the community.
I thought the same thing. It's good to hear this.
--
You received this message because you are subscribed to the Google Groups "Open Manufacturing" group.
To post to this group, send email to openmanufacturing@googlegroups.com.
To unsubscribe from this group, send email to openmanufacturing+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/openmanufacturing?hl=en.
--
P2P Foundation: http://p2pfoundation.net - http://blog.p2pfoundation.net
Connect: http://p2pfoundation.ning.com; Discuss: http://lists.ourproject.org/cgi-bin/mailman/listinfo/p2p-foundation