RE: Re: Donde está alsa .conf y donde poner .asoundrc (Daniel Vidal)
Saludos Daniel y compas! gracias
Saludos
Para eliminar el error del musixuser tienes que editar el fichero /etc/kde3/kdm/kdmrc y comentar y/o configurar las lineas siguientes.
AutoLoginEnable=true
AutoLoginUser=musixuser cambié musixuser por mi usuario, ahora hay autologin para mi, esto crea alguna restricción?
El fichero alsa.conf esta en /usr/share/alsa/ (aunque no tengo claro que lo tengas que editar....) no este no hay que editarlo, porque ya está configurado para buscar .asoundrc y asound.conf
El sistema busca el fichero .asoundrc en $HOME Tambien hay un fichero de configuracion a nivel del sistema /etc/asound.conf (yo este no lo tengo). encontré ambos, estaban en blanco, asoundrc lo edité así para que me reconozca una delta 44 una delata 1010lt y una delta 66
# .asoundrc for trhee Deltas 66,1010LT,44 insame order # # Create virtual devices out of multiple soundcards. # JACK will need MMAP_COMPLEX support to use this. # ICE1712 chip has 12 capture channels and 10 playback channels. # No. of channels in slaves must equal 12 for capture and 10 for playback # otherwise "invalid argument" errors result. pcm.multi_capture16 { type multi slaves.a.pcm hw:0 slaves.a.channels 12 slaves.b.pcm hw:1 slaves.b.channels 12 slaves.c.pcm hw:3 slaves.c.channels 12 # First 4 channels of first soundcard (capture) bindings.0.slave a bindings.0.channel 0 bindings.1.slave a bindings.1.channel 1 bindings.2.slave a bindings.2.channel 2 bindings.3.slave a bindings.3.channel 3 # First 8 channels of second soundcard (capture) bindings.4.slave b bindings.4.channel 0 bindings.5.slave b bindings.5.channel 1 bindings.6.slave b bindings.6.channel 2 bindings.7.slave b bindings.7.channel 3 bindings.8.slave b bindings.8.channel 4 bindings.9.slave b bindings.9.channel 5 bindings.10.slave b bindings.10.channel 6 bindings.11.slave b bindings.11.channel 7 # First 4 channels of third soundcard (capture) bindings.12.slave c bindings.12.channel 0 bindings.13.slave c bindings.13.channel 1 bindings.14.slave c bindings.14.channel 2 bindings.15.slave c bindings.15.channel 3 # S/PDIF section. Uncomment bindings if required. # S/PDIF first soundcard (capture) #bindings.16.slave a #bindings.16.channel 4 #bindings.17.slave a #bindings.17.channel 5 # S/PDIF second soundcard (capture) #bindings.18.slave b #bindings.18.channel 8 #bindings.19.slave b #bindings.19.channel 9 } ctl.multi_capture16 { type hw card 0 } pcm.multi_playback16 { type multi slaves.a.pcm hw:0 slaves.a.channels 10 slaves.b.pcm hw:1 slaves.b.channels 10 slaves.c.pcm hw:3 slaves.c.channels 10 # First 4 channels of first soundcard (playback) bindings.0.slave a bindings.0.channel 0 bindings.1.slave a bindings.1.channel 1 bindings.2.slave a bindings.2.channel 2 bindings.3.slave a bindings.3.channel 3 # First 8 channels of second soundcard (playback) bindings.4.slave b bindings.4.channel 0 bindings.5.slave b bindings.5.channel 1 bindings.6.slave b bindings.6.channel 2 bindings.7.slave b bindings.7.channel 3 bindings.8.slave b bindings.8.channel 4 bindings.9.slave b bindings.9.channel 5 bindings.10.slave b bindings.10.channel 6 bindings.11.slave b bindings.11.channel 7 # First 4 channels of third soundcard (playback) bindings.12.slave c bindings.12.channel 0 bindings.13.slave c bindings.13.channel 1 bindings.14.slave c bindings.14.channel 2 bindings.15.slave c bindings.15.channel 3 # S/PDIF section. Uncomment bindings if required. # S/PDIF first soundcard (playback) #bindings.16.slave a #bindings.16.channel 4 #bindings.17.slave a #bindings.17.channel 5 # S/PDIF second soundcard (playback) #bindings.18.slave b #bindings.18.channel 8 #bindings.19.slave b #bindings.19.channel 9 } ctl.multi_playback16 { type hw card 0 } pero no estoy muy seguro del orden que le da el sistema a las interfases, ya que la placa madre trae una integrada (cual era el comando para verlo?) no etoy muy seguro de que poner en asound.conf , si alguien tiene idea sería ideal que alguien que use varias deltas en su Daw pudiera compartir como es la configuracion con alsa jack y ardour, los textos sobre estos son confusos y el sistema me manda este mensaje de eror con x GTK+ icon theme is not properly set This usually means you don't have an XSETTINGS manager running. Desktop environment like GNOME or XFCE automatically execute their XSETTING managers like gnome-settings-daemon or xfce-mcs-manager. If you don't use these desktop environments, you have two choices: 1. run an XSETTINGS manager, or 2. simply specify an icon theme in ~/.gtkrc-2.0. For example to use the Tango icon theme add a line: gtk-icon-theme-name="Tango" in your ~/.gtkrc-2.0. (create it if no such file) NOTICE: The icon theme you choose should be compatible with GNOME, or the file icons cannot be displayed correctly. Due to the differences in icon naming of GNOME and KDE, KDE themes cannot be used. Currently there is no standard for this, but it will be solved by freedesktop.org in the future.
Estos dos ficheros (~/.asoundrc y /etc/asound.conf) ya estan en el alsa.conf
Salud y Suerte!!!!
Gracias de nuevo Camilo
El 15 de octubre de 2009 21:37, sonidos libertarios < [email protected]> escribió:
Saludos compas
Busco en musix 2.0 prerc Donde está alsa .conf y donde poner .asoundrc, como llamar asoundrc en alsa.conf.
Ademas: como eliminar el error de musixuser al inicio de kdm.
Gracias
saludos
------------------------------ ¡Crea carpetas para todos tus correos! ¡Hotmail te da todo el espacio que puedas necesitar! <http://mail.live.com/>
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
------------ próxima parte ------------ Se ha borrado un adjunto en formato HTML... URL: /pipermail/musix-usuarios/attachments/20091016/217b885f/attachment.htm
------------------------------
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
Fin de Resumen de Musix-usuarios, Vol 43, Envío 27 **************************************************
_________________________________________________________________ Revisa tus correos de Hotmail en tu BlackBerry - Clic Aquí http://www.windowsliveentublackberry.com
Saludos Creo que el .asoundrc y el asound.conf tienen el mismo objetivo... pero distinto ambito... el que esta en /etc es para toda la maquina y para todos los usuarios... el del home es para tu usuario. Si vas a usar mas de un usuario en esa maquina... te conviene poner la configuracion en /etc.... El tema del error de GTK es culpa mia.... hay un fichero en el home que se llama .gtkrc-2.0 (o algo parecido)... Dentro hay una ruta absoluta a /home/musixuser/<fichero> ... Solo tienes que quitar la parte absoluta... y dejar el fichero... Si no recuerdo mal es un "include" (perdona pero es que no tengo aqui el DVD) Has llegado a probar algo con el sistema de sonido? Cuando lo hagas cuentanos tus impresiones! Salud y Suerte!!!! El 16 de octubre de 2009 18:34, sonidos libertarios < [email protected]> escribió:
Saludos Daniel y compas!
gracias
Saludos
Para eliminar el error del musixuser tienes que editar el fichero /etc/kde3/kdm/kdmrc y comentar y/o configurar las lineas siguientes.
AutoLoginEnable=true
AutoLoginUser=musixuser cambié musixuser por mi usuario, ahora hay autologin para mi, esto crea alguna restricción?
El fichero alsa.conf esta en /usr/share/alsa/ (aunque no tengo claro que lo tengas que editar....) no este no hay que editarlo, porque ya está configurado para buscar .asoundrc y asound.conf
El sistema busca el fichero .asoundrc en $HOME Tambien hay un fichero de configuracion a nivel del sistema /etc/asound.conf (yo este no lo tengo). encontré ambos, estaban en blanco, asoundrc lo edité así para que me reconozca una delta 44 una delata 1010lt y una delta 66
# .asoundrc for trhee Deltas 66,1010LT,44 insame order # # Create virtual devices out of multiple soundcards. # JACK will need MMAP_COMPLEX support to use this. # ICE1712 chip has 12 capture channels and 10 playback channels. # No. of channels in slaves must equal 12 for capture and 10 for playback # otherwise "invalid argument" errors result.
pcm.multi_capture16 { type multi slaves.a.pcm hw:0 slaves.a.channels 12 slaves.b.pcm hw:1 slaves.b.channels 12 slaves.c.pcm hw:3 slaves.c.channels 12
# First 4 channels of first soundcard (capture) bindings.0.slave a bindings.0.channel 0 bindings.1.slave a bindings.1.channel 1 bindings.2.slave a bindings.2.channel 2 bindings.3.slave a bindings.3.channel 3
# First 8 channels of second soundcard (capture) bindings.4.slave b bindings.4.channel 0 bindings.5.slave b bindings.5.channel 1 bindings.6.slave b bindings.6.channel 2 bindings.7.slave b bindings.7.channel 3 bindings.8.slave b bindings.8.channel 4 bindings.9.slave b bindings.9.channel 5 bindings.10.slave b bindings.10.channel 6 bindings.11.slave b bindings.11.channel 7
# First 4 channels of third soundcard (capture) bindings.12.slave c bindings.12.channel 0 bindings.13.slave c bindings.13.channel 1 bindings.14.slave c bindings.14.channel 2 bindings.15.slave c bindings.15.channel 3
# S/PDIF section. Uncomment bindings if required.
# S/PDIF first soundcard (capture) #bindings.16.slave a #bindings.16.channel 4 #bindings.17.slave a #bindings.17.channel 5
# S/PDIF second soundcard (capture) #bindings.18.slave b #bindings.18.channel 8 #bindings.19.slave b #bindings.19.channel 9 }
ctl.multi_capture16 { type hw card 0 }
pcm.multi_playback16 { type multi slaves.a.pcm hw:0 slaves.a.channels 10 slaves.b.pcm hw:1 slaves.b.channels 10 slaves.c.pcm hw:3 slaves.c.channels 10
# First 4 channels of first soundcard (playback) bindings.0.slave a bindings.0.channel 0 bindings.1.slave a bindings.1.channel 1 bindings.2.slave a bindings.2.channel 2 bindings.3.slave a bindings.3.channel 3
# First 8 channels of second soundcard (playback) bindings.4.slave b bindings.4.channel 0 bindings.5.slave b bindings.5.channel 1 bindings.6.slave b bindings.6.channel 2 bindings.7.slave b bindings.7.channel 3 bindings.8.slave b bindings.8.channel 4 bindings.9.slave b bindings.9.channel 5 bindings.10.slave b bindings.10.channel 6 bindings.11.slave b bindings.11.channel 7
# First 4 channels of third soundcard (playback) bindings.12.slave c bindings.12.channel 0 bindings.13.slave c bindings.13.channel 1 bindings.14.slave c bindings.14.channel 2 bindings.15.slave c bindings.15.channel 3
# S/PDIF section. Uncomment bindings if required.
# S/PDIF first soundcard (playback) #bindings.16.slave a #bindings.16.channel 4 #bindings.17.slave a #bindings.17.channel 5
# S/PDIF second soundcard (playback) #bindings.18.slave b #bindings.18.channel 8 #bindings.19.slave b #bindings.19.channel 9 }
ctl.multi_playback16 { type hw card 0 }
pero no estoy muy seguro del orden que le da el sistema a las interfases, ya que la placa madre trae una integrada (cual era el comando para verlo?) no etoy muy seguro de que poner en asound.conf , si alguien tiene idea sería ideal que alguien que use varias deltas en su Daw pudiera compartir como es la configuracion con alsa jack y ardour, los textos sobre estos son confusos
y el sistema me manda este mensaje de eror con x
GTK+ icon theme is not properly set
This usually means you don't have an XSETTINGS manager running. Desktop environment like GNOME or XFCE automatically execute their XSETTING managers like gnome-settings-daemon or xfce-mcs-manager.
If you don't use these desktop environments, you have two choices: 1. run an XSETTINGS manager, or 2. simply specify an icon theme in ~/.gtkrc-2.0. For example to use the Tango icon theme add a line: gtk-icon-theme-name="Tango" in your ~/.gtkrc-2.0. (create it if no such file)
NOTICE: The icon theme you choose should be compatible with GNOME, or the file icons cannot be displayed correctly. Due to the differences in icon naming of GNOME and KDE, KDE themes cannot be used. Currently there is no standard for this, but it will be solved by freedesktop.org in the future.
Estos dos ficheros (~/.asoundrc y /etc/asound.conf) ya estan en el alsa.conf
Salud y Suerte!!!!
Gracias de nuevo
Camilo
El 15 de octubre de 2009 21:37, sonidos libertarios < [email protected]> escribió:
Saludos compas
Busco en musix 2.0 prerc Donde está alsa .conf y donde poner .asoundrc, como llamar asoundrc en alsa.conf.
Ademas: como eliminar el error de musixuser al inicio de kdm.
Gracias
saludos
------------------------------ ¡Crea carpetas para todos tus correos! ¡Hotmail te da todo el espacio
que
puedas necesitar! <http://mail.live.com/>
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
------------ próxima parte ------------ Se ha borrado un adjunto en formato HTML... URL: /pipermail/musix-usuarios/attachments/20091016/217b885f/attachment.htm
------------------------------
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
Fin de Resumen de Musix-usuarios, Vol 43, Envío 27 **************************************************
------------------------------ Ingresa a tu Hotmail desde tu Messenger. ¡Windows Live hace tu vida más simple! <http://www.microsoft.com/latam/windows/windowslive/default.aspx>
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-usuarios mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
Hola... Esta es mi configuración de este archivo para una tarjeta de portatil: Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) # dmixer, dsnooper and duplex virtual devices for hda-intel pcm.dmixer { type dmix ipc_key 1024 slave { pcm "hda-intel" period_time 0 period_size 1024 buffer_size 8192 # format "S32_LE" # periods 128 rate 44100 } bindings { 0 0 1 1 } } pcm.dsnooper { type dsnoop ipc_key 2048 ipc_key_add_uid yes slave { pcm "hda-intel" channels 2 period_size 1024 buffer_size 4096 rate 44100 periods 0 period_time 0 } bindings { 0 0 1 1 } } pcm.duplex { type asym playback.pcm "dmixer" capture.pcm "dsnooper" } ctl.duplex { type plug slave.pcm "hda-intel" } # default alsa device pcm.!default { type plug slave.pcm "duplex" } pcm.default { type plug slave.pcm "duplex" } ctl.!default { # type plug # slave.pcm "hda-intel" type hw card 0 } ctl.default { # type plug # slave.pcm "hda-intel" type hw card 0 } # aoss pcm.dsp0 { type plug slave.pcm "hda-intel" } ctl.dsp0 { type plug slave.pcm "hda-intel" } ctl.mixer0 { type plug slave.pcm "hda-intel" } # hardware pcm.hda-intel { type hw card 0 } ctl.hda-intel { type hw card 0 } Salud!
participants (3)
-
Daniel Vidal -
sonidos libertarios -
Suso Comesaña