Saludos
A ver... Dos cosas... La primera es que todo lo que he leido sobre unir dos tarjetas habla de errores... ¿Lo habias conseguido antes? ¿Con la version 1.0 de MUSIX? Tu asoundrc es bastante diferente del que proponen en la web de alsa....Pero no se la importancia que tendra esto... Aunque parece que con la configuracion de alsa se podria arrancar jack desde qjack... ya que se crea una tarjeta virtual unica...
http://alsa.opensrc.org/index.php/TwoCardsAsOne
Tambien hablan de errores causados por el hecho de estar trabajando con dos tarjetas con señales de reloj distintas...
La segunda es que tenemos en los repos que estamos preparando para la 2.0 la ultimisima version del ardour. la 2.8.3-rev5940... Esta es la version que llevara MUSIX 2.0
Si quieres probar con esta nueva version tienes que hacer lo siguiente
Añadir este repo a tu sources.list
deb ftp://musix.ourproject.org/pub/musix/2.0/ lenny main
Despues tienes que importar la clave al apt...
gpg --keyserver subkeys.pgp.net --recv-keys 38369E915D803270
gpg -armor -export 5D803270 | apt-key add -
Despues intenta instalar el nuevo ardour como siempre... El repo esta en pruebas tambien... por favor... reportanos cualquier problema...
Al resto de lectores :DDD Esto es SOLO para los que estan testeando la 2.0 preRC ... No aseguro los resultados en otras versiones de musix...
Cuentanos como te va
Salud y Suerte!!!
Saludos nuevamente!
Corri strace ardour, esto me arroja el log.txt:
WARNING: Your system has a limit for maximum amount of locked memory!
This might cause Ardour to run out of memory before your system runs
out of memory. You can view the memory limit with 'ulimit -l', and it
is normally controlled by /etc/security/limits.conf
Ardour/GTK 2.8
(built using 4918 and GCC version 4.3.2)
theme_init() called from internal clearlooks engine
ardour: [INFO]: Ardour will be limited to 1024 open files
ardour: [INFO]: No H/W specific optimizations in use
ardour: [INFO]: looking for control protocols in /home/sonidoslibertarios/.ardour2/surfaces/:/usr/lib/ardour2/surfaces/
ardour: [INFO]: Control surface protocol discovered: "Generic MIDI"
powermate: Opening of powermate failed - No existe el fichero o el directorio
ardour: [INFO]: Control protocol powermate not usable
ardour: [INFO]: Control surface protocol discovered: "Mackie"
en consola los ultimos mensajes de errores fueron:
mprotect(0xae68e000, 4096, PROT_READ|PROT_WRITEno space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
) = 0
mprotect(0xae68f000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae690000, 4096, PROT_READ|PROT_WRITE) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
mprotect(0xae691000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae692000, 4096, PROT_READ|PROT_WRITE) = 0
gettimeofday(no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
{1256741225, 628940}, NULL) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
gettimeofday({1256741225, 645986}, NULL) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
mprotect(0xae693000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae694000, 4096, PROT_READ|PROT_WRITEno space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
) = 0
mprotect(0xae695000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae696000, 4096, PROT_READ|PROT_WRITE) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
mprotect(0xae697000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae698000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae699000, 4096, PROT_READ|PROT_WRITEno space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
mprotect(0xae69a000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0xae69b000, 4096, PROT_READ|PROT_WRITE) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
gettimeofday({1256741225, 688946}, NULL) = 0
mprotect(0xae69c000, 4096, PROT_READ|PROT_WRITE) = 0
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
no space in Ardour-UI request buffer for thread unknown
Esta vez no corrí jackd en tpo real el error es el mismo
gracias
> Hola.
>
>
> Saludos!
> > logre esto en musix 2.0 pre-rc
> > con este .asoundrc (más abajo) logre reproducir mis deltas 44, 66 y 1010lt
> > (no estoy sincronizando por spdif por la sencilla razon que no podría con la
> > 44 pues no tiene) una sesión de ardour 2 con un tema que grabe hace un
> > tiempo solo con la delta 66; con este comado jackd -d alsa -C capture16 -P
> > playback16 -p 256 , tengo acceso a las conexiones tanto en patchage como en
> > qjackctl (si lo detengo y vuelvo a iniciar de este ultimo los valores
> > cambian por los del setup osea solo 1 interfase, hay alguna manera de
> > iniciar jack predeterminadamente con estos valores de manera grafica sin
> > tener q escribir comandos?) , esto es a los 16 canales de entrada y salida;
> > aunque me da algunos xruns con solo iniciar de este modo, estos incrementan
> > al rerproducir, con una sola tajeta no tengo ninguno. Confirme señal tanto
> > para los canales de salidads del 1 al 4 y del 12 al 16 (esto es tarjetas 44
> > y 66; por el momento estoy haciendo las pruebas en casa ya q estamos mudando
> > el estudio, no tengo consola ni mucho cables y formas de monitorear), esto
> > es bueno, ahora se complica.
> > Al momento de grabar ardour se pega. tanto creando 16 pistas con los 16
> > canales o crear 1 con 1 canal, con suerte en un intento logre que
> > reprodujese y grabase por un segundo o menos y se pega, al correr ardour
> > desde la consola aparece el siguiente mensaje una y otra vez a sin parar: no
> > space in ardour-ui request buffer for thread unknow , lo unico es cerrarlo
> > porque no lo puedo parar ni pausar ni nada, he hecho pruebas como root y
> > como usuario normal, es =. todo parece andar bien con solo una tarjeta,
> > estoy consciente que hay que pulir el comando de inicio de jack pero de eso
> > no sé nada, sin alguien me echa una manito sería grandioso...
> > la idea es poder echarlo a grabar esta semana, para llegar a hacer las
> > pruebas sin problemas la proxima semana, que vamos a encerrarno a hacer
> > pruebas. eche a correr la verificacion de tiempo real en musixcontrol y
> > parece andar bien. adjutno pcinfo
> >
> > Gracias de antemano
> >
> > Camilo
> >
>
> No veo nada en el pcinfo que nos dé un detalle de que es lo que te congela
> el equipo. Está claro que debe ser la configuración de las tarjetas de
> sonido, pero ya te digo no veo nada extraño que diga donde está exactamente
> el fallo.
>
> Debieras de revisar el archivo /var/log/syslog , a ver si tiene algún tipo
> de warnig o error respecto a alsa o a el ardur.
>
> Si no ves nada extraño en ese archivo, debieras de instalar "strace" y en
> consola lanzarlo con el programa que te produce el fallo. La salida la
> mandas a un archivo ( ejemplo: strace ardour2 > salida-log.txt ).
>
> A ver si pudieramos entre todos dar con algo que nos repare el problema.
>
>
> Saludos.
>
>
>
> >
> > # .asoundrc for trhee Deltas 66,1010LT,44 insame order
> > #
> > # Create virtual devices out of multiple soundcards.
> > # JACK will need MMAP_COMPLEX support to use this.
> > # ICE1712 chip has 12 capture channels and 10 playback channels.
> > # No. of channels in slaves must equal 12 for capture and 10 for playback
> > # otherwise "invalid argument" errors result.
> >
> > pcm.capture16 {
> > type multi
> > slaves.a.pcm hw:0
> > slaves.a.channels 12
> > slaves.b.pcm hw:1
> > slaves.b.channels 12
> > slaves.c.pcm hw:2
> > slaves.c.channels 12
> >
> >
> > # First 4 channels of first soundcard (capture)
> > bindings.0.slave a
> > bindings.0.channel 0
> > bindings.1.slave a
> > bindings.1.channel 1
> > bindings.2.slave a
> > bindings.2.channel 2
> > bindings.3.slave a
> > bindings.3.channel 3
> >
> > # First 8 channels of second soundcard (capture)
> > bindings.4.slave b
> > bindings.4.channel 0
> > bindings.5.slave b
> > bindings.5.channel 1
> > bindings.6.slave b
> > bindings.6.channel 2
> > bindings.7.slave b
> > bindings.7.channel 3
> > bindings.8.slave b
> > bindings.8.channel 4
> > bindings.9.slave b
> > bindings.9.channel 5
> > bindings.10.slave b
> > bindings.10.channel 6
> > bindings.11.slave b
> > bindings.11.channel 7
> >
> > # First 4 channels of third soundcard (capture)
> > bindings.12.slave c
> > bindings.12.channel 0
> > bindings.13.slave c
> > bindings.13.channel 1
> > bindings.14.slave c
> > bindings.14.channel 2
> > bindings.15.slave c
> > bindings.15.channel 3
> >
> > # S/PDIF section. Uncomment bindings if required.
> >
> > # S/PDIF first soundcard (capture)
> > #bindings.16.slave a
> > #bindings.16.channel 4
> > #bindings.17.slave a
> > #bindings.17.channel 5
> >
> > # S/PDIF second soundcard (capture)
> > #bindings.18.slave b
> > #bindings.18.channel 8
> > #bindings.19.slave b
> > #bindings.19.channel 9
> > }
> >
> > ctl.capture16 {
> > type hw
> > card 0
> > }
> >
> > pcm.playback16 {
> > type multi
> > slaves.a.pcm hw:0
> > slaves.a.channels 10
> > slaves.b.pcm hw:1
> > slaves.b.channels 10
> > slaves.c.pcm hw:2
> > slaves.c.channels 10
> >
> >
> > # First 4 channels of first soundcard (playback)
> > bindings.0.slave a
> > bindings.0.channel 0
> > bindings.1.slave a
> > bindings.1.channel 1
> > bindings.2.slave a
> > bindings.2.channel 2
> > bindings.3.slave a
> > bindings.3.channel 3
> >
> > # First 8 channels of second soundcard (playback)
> > bindings.4.slave b
> > bindings.4.channel 0
> > bindings.5.slave b
> > bindings.5.channel 1
> > bindings.6.slave b
> > bindings.6.channel 2
> > bindings.7.slave b
> > bindings.7.channel 3
> > bindings.8.slave b
> > bindings.8.channel 4
> > bindings.9.slave b
> > bindings.9.channel 5
> > bindings.10.slave b
> > bindings.10.channel 6
> > bindings.11.slave b
> > bindings.11.channel 7
> >
> > # First 4 channels of third soundcard (playback)
> > bindings.12.slave c
> > bindings.12.channel 0
> > bindings.13.slave c
> > bindings.13.channel 1
> > bindings.14.slave c
> > bindings.14.channel 2
> > bindings.15.slave c
> > bindings.15.channel 3
> >
> >
> > # S/PDIF section. Uncomment bindings if required.
> >
> > # S/PDIF first soundcard (playback)
> > #bindings.16.slave a
> > #bindings.16.channel 4
> > #bindings.17.slave a
> > #bindings.17.channel 5
> >
> > # S/PDIF second soundcard (playback)
> > #bindings.18.slave b
> > #bindings.18.channel 8
> > #bindings.19.slave b
> > #bindings.19.channel 9
> > }
> >
> > ctl.playback16 {
> > type hw
> > card 0
> > }
> >
> > ------------------------------
> > Ingresa a tu Hotmail desde tu Messenger. ¡Windows Live hace tu vida más
> > simple! <http://www.microsoft.com/latam/windows/windowslive/default.aspx>
> >
> > _______________________________________________
> > Musix GNU+Linux - www.musix.org.ar
> > Musix-usuarios mailing list
> > Musix-usuarios@lists.ourproject.org
> > https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios
> >
> >
>
>
> --
> José A. González
>
> Siempre GNU Linux.
> ------------ próxima parte ------------
> Se ha borrado un adjunto en formato HTML...
> URL: /pipermail/musix-usuarios/attachments/20091027/15566365/attachment.html
Nuevo Windows 7: encuentra el equipo adecuado para ti. Obtén más información.
_______________________________________________
Musix GNU+Linux - www.musix.org.ar
Musix-usuarios mailing list
Musix-usuarios@lists.ourproject.org
https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-usuarios