Re: [Musix-users] BEHRINGER UCG102
Jack problem is solved: First, the UCG102 digital conversion is only 16 bits. Secondly, it only samples at 3 rates - 32kHz, 44.1kHz and 48kHz. So I set Jackctl to 16 bit and 44.1. Still no success. I then abandoned Jackctl and went to jackd at the command line, and set the Frames/Period to 1024, and it crashed. Finlally, I increased Frames/Period to 2048 and jackd was running. With jackd stable from the command line, I started Jackcontrol, and jack remained stable. Next, it was time to test some applications. Both Ecamegapedal and Jackrack connected to jackd, applied effect treatments to my guitar, and produced sound through the headphones and recorded tracks to audacity. The short story is the Behringer UCG102 works with Jack, but may require some tweaking. -=cybersean=- ----- Original Message ---- From: Sean Edwards <[email protected]> To: Musix GNU+Linux users list <[email protected]> Sent: Saturday, December 29, 2007 1:25:57 PM Subject: Re: [Musix-users] BEHRINGER UCG102 I tried many combinations, but I will try again later tonight and post my results. -=cybersean=- ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
2007/12/30, Sean Edwards <[email protected]>:
Jack problem is solved:
First, the UCG102 digital conversion is only 16 bits. Secondly, it
only samples at 3 rates - 32kHz, 44.1kHz and 48kHz. So I set Jackctl
to 16 bit and 44.1. Still no success.
I then abandoned Jackctl and went to jackd at the command line, and set
the Frames/Period to 1024, and it crashed. Finlally, I increased
Frames/Period to 2048 and jackd was running.
And... is it usable at such latency?
With jackd stable from the command line, I started Jackcontrol, and
jack remained stable. Next, it was time to test some applications.
Both Ecamegapedal and Jackrack connected to jackd, applied effect
treatments to my guitar, and produced sound through the headphones and
recorded tracks to audacity.
The short story is the Behringer UCG102 works with Jack, but may require some tweaking.
Fine! Updated: http://www.musix.org.ar/wiki/index.php?title=Compatible-Audio#BEHRINGER_UCG1... How about changing the periods/buffers? Regards
-=cybersean=-
----- Original Message ---- From: Sean Edwards <[email protected]> To: Musix GNU+Linux users list <[email protected]> Sent: Saturday, December 29, 2007 1:25:57 PM Subject: Re: [Musix-users] BEHRINGER UCG102
I tried many combinations, but I will try again later tonight and post my results.
-=cybersean=-
____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-users mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-users
-- -- Marcos Guglielmetti * Director del desarrollo de Musix GNU+Linux, 100% Software Libre * CD Download: (http://www.musix.org.ar/en/) * Videos, programas y otras cosas en: ftp://musix.ourproject.org/pub/musix/ * Reporte de errores a: https://www.musix.org.ar/wiki/index.php?title=Problemas-Bugs *IRC: #musix channel on freenode
participants (2)
-
Marcos Guglielmetti -
Sean Edwards