#!/bin/bash # /KNOPPIX/etc/init.d/knoppix-autoconfig # Basic system configuration and hardware setup # (C) Klaus Knopper 2005 # Translation Víctor Alonso # Algunas modificaciones por Marcos Guglielmetti # Para Musix GNU+Linux # Agregado: HOME=/root #Si se pasó el parámetro english durante el booteo, vamos al script en inglés # si fuimos llamados en inglés desde la linea de boot: (queda en grub) if grep -w -q "lang=en" /proc/cmdline ; then echo "*** English Start-up script ***" # ejecuta el script inglés /etc/init.d/knoppix-autoconfigen exit 0 fi # Ya estaba: PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin" export PATH umask 022 # Ignore these signals: INT, TERM, SEGV trap "" 2 3 11 # ANSI COLORS CRE=" " NORMAL="" # RED: Failure or error message RED="" # GREEN: Success message GREEN="" # YELLOW: Descriptions YELLOW="" # BLUE: System messages BLUE="" # MAGENTA: Found devices or drivers MAGENTA="" # CYAN: Questions CYAN="" # BOLD WHITE: Hint WHITE="" ### Utility Function(s) # Simple shell grep stringinfile(){ case "$(cat $2)" in *$1*) return 0;; esac return 1 } # same for strings stringinstring(){ case "$2" in *$1*) return 0;; esac return 1 } # Reread boot command line; echo last parameter's argument or return false. getbootparam(){ stringinstring " $1=" "$CMDLINE" || return 1 result="${CMDLINE##*$1=}" result="${result%%[ ]*}" echo "$result" return 0 } # Check boot commandline for specified option checkbootparam(){ stringinstring " $1" "$CMDLINE" return "$?" } # Reinit USB devices that could not be started from linuxrc # Adopted from /etc/hotplug/usb.rc with some changes. # Calling /etc/hotplug/usb.rc directly can result in crashes due # to quite cautiousless module probing there. -KK usbreinit(){ LISTER=/usr/sbin/usbmodules test -x $LISTER || LISTER="$(type -p usbmodules 2>/dev/null)" [ -z "$LISTER" -o ! -f /proc/bus/usb/devices ] && return 1 # make sure the usb agent will run ACTION="add" ; PRODUCT="0/0/0" ; DEVFS="/proc/bus/usb" ; DEVICE= ; DEVPATH= export ACTION PRODUCT DEVFS DEVICE DEVPATH echo -n "sync:[" if [ -d /sys/bus/usb/devices ]; then # Kernel 2.6 for device in /sys/bus/usb/devices/*; do DEVPATH="${device#/sys/}" echo -n "${DEVPATH##*/}" " "; /etc/hotplug/usb.agent >/dev/null 2>&1 done else # Kernel 2.4 for DEVICE in /proc/bus/usb/*/*; do echo -n ${DEVICE##*/} " "; /etc/hotplug/usb.agent >/dev/null 2>&1 done fi echo -n "] " return 0 } # Try to mount this filesystem read-only, without or with encryption # trymount device|file mountpoint trymount(){ # Check if already mounted case "$(cat /proc/mounts)" in *\ $2\ *) return 0;; esac # Apparently, mount-aes DOES autodetect AES loopback files. [ -b "$1" ] && { mount -t auto -o ro "$1" "$2" 2>/dev/null; RC="$?"; } # We need to mount crypto-loop files with initial rw support [ -f "$1" ] && { mount -t auto -o loop,rw "$1" "$2" 2>/dev/null; RC="$?"; } # Mount succeeded? [ "$RC" = "0" ] && return 0 echo "" echo "${CYAN}Sistema de ficheros no detectado, intentando montar $1 con encriptación AES256${NORMAL}" a="s" while [ "$a" != "n" -a "$a" != "N" ]; do # We need to mount crypto-loop files with initial rw support mount -t auto -o loop,rw,encryption=AES256 "$1" "$2" && return 0 echo -n "${RED}Falló el montaje, ¿reintentar? [S/n] ${NORMAL}" # Problem with ioctl() from getpasswd()? read a read a done return 1 } ### EOF utility functions # We need /proc here, so mount it in case we skipped the bootfloppy [ -f /proc/version ] || mount -t proc /proc /proc 2>/dev/null stringinfile "/dev/pts" /proc/mounts || mount -t devpts /dev/pts /dev/pts 2>/dev/null # Kernel 2.6 [ -d /sys/devices ] || mount -t sysfs /sys /sys 2>/dev/null # Read in boot parameters # This should work, but doesn't with Kernel 2.4.19-rc1 # CMDLINE="$(/dev/null 2>&1; then USE_ALSA="yes" ALSA_CARD="$(getbootparam 'alsa' 2>/dev/null)" [ -n "$ALSA_CARD" ] || ALSA_CARD="autodetect" fi ### localization # Allow language specification via commandline. The default language # will be overridden via "lang=de" boot commandline LANGUAGE="$(getbootparam lang 2>/dev/null)" [ -n "$LANGUAGE" ] || LANGUAGE="es" # The default language/keyboard to use. This CANNOT be autoprobed. # Most of these variables will be used to generate the KDE defaults # and will be inserted into /etc/sysconfig/* below. case "$LANGUAGE" in de) # German version COUNTRY="de" LANG="de_DE@euro" KEYTABLE="de-latin1-nodeadkeys" XKEYBOARD="de" KDEKEYBOARD="de" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="us,fr" TZ="Europe/Berlin" ;; # Belgian version be) LANGUAGE="be" COUNTRY="be" LANG="C" KEYTABLE="be2-latin1" XKEYBOARD="be" KDEKEYBOARD="be" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="us,de,fr" TZ="Europe/Brussels" ;; # Bulgarian version bg) LANGUAGE="bg" COUNTRY="bg" LANG="bg_BG" KEYTABLE="bg" XKEYBOARD="bg" KDEKEYBOARD="bg" CHARSET="microsoft-cp1251" # Additional KDE Keyboards KDEKEYBOARDS="us,de,fr" TZ="Europe/Sofia" ;; # Swiss version (basically de with some modifications) ch) LANGUAGE="de" COUNTRY="ch" LANG="de_CH" KEYTABLE="sg-latin1" XKEYBOARD="de_CH" KDEKEYBOARD="de_CH" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Zurich" ;; cn) # Simplified Chinese version COUNTRY="cn" LANG="zh_CN.GB2312" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="us" CHARSET="gb2312.1980-0" # Additional KDE Keyboards KDEKEYBOARDS="us,de,fr" XMODIFIERS="@im=Chinput" TZ="Asia/Shanghai" ;; # Czech version cs|cz) LANGUAGE="cs" COUNTRY="cs" LANG="cs_CZ" KEYTABLE="cz-lat2" XKEYBOARD="cs" KDEKEYBOARD="cs" CHARSET="iso8859-2" # Additional KDE Keyboards KDEKEYBOARDS="us,de,fr" TZ="Europe/Prague" CONSOLEFONT="iso02g" ;; dk|da) # Dansk version COUNTRY="dk" LANG="da_DK" # Workaround: "dk" broken in gettext, use da:da_DK LANGUAGE="da:da_DK" # Keytable "dk" is correct. KEYTABLE="dk" XKEYBOARD="dk" KDEKEYBOARD="dk" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="dk,de,us,fr" TZ="Europe/Copenhagen" ;; es) # Spanish version LANGUAGE="es" COUNTRY="es" LANG="es_ES@euro" KEYTABLE="es" XKEYBOARD="es" KDEKEYBOARD="es" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Madrid" ;; ca) # Catalonian version COUNTRY="es" LANG="ca_ES@euro" LANGUAGE="ca" KEYTABLE="es" XKEYBOARD="es" KDEKEYBOARD="es" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Madrid" ;; gl) # Gaelician version COUNTRY="es" LANG="gl_ES@euro" LANGUAGE="gl" KEYTABLE="es" XKEYBOARD="es" KDEKEYBOARD="es" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Madrid" ;; eu) # Basque version COUNTRY="es" LANG="eu_ES@euro" LANGUAGE="eu" KEYTABLE="es" XKEYBOARD="es" KDEKEYBOARD="es" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Madrid" ;; fi) # Finnish version, though we may not have the kde-i18n files COUNTRY="fi" LANG="fi_FI@euro" KEYTABLE="fi" XKEYBOARD="fi" KDEKEYBOARD="fi" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="us" TZ="Europe/Helsinki" ;; fr) # French version COUNTRY="fr" LANG="fr_FR@euro" KEYTABLE="fr" XKEYBOARD="fr" KDEKEYBOARD="fr" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="de,us" TZ="Europe/Paris" ;; he|il) # Hebrew version LANGUAGE="he" COUNTRY="il" LANG="he_IL" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="il" CHARSET="iso8859-8" # Additional KDE Keyboards KDEKEYBOARDS="us,fr,de" TZ="Asia/Jerusalem" ;; ie) # Irish (English) version COUNTRY="ie" LANG="en_IE@euro" KEYTABLE="uk" XKEYBOARD="uk" KDEKEYBOARD="gb" CHARSET="iso8859-15" #Additional KDE Keyboards KDEKEYBOARDS="us,de,es,fr,it" TZ="Europe/Dublin" ;; it) # Italian version COUNTRY="it" LANG="it_IT@euro" KEYTABLE="it" XKEYBOARD="it" KDEKEYBOARD="it" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="fr,us,de" TZ="Europe/Rome" ;; ja) # (limited) Japanese version COUNTRY="jp" LANG="ja_JP" LANGUAGE="ja" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="us" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="fr,us,de" TZ="Asia/Tokyo" ;; nl) # Dutch version COUNTRY="nl" LANG="nl_NL@euro" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="en_US" CHARSET="iso8859-15" # Additional KDE Keyboards KDEKEYBOARDS="nl,de,fr" TZ="Europe/Amsterdam" ;; pl) # Polish version COUNTRY="pl" LANG="pl_PL" KEYTABLE="pl" XKEYBOARD="pl" KDEKEYBOARD="pl" CHARSET="iso8859-2" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Warsaw" CONSOLEFONT="iso02g" ;; ru) # Russian version COUNTRY="ru" LANG="ru_RU.KOI8-R" KEYTABLE="ru" XKEYBOARD="ru" KDEKEYBOARD="ru" CHARSET="koi8-r" CONSOLEFONT="Cyr_a8x16" # Additional KDE Keyboards KDEKEYBOARDS="de,us,fr" TZ="Europe/Moscow" ;; sk) # Slovak version (guessed) COUNTRY="sk" LANG="sk" KEYTABLE="sk-qwerty" XKEYBOARD="sk" KDEKEYBOARD="sk" CHARSET="iso8859-2" # Additional KDE Keyboards KDEKEYBOARDS="us,de" TZ="Europe/Bratislava" CONSOLEFONT="iso02g" ;; # Slovenian keyboard sl) LANGUAGE="sl" COUNTRY="si" LANG="sl_SI" KEYTABLE="slovene" XKEYBOARD="sl" KDEKEYBOARD="si" CHARSET="iso8859-2" # Additional KDE Keyboards KDEKEYBOARDS="us,de" TZ="Europe/Ljubljana" CONSOLEFONT="iso02g" ;; tr) # Turkish version (guessed) COUNTRY="tr" LANG="tr_TR" KEYTABLE="tr_q-latin5" XKEYBOARD="tr" KDEKEYBOARD="tr" CHARSET="iso8859-9" # Additional KDE Keyboards KDEKEYBOARDS="us,de,fr" TZ="Europe/Istanbul" ;; tw) # Traditional Chinese version (thanks to Chung-Yen Chang) COUNTRY="tw" LANG="zh_TW.Big5" LANGUAGE="zh_TW.Big5" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="us" # CHARSET="big5-0" CHARSET="iso8859-1" # Additional KDE Keyboards KDEKEYBOARDS="us" XMODIFIERS="@im=xcin" TZ="Asia/Taipei" ;; uk) # British version COUNTRY="uk" LANG="en_GB" LANGUAGE="en" KEYTABLE="uk" XKEYBOARD="uk" KDEKEYBOARD="gb" CHARSET="iso8859-1" # Additional KDE Keyboards KDEKEYBOARDS="us" TZ="Europe/London" ;; *) # American version LANGUAGE="us" COUNTRY="us" LANG="C" KEYTABLE="us" XKEYBOARD="us" KDEKEYBOARD="us" CHARSET="iso8859-1" # Additional KDE Keyboards KDEKEYBOARDS="de,fr" TZ="America/New_York" ;; esac # Export it now, so error messages get translated, too export LANG COUNTRY CHARSET # Allow keyboard override by boot commandline KKEYBOARD="$(getbootparam keyboard 2>/dev/null)" [ -n "$KKEYBOARD" ] && KEYTABLE="$KKEYBOARD" KXKEYBOARD="$(getbootparam xkeyboard 2>/dev/null)" if [ -n "$KXKEYBOARD" ]; then XKEYBOARD="$KXKEYBOARD" KDEKEYBOARD="$KXKEYBOARD" elif [ -n "$KKEYBOARD" ]; then XKEYBOARD="$KKEYBOARD" KDEKEYBOARD="$KKEYBOARD" fi ###################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### # MODIFICADO POR Marcos Guglielmetti para cargar xfce4 predeterminado # Also read desired desktop, if any DESKTOP="$(getbootparam desktop 2>/dev/null)" # Allow only supported windowmanagers case "$DESKTOP" in gnome|enlightenment|kde|larswm|xfce|xfce4|windowmaker|wmaker|icewm|fluxbox|openbox|twm|nx|rdp|kiosk) ;; *) DESKTOP="icewm"; ;; esac # Check if we are running from the Knoppix-CD or HD INSTALLED="" [ -e /KNOPPIX/bin/ash ] || INSTALLED="yes" TESTCD="" checkbootparam "testcd" >/dev/null 2>&1 && TESTCD="yes" #Modificado # Set hostname hostname Musix # Set clock (Local time is more often used than GMT, so it is default) UTC="" checkbootparam utc >/dev/null 2>&1 && UTC="-u" checkbootparam gmt >/dev/null 2>&1 && UTC="-u" KTZ="$(getbootparam tz 2>/dev/null)" [ -f "/usr/share/zoneinfo/$KTZ" ] && TZ="$KTZ" # hwclock uses the TZ variable export TZ hwclock $UTC -s KERNEL="$(uname -r)" echo "${GREEN}Ejecutando Linux Kernel ${YELLOW}$KERNEL${GREEN}.${NORMAL}" # Modificado echo "${GREEN}Bienvenid@ a ${YELLOW}Musix${GREEN} GNU+Linux${NORMAL}" if [ -n "$INSTALLED" ]; then echo "${BLUE}Ejecutando desde HD, comprobando sistema de ficheros...${NORMAL}" # We are running from HD, so a file system check is recommended [ -f /etc/init.d/checkroot.sh ] && /etc/init.d/checkroot.sh [ -f /etc/init.d/checkfs.sh ] && /etc/init.d/checkfs.sh fi # / must be read-write in any case, starting from here mount -o remount,rw / 2>/dev/null if [ -n "$INSTALLED" ]; then echo -n "${BLUE}Ejecutando desde HD, regenera ld.so.cache y modules.dep...${NORMAL}" # Regenerate ld.so.cache and module dependencies on HD ldconfig ; depmod -a 2>/dev/null # knoppix-installer bug workaround chmod 1777 /tmp 2>/dev/null echo "" fi if checkbootparam "splash" >/dev/null 2>&1 && [ -z "$TESTCD" ]; then RES=$(fbresolution 2>/dev/null) [ "$RES" = "1024x768" ] && [ -x /etc/init.d/splash.sh ] && /etc/init.d/splash.sh start fi update_progress() { # be sure we are non-blocking (echo "$1" > /etc/sysconfig/progress) & } rm -f /etc/localtime cp "/usr/share/zoneinfo/$TZ" /etc/localtime # Delete obsolete links and files before starting autoconfig if ! checkbootparam "nohwsetup"; then rm -f /dev/cdrom* /dev/cdwriter* /dev/mouse* /dev/modem* /dev/scanner* \ /etc/sysconfig/i18n /etc/sysconfig/keyboard /etc/sysconfig/knoppix \ /etc/environment \ 2>/dev/null fi # Write KNOPPIX config files for other scripts to parse # Standard variables/files echo "LANG=\"$LANG\"" > /etc/sysconfig/i18n echo "COUNTRY=\"$COUNTRY\"" >> /etc/sysconfig/i18n echo "LANGUAGE=\"$LANGUAGE\"" >> /etc/sysconfig/i18n echo "CHARSET=\"$CHARSET\"" >> /etc/sysconfig/i18n echo "XMODIFIERS=\"$XMODIFIERS\"" >> /etc/sysconfig/i18n #echo "TZ=\"$TZ\"" >> /etc/sysconfig/i18n # Default Keyboard layout for console and X echo "KEYTABLE=\"$KEYTABLE\"" > /etc/sysconfig/keyboard echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/keyboard echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/keyboard echo "KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/sysconfig/keyboard # Aquí cuarda el escritorio elegido________________________________________________ # Desired desktop echo "DESKTOP=\"$DESKTOP\"" > /etc/sysconfig/desktop # Write all, including non-standard variables, to /etc/sysconfig/knoppix echo "LANG=\"$LANG\"" > /etc/sysconfig/knoppix echo "COUNTRY=\"$COUNTRY\"" >> /etc/sysconfig/knoppix echo "LANGUAGE=\"$LANGUAGE\"" >> /etc/sysconfig/knoppix echo "CHARSET=\"$CHARSET\"" >> /etc/sysconfig/knoppix echo "KEYTABLE=\"$KEYTABLE\"" >> /etc/sysconfig/knoppix echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/knoppix echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/knoppix echo "KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/sysconfig/knoppix echo "DESKTOP=\"$DESKTOP\"" >> /etc/sysconfig/knoppix echo "TZ=\"$TZ\"" >> /etc/sysconfig/knoppix # OpenOffice & others echo "LANG=\"$LANG\"" > /etc/environment echo "LANGUAGE=\"$LANGUAGE\"" >> /etc/environment echo "LC_MESSAGES=\"$LC_MESSAGES\"" >> /etc/environment # No kernel messages while probing modules echo "0" > /proc/sys/kernel/printk # ide-scsi is no longer needed for any CD-Writer / reader utilities # Check for IDE-SCSI capable CD-Rom(s) first # WARNING: In Kernel 2.4.27, CD-Roms cease to work if both, ide-scsi and ide-cd, are loaded. :-( #if checkbootparam "idecd" || checkbootparam "atapicd"; then #modprobe ide-cd >/dev/null 2>&1 #else #modprobe ide-scsi >/dev/null 2>&1 #fi # For burning on IDE-CD-Roms, k3b (and others) check for special permissions CDROMS="" for DEVICE in /proc/ide/hd?; do [ "$(cat $DEVICE/media 2>/dev/null)" = "cdrom" ] && CDROMS="$CDROMS /dev/${DEVICE##*/}" done [ -n "$CDROMS" ] && { chown root.cdrom $CDROMS; chmod 666 $CDROMS; } 2>/dev/null # Bring up loopback interface now ifconfig lo 127.0.0.1 up # CD Checker if [ -n "$TESTCD" ]; then echo " ${BLUE}Comprobando la integridad de datos en el CD solicitado por la opción de arranque '${CYAN}testcd${BLUE}'.${NORMAL}" echo " ${BLUE}}Leyendo ficheros y comprobando KNOPPIX/md5sums, esto puede tardar un poco...${NORMAL}" echo -n "${RED}" ( cd /cdrom/ ; rm -f /tmp/md5sum.log ; LANG="$LANG" md5sum -v -c KNOPPIX/md5sums 2>&1 | tee /tmp/md5sum.log ) if [ "$?" = "0" ]; then echo "${GREEN}Todo parece correcto${NORMAL}" else echo "${RED} *** ERROR DE CHECKSUM PARA ESTOS FICHEROS: ***" egrep -v '(^md5sum:|OK$)' /tmp/md5sum.log echo "${RED} *** DATOS DE SU CD ESTÁN POSIBLEMENTE INCOMPLETOS O DAÑADOS, ***${NORMAL}" echo "${RED} *** O LA RAM DE SU ORDENADOR ESTÁ MAL. ***${NORMAL}" echo -n "${CYAN}Pulse return para seguir, o pulse el botón de reset para salir.${NORMAL}^G^G^G " read a fi fi # Print CPU info echo -n "${GREEN}" awk -F: '/^processor/{printf " El procesador"$2" es un "};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null echo -n "${NORMAL}" # KNOPPIX autoconfig update_progress 20 # HOTPLUG stuff # We should always set this, anyways echo "/sbin/hotplug-knoppix" > /proc/sys/kernel/hotplug if [ -d /proc/acpi ]; then # ACPI if checkbootparam "noacpi"; then echo " ${BLUE}Ignorando detección ACPI Bios como fue indicado en la linea de comandos del arranque.${NORMAL}" else echo -n " ${GREEN}Encontrada ACPI Bios, activando módulos:" found="" for a in /lib/modules/$KERNEL/kernel/drivers/acpi/*; do basename="${a##*/}" basename="${basename%%.*}" case "$basename" in *_acpi) egrep -qi "${basename%%_acpi}" /proc/acpi/dsdt 2>/dev/null || continue ;; esac modprobe $basename >/dev/null 2>&1 && echo -n " ${YELLOW}$basename${GREEN}" && found="yes" done test -z "$found" && echo -n "${BLUE}(none)" echo "${NORMAL}" fi else # APM if checkbootparam "noapm"; then echo " ${BLUE}Ignorando detección APM Bios como fue indicado en la linea de comandos del arranque.${NORMAL}" else modprobe apm power_off=1 >/dev/null 2>&1 && test -x /etc/init.d/apmd && /etc/init.d/apmd start && echo "${GREEN}Encontrada APM Bios, activadas funciones de gestión de energía.${NORMAL}" fi fi # First: PCMCIA Check/Setup # This needs to be done before other modules are being loaded by hwsetup if checkbootparam "nopcmcia"; then echo " ${BLUE}Ignorando detección PCMCIA como fue indicado en la linea de comandos del arranque.${NORMAL}" else modprobe pcmcia_core >/dev/null 2>&1 # Try Cardbus or normal PCMCIA socket drivers modprobe yenta_socket >/dev/null 2>&1 || modprobe i82365 >/dev/null 2>&1 || modprobe pd6729 >/dev/null 2>&1 || modprobe tcic >/dev/null 2>&1 if [ "$?" = "0" ]; then modprobe ds >/dev/null 2>&1 if [ -d /proc/bus/pccard ]; then echo "${GREEN}Encontrada PCMCIA, iniciando cardmgr.${NORMAL}" cardmgr >/dev/null 2>&1 && sleep 4 fi fi fi # USB enable if checkbootparam "nousb"; then echo " ${BLUE}Ignorando detección USB como fue indicado en la linea de comandos del arranque.${NORMAL}" else # USB/Mouse Check/Setup # This needs to be done before other modules are being loaded by hwsetup modprobe usbcore >/dev/null 2>&1 # We now try to load both USB modules, in case someone has 2 different # controllers FOUNDUSB="" USBREINIT="yes" USBMODULES="usb-uhci usb-ohci" case "$KERNEL" in 2.6.*) USBMODULES="uhci-hcd ohci-hcd";; esac for u in $USBMODULES; do if stringinfile "$u" /proc/modules; then FOUNDUSB="yes" elif modprobe "$u" >/dev/null 2>&1; then FOUNDUSB="yes" USBREINIT="" fi done if [ -n "$FOUNDUSB" ]; then echo -n "${GREEN}Encontrado USB, gestionado por ${MAGENTA}hotplug${GREEN}" # We have to do this here, because /proc/bus/usb does not seem to exist before # the lowlevel controller module(s) are loaded. case "$KERNEL" in 2.6.*) USBFS="usbfs";; *) USBFS="usbdevfs";; esac mount -o devmode=0666 -t $USBFS /proc/bus/usb /proc/bus/usb >/dev/null 2>&1 if [ -n "$USBREINIT" ]; then echo -n ": ${YELLOW}(Re-)escaneando dispositivos USB... "; usbreinit echo -n "Finalizado." else echo -n "." fi echo "${NORMAL}" else # For an unknown reason, unloading the usbcore module seems to hang sometimes. # umount /proc/bus/usb >/dev/null 2>&1 # rmmod usbcore 2>/dev/null true fi # Load USB mouse module, if not already present. This seems to be done automatically SOMETIMES, # but for some boards, it just neve happens and the mouse goes undetected. stringinfile "usbhid" /proc/modules || modprobe usbhid >/dev/null 2>&1 fi # Firewire enable if checkbootparam "nofirewire"; then echo " ${BLUE}Ignorando detección Firewire como fue indicado en la linea de comandos del arranque.${NORMAL}" else # We now try to load the firewire module modprobe ieee1394 >/dev/null 2>&1 FOUNDFIREWIRE="" FIREWIREREINIT="yes" if stringinfile ohci1394 /proc/modules; then FOUNDFIREWIRE="yes" FIREWIREREINIT="yes" elif modprobe ohci1394 >/dev/null 2>&1; then FOUNDFIREWIRE="yes" FIREWIREREINIT="" fi if [ -n "$FOUNDFIREWIRE" ]; then HOTPLUG="yes" echo -n "${GREEN}Encontrado Firewire, gestionado por ${MAGENTA}hotplug${GREEN}" if [ -n "$FIREWIREREINIT" -a -x /etc/hotplug.d/ieee1394/rescan-scsi-bus.sh ]; then echo -n ": ${YELLOW}(Re-)escaneando dispositivos Firewire... " /etc/hotplug.d/ieee1394/rescan-scsi-bus.sh >/dev/null 2>&1 echo -n "Finalizado." else echo -n "." fi echo "${NORMAL}" else # For an unknown reason, unloading the ieee1394 module seems to hang sometimes. # rmmod ieee1394 2>/dev/null true fi fi update_progress 40 # Second: Search & configure supported hardware # Check for options relevant to hwsetup NOAUDIO=""; HWSETUP_NOAUDIO="" checkbootparam noaudio >/dev/null 2>&1 && NOAUDIO="yes" checkbootparam nosound >/dev/null 2>&1 && NOAUDIO="yes" [ -n "$NOAUDIO" -o -n "$USE_ALSA" ] && HWSETUP_NOAUDIO="-a" NOSCSI=""; HWSETUP_NOSCSI="" checkbootparam noscsi >/dev/null 2>&1 && NOSCSI="yes" [ -n "$NOSCSI" ] && HWSETUP_NOSCSI="-s" if checkbootparam "nohwsetup"; then echo "${BLUE}Cargando perfil de hardware desde ${MAGENTA}/etc/modules${BLUE}.${NORMAL}" /etc/init.d/modutils start >/dev/null 2>/dev/null else echo -n "${WHITE}" if hwsetup -p $HWSETUP_NOAUDIO $HWSETUP_NOSCSI >/dev/null then echo -n "${NORMAL}" else echo " ${RED}Por favor, compruebe.${NORMAL}" fi fi # Add cdrom drives that have NOT been found by hwsetup (Kernel 2.6 bug?) while read drive name cdroms; do case "$drive$name" in drivename:) count=0 for cd in $cdroms; do cdnum="$((count++))" cddev="$cd" [ "$cdnum" = "0" ] && cdnum="" cdlink="/dev/cdrom$cdnum" [ -e "$cdlink" ] && continue ln -sf "$cddev" "$cdlink" done break ;; esac done </dev/null) EOT update_progress 60 # Read in what hwsetup has found [ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix # Mouse if [ -n "$MOUSE_DEVICE" ] then echo "${GREEN}El ratón es ${YELLOW}${MOUSE_FULLNAME}${GREEN} en ${MAGENTA}${MOUSE_DEVICE}${NORMAL}" fi # Soundcard if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" -o -n "$USE_ALSA" ] then # Setting micro input to zero to avoid subsonic disaster # if using alsa, this leads to error-messages [ -z "$USE_ALSA" ] && ( exec aumix -m 0 >/dev/null 2>&1 & ) SOUNDCARD="$SOUND_DRIVER" [ -n "$USE_ALSA" ] && SOUNDCARD="ALSA(${ALSA_CARD})" echo -n "${GREEN}Tarjeta de sonido:" [ -n "$SOUND_FULLNAME" ] && echo -n " ${YELLOW}$SOUND_FULLNAME${GREEN}" [ -n "$SOUNDCARD" ] && echo -n " driver=${MAGENTA}$SOUNDCARD" echo "${NORMAL}" fi # modificado por Marcos Guglielmetti - Julio 2005 # NOTA: todos estos intentos no dieron resultados, ya que los módulos eran # cargados pero luego no sonaba nada, y había módulos OSS cargados... ??? # Tratar de hacer que este método funcione TODO # descargando módulos anteriormente cargados #descargar-oss.sh #descargar-alsa.sh #/usr/sbin/alsa_init #/usr/sbin/alsa_snddevices # Intentado cargar los divers alsa #echo "${WHITE} Cargando los controladores snd-$SOUNDCARD para tu placa $SOUND_FULLNAME" #modprobe snd-$SOUNDCARD # Read default keyboard from config file. # There seems to be no reliable autoprobe possible. [ -f /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard # Set default keyboard before interactive setup [ -n "$KEYTABLE" ] && loadkeys -q $KEYTABLE [ -n "$CONSOLEFONT" ] && consolechars -f $CONSOLEFONT || consolechars -d # Check for blind option or brltty BLIND="" checkbootparam "blind" && BLIND="yes" BRLTTY="$(getbootparam brltty 2>/dev/null)" if [ -n "$BLIND" -o -n "$BRLTTY" ]; then if [ -x /sbin/brltty ]; then # Blind option detected, start brltty now. CMD=brltty BRLTYPE="" BRLDEV="" BRLTEXT="" if [ -n "$BRLTTY" ]; then # Extra options BRLTYPE="${BRLTTY%%,*}" R="${BRLTTY#*,}" if [ -n "$R" -a "$R" != "$BRLTTY" ]; then BRLTTY="$R" BRLDEV="${BRLTTY%%,*}" R="${BRLTTY#*,}" if [ -n "$R" -a "$R" != "$BRLTTY" ]; then BRLTTY="$R" BRLTEXT="${BRLTTY%%,*}" R="${BRLTTY#*,}" fi fi fi [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE" [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV" [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT" echo "${BLUE}Iniciando braille-display manager: ${GREEN}${CMD}${BLUE}.${NORMAL}" ( exec $CMD & ) sleep 2 fi fi if [ -n "$INTERACTIVE" ] then # Interactive configuration echo "${BLUE}Entrando en segunda fase de configuración interactiva.${NORMAL}" echo "${GREEN}Su teclado de consola por defecto a: ${MAGENTA}${KEYTABLE}" echo -n "${CYAN}¿Desea reconfigurar su teclado de consola?${NORMAL} [S/n] " read a [ "$a" != "n" ] && /usr/sbin/kbdconfig # kbdconfig already loads the keyboard if modified. echo -n "${CYAN}¿Desea reconfigurar su tarjeta de sonido?${NORMAL} [S/n] " read a [ "$a" != "n" ] && sndconfig && ( exec aumix -m 0 >/dev/null 2>&1 & ) if [ -n "$MOUSE_FULLNAME" -o -n "$MOUSE_DEVICE" ] then echo -n "${GREEN}Su ratón ha sido detectado como: ${MAGENTA}" ls -l /dev/mouse | awk '{print $9 " " $10 " " $11}' echo -n "${NORMAL}" fi echo -n "${CYAN}¿Desea reconfigurar su ratón?${NORMAL} [S/n] " read a [ -f /etc/sysconfig/mouse ] && . /etc/sysconfig/mouse [ "$a" != "n" ] && mouseconfig fi if checkbootparam noagp; then echo " ${BLUE}Ignorando detección AGP como fue indicado en la linea de comandos del arranque.${NORMAL}" else # Probe for AGP. Hope this can fail safely stringinfile "AGP" "/proc/pci" 2>/dev/null && { modprobe agpgart || modprobe agpgart agp_try_unsupported=1; } >/dev/null 2>&1 && echo " ${YELLOW}AGP bridge${GREEN} detectado." fi update_progress 80 # KNOPPIX automatic XFree86 Setup if ! checkbootparam "nomkxf86config"; then [ -x /usr/sbin/mkxf86config ] && /usr/sbin/mkxf86config fi # Read in changes [ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix if [ -n "$INTERACTIVE" ] then echo -n "${CYAN}¿Desea reconfigurar su subsistema gráfico (X11)?${NORMAL} [S/n] " read a [ "$a" != "n" ] && xf86cfg -textmode -xf86config /etc/X11/XF86Config-4 >/dev/console 2>&1 /dev/null 2>&1 # Export ALSA_CARD cariable to init script case "$ALSA_CARD" in auto*) ALSA_CARD="";; esac ALSA_CARD="$ALSA_CARD" /etc/init.d/alsa-autoconfig # Something went wrong ? [ ! -r /etc/modules.conf ] && ln -sf /KNOPPIX/etc/modules.conf /etc/modules.conf fi RUNLEVEL="$(runlevel)" AUTOMOUNTER="" [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes" addautomount(){ # /dev/device options d="${1##*/}" if [ -n "$AUTOMOUNTER" ]; then [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d" [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d" anew="$d -fstype=auto,$2 :$i" stringinfile "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt AUTOMOUNTS="$AUTOMOUNTS $d" new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0" else [ -d /mnt/$d ] && mkdir -p /mnt/$d new="$1 /mnt/$d auto users,noauto,exec,$2 0 0" fi stringinfile "$new" "/etc/fstab" || echo "$new" >> /etc/fstab } AUTOMOUNTS="floppy cdrom" # Add new devices to /etc/fstab and /etc/auto.mnt for i in /dev/cdrom?*; do if [ -L $i ]; then addautomount "$i" "ro" fi done NOSWAP="" checkbootparam "noswap" && NOSWAP="yes" # Collect partitions from /proc/partitions partitions="" while read major minor blocks partition relax; do partition="${partition##*/}" [ -z "$partition" -o ! -e "/dev/$partition" ] && continue case "$partition" in hd?) ;; # IDE Harddisk, entire disk sd?) ;; # SCSI Harddisk, entire disk ub?) ;; # USB Harddisk, entire disk [hs]d*|ub*) partitions="$partitions /dev/$partition";; # IDE, USB or SCSI disk partition esac done </dev/null && echo hd[a-z]); do if test -d /proc/ide/$d; then if egrep -q 'using_dma[ \t]+0' /proc/ide/$d/settings 2>/dev/null; then MODEL="$(cat /proc/ide/$d/model 2>/dev/null)" test -z "$MODEL" && MODEL="[GENERIC IDE DEVICE]" echo "${BLUE}Activando aceleración DMA para: ${MAGENTA}$d ${YELLOW}[${MODEL}]${NORMAL}" echo "using_dma:1" >/proc/ide/$d/settings fi fi done fi # Start creating /etc/fstab with HD partitions and USB SCSI devices now if checkbootparam "nofstab"; then echo " ${BLUE}Ignorando creación de /etc/fstab como fue indicado en la linea de comandos del arranque.${NORMAL}" else echo -n "${BLUE}Escaneando particiones del disco duro y creando ${YELLOW}/etc/fstab${BLUE}... " rebuildfstab -r -u knoppix -g knoppix >/dev/null 2>&1 if [ -e /var/run/rebuildfstab.pid ]; then # Another instance of rebuildfstab, probably from hotplug, is still running, so just wait. sleep 8 fi echo "${GREEN}Finalizado.${NORMAL}" fi findfreeloop(){ i=0 for i in 0 1 2 3 4 5 6 7; do LOOP="/dev/loop$i" losetup "$LOOP" >/dev/null 2>&1 || { echo "$LOOP"; return 0; } done return 1 } # Scan for swap, config, homedir KNOPPIX_IMG="" KNOPPIX_SWP="" HOMEDIR="$(getbootparam home)" if [ -n "$partitions" ]; then while read p m f relax; do case "$p" in *fd0*|*proc*|*sys*|*\#*) continue;; esac options="users,exec" fnew="" case "$f" in swap) if [ -n "$NOSWAP" ]; then echo "${BLUE}Ignorando partición de swap ${MAGENTA}$p${BLUE} como fue solicitado.${NORMAL}" else echo "${BLUE}Usando partición swap ${MAGENTA}$p${BLUE}.${NORMAL}" swapon $p 2>/dev/null fi continue ;; esac # Create mountdir if not already present case "$m" in *none*) continue ;; esac [ -d "$m" ] || mkdir -p "$m" # WARNING: NTFS RW mounts are only safe since Kernel 2.6.11 (overwrite existing files is OK) [ "$f" = "ntfs" -a "${KERNEL%.*}" != "2.6" ] && continue MOUNTOPTS="ro" case "$f" in vfat|msdos|ntfs) MOUNTOPTS="$MOUNTOPTS,uid=knoppix,gid=knoppix" ;; ext3|ext3|reiserfs|xfs) MOUNTOPTS="$MOUNTOPTS,noatime" ;; *) continue ;; esac mount -o "$MOUNTOPTS" -t $f $p $m 2>/dev/null || continue # Activate swapfile, if exists SWAPFILE="$(ls -1d $m/[Kk][Nn][Oo][Pp][Pp][Ii][Xx].[Ss][Ww][Pp] 2>/dev/null)" if [ -z "$NOSWAP" -a -n "$SWAPFILE" -a -f "$SWAPFILE" ]; then mount -o remount,rw $m swapon "$SWAPFILE" 2>/dev/null ; RC="$?" if [ "$RC" != "0" -a "$f" = "ntfs" ]; then LOOP="$(findfreeloop)" losetup "$LOOP" "$SWAPFILE" && swapon "$LOOP" RC="$?" if [ "$RC" = "0" ]; then echo "${GREEN}Mapping ${MAGENTA}$SWAPFILE${GREEN}->${MAGENTA}$LOOP${GREEN}.${NORMAL}" SWAPFILE="$LOOP" else losetup -d "$LOOP" fi fi if [ "$RC" = "0" ]; then echo "${GREEN}Usando archivo swap de MUSIX ${MAGENTA}$SWAPFILE${GREEN}.${NORMAL}" fnew="$SWAPFILE swap swap defaults 0 0" stringinfile "$fnew" "/etc/fstab" || echo "$fnew" >> /etc/fstab KNOPPIX_SWP="$KNOPPIX_SWP $SWAPFILE" fi mount -o remount,ro $m 2>/dev/null fi IMAGE="$(ls -1d $m/[Kk][Nn][Oo][Pp][Pp][Ii][Xx].[Ii][Mm][Gg] 2>/dev/null)" if [ -z "$INSTALLED" -a -z "$KNOPPIX_IMG" -a -n "$IMAGE" -a -f "$IMAGE" ]; then if [ -n "$HOMEDIR" ]; then if [ "$HOMEDIR" != "scan" -a "$HOMEDIR" != "$IMAGE" -a "$HOMEDIR" != "${IMAGE%/*.*}" ]; then continue fi fi if type -a knoppix-image >/dev/null 2>&1 && knoppix-image "$IMAGE" /dev/console 2>&1; then KNOPPIX_IMG="$IMAGE" mount -o remount,ro $m 2>/dev/null fi fi # Umount, if not in use umount -r $m 2>/dev/null done </dev/console 2>&1 /usr/sbin/mkdosswapfile /dev/console 2>&1 fi # Fat-Client-Version: DHCP Broadcast for IP address if checkbootparam "nodhcp"; then echo " ${BLUE}Ignorando detección broadcast DHCP como fue indicado en la linea de comandos del arranque.${NORMAL}" else NETDEVICES="$(awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null)" for DEVICE in $NETDEVICES do echo -n " ${GREEN}Dispositivo de red ${MAGENTA}$DEVICE${GREEN} detectado, broadcasting DHCP para obtener IP.${NORMAL}" trap 2 3 11 ifconfig $DEVICE up >/dev/null 2>&1 ; pump -i $DEVICE >/dev/null 2>&1 & trap "" 2 3 11 sleep 1 echo " ${BLUE}(Pasando a background)${NORMAL}" done fi # Search for custom background image for KDE/GNOME/X for i in /cdrom/KNOPPIX/background /usr/local/lib/knoppix; do for j in jpg png gif; do BACKGROUND="$i.$j" [ -e "$BACKGROUND" ] && break 2 done done echo 'BACKGROUND="'"$BACKGROUND"'"' >> /etc/sysconfig/knoppix findfile(){ FOUND="" # search all partitions for a file in the root directory for i in /mnt/[sh]d[a-z] /mnt/[sh]d[a-z][1-9] /mnt/[sh]d[a-z][1-9]?*; do # See if it's already mounted [ -f "$i/$1" ] && { echo "$i/$1"; return 0; } if [ -d "$i" ] && mount -r "$i" 2>/dev/null; then [ -f "$i/$1" ] && FOUND="$i/$1" umount -l "$i" 2>/dev/null [ -n "$FOUND" ] && { echo "$FOUND"; return 0; } fi done return 2 } update_progress 100 if checkbootparam "splash"; then sleep 1 /etc/init.d/splash.sh stop sleep 1 fi # Check for configuration floppy add-on if not running from HD if [ -z "$INSTALLED" -a -n "$MYCONF" ]; then FOUND_CONFIG="" if [ -n "$MYCONFDIR" ]; then case "$MYCONFDIR" in /dev/*) MYCONFDEVICE="${MYCONFDIR##/dev/}" MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}" MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}" MYCONFDIR="/mnt/${MYCONFDIR##/dev/}" ;; /mnt/*) MYCONFDEVICE="${MYCONFDIR##/mnt/}" MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}" MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}" ;; [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd]) MYCONFDIR="$(findfile knoppix.sh)" if [ -n "$MYCONFDIR" ]; then MYCONFDEVICE="${MYCONFDIR##/mnt/}" MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}" MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}" MYCONFDIR="${MYCONFMOUNTPOINT}" else FOUND_CONFIG="none" fi ;; *) echo "${CRE}${RED}configdir '$MYCONFDIR' especificado no válido (debe empezar con /dev/ o /mnt/ o 'scan').${NORMAL}" echo "${CRE}${RED}Opción ignorada.${NORMAL}" FOUND_CONFIG="invalid" ;; esac else MYCONFDEVICE="/dev/fd0" MYCONFMOUNTPOINT="/mnt/floppy" MYCONFDIR="/mnt/floppy" fi if [ -z "$FOUND_CONFIG" ]; then echo -n "${CRE}${BLUE}Comprobando ${MAGENTA}${MYCONFDIR}${BLUE} en busca de ficheros de configuración de MUSIX...${NORMAL}" if trymount "$MYCONFDEVICE" "$MYCONFMOUNTPOINT"; then MYCONFIG="$(ls -1d $MYCONFDIR/[Kk][Nn][Oo][Pp][Pp][Ii][Xx].[Ss][Hh] 2>/dev/null)" if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then echo "" FOUND_CONFIG="yes" echo "${GREEN}Encontrado, activando ahora ${MAGENTA}$MYCONFIG${GREEN}.${NORMAL}" echo "6" > /proc/sys/kernel/printk . "$MYCONFIG" "$MYCONFDIR" || true echo "0" > /proc/sys/kernel/printk fi umount "$MYCONFMOUNTPOINT" 2>/dev/null fi fi [ -n "$FOUND_CONFIG" ] || echo " ${BLUE}No está presente.${NORMAL}" fi # Check for extra shellscript on CD-Rom (/cdrom/KNOPPIX/knoppix.sh) MYCONFIG="$(ls -1d /cdrom/KNOPPIX/[Kk][Nn][Oo][Pp][Pp][Ii][Xx].[Ss][Hh] 2>/dev/null)" if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then echo "" FOUND_CONFIG="yes" echo "${GREEN}Fichero de configuración de MUSIX encontrado en el CD, ejecuntado ${MAGENTA}$MYCONFIG${GREEN}.${NORMAL}" echo "6" > /proc/sys/kernel/printk . "$MYCONFIG" /cdrom/KNOPPIX || true echo "0" > /proc/sys/kernel/printk fi if [ -n "$AUTOMOUNTER" ]; then # Check for floppy dir, reinstall with automounter [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom rm -f /etc/fstab.new # Replace paths from bootfloppy sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new mv -f /etc/fstab.new /etc/fstab # Start automounter now /etc/init.d/autofs start >/dev/null && echo "${GREEN}Automountador iniciado para: ${MAGENTA}${AUTOMOUNTS}${GREEN}.${NORMAL}" fi echo "6" > /proc/sys/kernel/printk # Re-enable signals trap 2 3 11 exit 0