On 17/08/05, Marcos Guglielmetti <[email protected]> wrote:

El Mié 17 Ago 2005 22:58, Pablo Baena escribió:

...

Holases! Me suscribí a la lista porque voy a estar jugando mucho con Musix! Gracias a Musix me volvió el interés por mi gran hobby que es la música!!!

Bienvenido........................................................ ¿no será mucho?

Quizá debamos hacerle un monumento en la Plaza San Martín...... sería....mmmm, un CD enorme...... no se me ocurre otra cosa :S Comparado con ese rallador de queso gigante que tienen en la plata estaria bueno. o un pingüino tocando la guitarra hecho en oro macizo. Adios.

___________________________________________________________ 1GB gratis, Antivirus y Antispam Correo Yahoo!, el mejor correo web del mundo http://correo.yahoo.com.ar

_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-Help mailing list [email protected] http://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-help

mi maquina es una p3 de 8000mh con 128 de ram y sonido via(andando) con video sis 6326 con 8 les mando le lilo config en dos mail separados para no mesclar la cosa anoche instale un devian woody para ber si se recuperaba pero ni bola a y tengo 26 años lo de jovatox es una vieja historia

lilo musix en hda3 # /etc/lilo.conf - See: 'lilo(8)' and 'lilo.conf(5)', # --------------- 'install-mbr(8)', '/usr/share/doc/lilo/', # and '/usr/share/doc/mbr/'. # +---------------------------------------------------------------+ # | !! Reminder !! | # | | # | Don't forget to run 'lilo' after you make changes to this | # | conffile, '/boot/bootmess.txt', or install a new kernel. The | # | computer will most likely fail to boot if a kernel-image | # | post-install script or you don't remember to run 'lilo'. | # | | # +---------------------------------------------------------------+ # Support LBA for large hard disks. # lba32 # Defines boot-time changes to partition type numbers change-rules reset # Overrides the default mapping between harddisk names and the BIOS' # harddisk order. Use with caution. #disk=/dev/hde # bios=0x81 #disk=/dev/sda # bios=0x80 # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/hda # Specifies the device that should be mounted as root. ('/') # root=/dev/hda3 # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using 'compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Default menu for Debian. (Using the images from debian-bootscreen) # from Philipp Wolfer <[email protected]>. bitmap=/boot/debian.bmp bmp-colors=1,,0,2,,0 bmp-table=120p,173p,1,15,17 bmp-timer=254p,432p,1,0,0 # Install the specified file as the new boot sector. # LILO supports built in boot sectory, you only need # to specify the type, choose one from 'text', 'menu' or 'bitmap'. # new: install=bmp old: install=/boot/boot-bmp.b # new: install=text old: install=/boot/boot-text.b # new: install=menu old: install=/boot/boot-menu.b or boot.b # default: 'menu' is default, unless you have a bitmap= line # Note: install=bmp must be used to see the bitmap menu. # install=menu # install=bmp install=bmp # Specifies the number of _tenths_ of a second LILO should # wait before booting the first image. LILO # doesn't wait if DELAY is omitted or if DELAY is set to zero. delay=20 # Prompt to use certaing image. If prompt is specified without timeout, # boot will not take place unless you hit RETURN prompt timeout=50 # Specifies the location of the map file. If MAP is # omitted, a file /boot/map is used. map=/boot/map # Specifies the VGA text mode that should be selected when # booting. The following values are recognized (case is ignored): # NORMAL select normal 80x25 text mode. # EXTENDED select 80x50 text mode. The word EXTENDED can be # abbreviated to EXT. # ASK stop and ask for user input (at boot time). # <number> use the corresponding text mode. A list of available modes # can be obtained by booting with vga=ask and pressing [Enter]. vga=791 # You can set a password here, and uncomment the 'restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an 'append' # statement in 'lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like 'Linux init=/bin/sh', # and thus becoming 'root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use 'install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM 'install-mbr(8)'. # # password=tatercounter2000 # You can put a customized boot message up if you like. If you use # 'prompt', and this computer may need to reboot unattended, you # must specify a 'timeout', or it will sit there forever waiting # for a keypress. 'single-key' goes with the 'alias' lines in the # 'image' configurations below. eg: You can press '1' to boot # 'Linux', '2' to boot 'LinuxOLD', if you uncomment the 'alias'. # # message=/boot/bootmess.txt # prompt # single-key # delay=100 # timeout=100 # Kernel command line options that apply to all installed images go # here. See: The 'boot-prompt-HOWO' and 'kernel-parameters.txt' in # the Linux kernel 'Documentation' directory. # # append="" # Boot up Linux by default. # default="Linux" image=/boot/vmlinuz label="Linux" initrd=/boot/initrd.img append="ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce" read-only image=/boot/vmlinuz-2.6.11 label="Linux(2.6)-1" initrd=/boot/initrd.img-2.6.11 append="ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce" read-only image=/boot/vmlinuz-2.6.11-1-386 label="Linux(2.6)-2" initrd=/boot/initrd.img-2.6.11-1-386 append="ramdisk_size=100000 init=/etc/init lang=es apm=power-off nomce" read-only # If you have another OS on this machine to boot, you can uncomment the # following lines, changing the device name on the 'other' line to # where your other OS' partition is. # # other=/dev/hda4 # label=HURD # restricted # alias=3 other=/dev/hda1 label="Windows(hda1)" other=/dev/hdb1 label="Windows(hdb1)"

Que grande! Musix tiene alcance internacional! :D Jovatox: mis viejos son uruguayos, y dos por tres van para alla. Si un dia necesitas que te alcancemos un CD de Musix te lo mando con ellos! :D On 8/18/05, [email protected] <[email protected]> wrote:

me olvide de decir que si puedo ver la particion sin problema cuando la monto del devian, o del kanoppix

_______________________________________________ Musix GNU+Linux - www.musix.org.ar <http://www.musix.org.ar> Musix-Help mailing list [email protected] http://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-help

--

There are a lot of us out there who both do and do not work for Sun

Wow! Quantum programmers!

pone cfdisk /dev/hda movete hasta donde dice hda3 y apreta enter en donde dice booteable despues pone escribir y si para aceptar y proba de nuevo. saludos On 22/08/05, [email protected] <[email protected]> wrote:

cuando mando el comando lilo despues de editar lilo.conf me manda esto added Linux* Skipping /vmlinus.old Fatal: First sector of /dev/hda3 doesn`t have a valid boot signature

la verdad que no se por donde mas entrarle pense en instalarlo en otro disco y despues copiarlo todo al mio respetando el modo en que se instalo pero no se me tiene repo

se agradece la ayuda

_______________________________________________ Musix GNU+Linux - www.musix.org.ar Musix-Help mailing list [email protected] http://lists.ourproject.org/cgi-bin/mailman/listinfo/musix-help

El Mié 24 Ago 2005 16:50, [email protected] escribió:

lo probe y no me da ni bola aparece el   hda1 hda2 hda3 boot y los demas pero ni jota le mande comando lilo y me sigue tirando el mismo error y talves pruebo instalarlo en hda2 o algo por el estilo un detalle talves importante me aparece como Reiself hda3 se instalo por defecto asi asumo que ests abien (hda2 es ext3 o 2 no me acuerdo)

gracias

Hacé una cosa, esto debería instalarlo si o si: Modificá una linea que va a hacer que grub sea el bootloader por default. el archivo es: /usr/share/knoppix-installer/modules/06-boot.bm y la linea que tenes que cambiar es esta: register_var "BOOT_LOADER" $"Seleccionar el gestor de arranque" "lilo|grub" "" "lilo" por esta: register_var "BOOT_LOADER" $"Seleccionar el gestor de arranque" "lilo|grub" "" "grub" Ya uqe manejás GNU Linux, creo que podés hacer eso iniciando desde Musix, cambiando esa "palabrita" "lilo" por "grub", y luego corrés knoppix-installer o "instalar" Se debería instalar correctamente, (eso ya está resuelto en la nueva versión 026) Contanos -- Marcos Guglielmetti www.pc-musica.com.ar -- Musix GNU+Linux (www.musix.org.ar) -- INCASOL (www.incasol.org.ar) -- Rosegarden Tutorial (http://rosegarden.sourceforge.net/tutorial/) -- cel: (0221) 15-5442691 fecha: mié ago 24 14:15:02 CEST 2005 ___________________________________________________________ 1GB gratis, Antivirus y Antispam Correo Yahoo!, el mejor correo web del mundo http://correo.yahoo.com.ar