cid:[email protected] For instance if the manual says that DTR is an output then the instrument should be a computer type. Any other use is outside of the standard. html for noteson how to display the news on your own web site, read it via e-mail or through a newsfeed viewer. To find out the communication settings use Control Panel's Device Manager as detailed in point 3 above. HampshirePermanentInstallation Project Manager -. In the eTire system, the measurements taken by the sensor are read at the vehicle's depot or a drive-by unit by a hand-held device that retrieves the data automatically. This is not always so: look at the computer's actual COM ports physically available and you may find a lower port number. The software can also perform calculations on the counts. The Windmill program successively opened for a fixed time interval one of the six solenoid valves sampling the air in the tunnels.