Paul wrote:

Hi Alf

On Monday 06 August 2007 10:46, Alf Skaar wrote:

...

emc2-ubuntu6.06-desktop-i386.iso bdi-4.51.iso

are ther any build that will run the back plot, under VMware 5

Sorry, can't help with VMware - It is not an application I've used (or had need to).

...

i have try the emc2-ubuntu6.06-desktop-i386.iso and that install fine but will not run

Wrong place to ask about that modified ubuntu build. Don't know what they've done to it, but it doesn't boot on any of the computers I have..

...

the bdi-4.51.iso will not install under VMware 5

Sounds very much like a VMware issue (unless anyone else knows the reason). If you are installing to a disk, why use VMware ?

To be able to run the back plot on the PC that i have the CAM software on to see how the g-code run, so i don't have to start the CNC pc that i have i think it are very useful for this, and important that the sim are run on the sam program that you will run the code in for the cut is this not needed ? be a beginner in this CAM, CNC, G-code I' just trying to make life easy Thanks to help from Jeff Epler I have it up and runing: Her are very short what i did: and i run vmware 5.5.4 (VMware-workstation-5.5.4-44386.exe) ************************************************************************ install ubuntu (ubuntu-6.06.1-desktop-i386.iso) ****************************************** vi /etc/apt/sources.list deb http://www.linuxcnc.org/emc2/ dapper emc2.1-sim deb-src http://www.linuxcnc.org/emc2/ dapper emc2.1-sim #coment univers out ****************************************** apt-get update # this fails apt-get emc2-sim # this works apt-get install emc2-sim emc2-dev ************************************************************************ Alf :-)

VMware will get in the way of any realtime operating system and produce very poor results.

Regards, Paul.

_______________________________________________ Bdi4emc-help mailing list [email protected] https://lists.ourproject.org/cgi-bin/mailman/listinfo/bdi4emc-help