Re: Re: [Bdi4emc-help] Problems of compiling EMC on BDI 4.38
Hi Jeff I've read those instructions, but I think they are instructions about compiling EMC2; Do you mean that I can use the same method to compile EMC 1.0-39 on BDI 4.38? I will try that tomorrow... Meng
------------------------------
Message: 6 Date: Wed, 15 Mar 2006 21:18:02 -0600 From: Jeff Epler <[email protected]> Subject: Re: [Bdi4emc-help] Problems of compiling EMC on BDI 4.38 To: "Help and advice for BDI-4 users." <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii
I wrote and tested these instructions this past weekend: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl/emcinfo.pl? BDI-4_38_Compile_EMC2
The best place to ask for help compiling emc2 may be the emc-users list. http://lists.sourceforge.net/lists/listinfo/emc-users
Jeff
Hi Meng On Friday 17 March 2006 02:35, ?? wrote:
I've read those instructions, but I think they are instructions about compiling EMC2; Do you mean that I can use the same method to compile EMC 1.0-39 on BDI 4.38? I will try that tomorrow...
Compiling the emc-1.0 sources is not quite the same as emc2, some of the configure options differ, as does the way install is done. There is also a difference in required package dependencies which is not made clear on that wiki page. Make sure you have the http://bdi4emc.ourproject/debian/ repository listed in your /etc/apt/sources.list, run an update followed by "apt-get build-dep emc". This should ensure all the required development packages are installed.. Then an "apt-get source emc" to download the current tarball. I've uploaded a new source package that should hopefully resolve the errors you were getting.. If you want to continue with the existing source tree, do: make KDIR=/usr/src/linux-headers-2.6.12.6-rtai Alternatively, you can edit the emc-1.0/src/Makefile and change line 138 to: KDIR = /usr/src/linux-headers-2.6.12.6-rtai Regards, Paul.
participants (2)
-
Paul -
沈濛